2-(2-溴-4-氯苯基)乙胺

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 4-(6-chloro-4-(ethoxycarbonyl)chroman-7-yloxy)benzoic acid (Preparation 1; 1.32 g; 3.52 mmol), 1-hydroxybenzotriazole hydrate (0.59 g; 3.85 mmol) and 2-(2-bromo-4-chlorophenyl)ethanamine (Preparation 5; 0.904 g; 3.85 mmol) in dry dimethylformamide (10 mL) was added 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride (0.806 g; 4.02 mmol) at ambient temperature. After stirring at ambient temperature for 5 hours, the solution was diluted with 100 mL of water, stirred for 10 minutes longer and then extracted with ethyl acetate (3×15 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by silica gel chromatography (Biotage 40M), eluting with hexane and ethyl acetate to provide ethyl 7-(4-(2-bromo-4-chlorophenethylcarbamoyl)phenoxy)-6-chlorochroman-4-carboxylate as a white solid (1.21 g). MS (apci, pos) m/z=594. stirred for 10 minutes longer extracted with ethyl acetate (3×15 mL) The combined organic layers were dried over sodium sulfate filtered concentrated in vacuo The residue was purified by silica gel chromatography (Biotage 40M) eluting with hexane and ethyl acetate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred suspension of lithium borohydride (0.39 g; 18.0 mmol) in 25 mL THF at ambient temperature was added chlorotrimethylsilane (3.9 g; 36.0 mmol), dropwise over 2 minutes. Gas was evolved and the mixture warmed slightly. After stirring for 20 minutes, gas evolution had ceased, and argon gas was bubbled through the mixture for 2 minutes to try to remove the remaining trimethylsilane that had formed. A solution of 2-bromo-4-chloro-1-(2-nitrovinyl)benzene (1.18 g; 4.5 mmol) in 20 mL tetrahydrofuran was then added dropwise with stirring at ambient temperature over 4 minutes. The resulting mixture was stirred and heated to reflux. After 2 hours, the heat was removed, and after cooling to ambient temperature, the mixture was cooled in an ice bath and carefully quenched with 25 mL methanol. The solvent was evaporated, and the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane. The organic layer was dried over sodium sulfate and evaporated to give 0.92 g of 2-(2-bromo-4-chlorophenyl)ethanamine as a cloudy yellow oil. MS (apci, pos) m/z=234. the mixture warmed slightly argon gas was bubbled through the mixture for 2 minutes to remove the remaining trimethylsilane that had formed with stirring at ambient temperature over 4 minutes The resulting mixture was stirred heated to reflux After 2 hours the heat was removed the mixture was cooled in an ice bath carefully quenched with 25 mL methanol The solvent was evaporated the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane The organic layer was dried over sodium sulfate evaporated

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 4-(6-chloro-4-(ethoxycarbonyl)chroman-7-yloxy)benzoic acid (Preparation 1; 1.32 g; 3.52 mmol), 1-hydroxybenzotriazole hydrate (0.59 g; 3.85 mmol) and 2-(2-bromo-4-chlorophenyl)ethanamine (Preparation 5; 0.904 g; 3.85 mmol) in dry dimethylformamide (10 mL) was added 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride (0.806 g; 4.02 mmol) at ambient temperature. After stirring at ambient temperature for 5 hours, the solution was diluted with 100 mL of water, stirred for 10 minutes longer and then extracted with ethyl acetate (3×15 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by silica gel chromatography (Biotage 40M), eluting with hexane and ethyl acetate to provide ethyl 7-(4-(2-bromo-4-chlorophenethylcarbamoyl)phenoxy)-6-chlorochroman-4-carboxylate as a white solid (1.21 g). MS (apci, pos) m/z=594. stirred for 10 minutes longer extracted with ethyl acetate (3×15 mL) The combined organic layers were dried over sodium sulfate filtered concentrated in vacuo The residue was purified by silica gel chromatography (Biotage 40M) eluting with hexane and ethyl acetate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred suspension of lithium borohydride (0.39 g; 18.0 mmol) in 25 mL THF at ambient temperature was added chlorotrimethylsilane (3.9 g; 36.0 mmol), dropwise over 2 minutes. Gas was evolved and the mixture warmed slightly. After stirring for 20 minutes, gas evolution had ceased, and argon gas was bubbled through the mixture for 2 minutes to try to remove the remaining trimethylsilane that had formed. A solution of 2-bromo-4-chloro-1-(2-nitrovinyl)benzene (1.18 g; 4.5 mmol) in 20 mL tetrahydrofuan was then added dropwise with stirring at ambient temperature over 4 minutes. The resulting mixture was stirred and heated to reflux. After 2 hours, the heat was removed, and after cooling to ambient temperature, the mixture was cooled in an ice bath and carefully quenched with 25 mL methanol. The solvent was evaporated, and the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane. The organic layer was dried over sodium sulfate and evaporated to give 0.92 g of 2-(2-bromo-4-chlorophenyl)ethanamine as a cloudy yellow oil. MS (apci, pos) m/z=234. the mixture warmed slightly argon gas was bubbled through the mixture for 2 minutes to remove the remaining trimethylsilane that had formed with stirring at ambient temperature over 4 minutes The resulting mixture was stirred heated to reflux After 2 hours the heat was removed the mixture was cooled in an ice bath carefully quenched with 25 mL methanol The solvent was evaporated the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane The organic layer was dried over sodium sulfate evaporated

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 4-(6-chloro-4-(ethoxycarbonyl)chroman-7-yloxy)benzoic acid (Preparation 1; 1.32 g; 3.52 mmol), 1-hydroxybenzotriazole hydrate (0.59 g; 3.85 mmol) and 2-(2-bromo-4-chlorophenyl)ethanamine (Preparation 5; 0.904 g; 3.85 mmol) in dry dimethylformamide (10 mL) was added 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride (0.806 g; 4.02 mmol) at ambient temperature. After stirring at ambient temperature for 5 hours, the solution was diluted with 100 mL of water, stirred for 10 minutes longer and then extracted with ethyl acetate (3×15 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by silica gel chromatography (Biotage 40M), eluting with hexane and ethyl acetate to provide ethyl 7-(4-(2-bromo-4-chlorophenethylcarbamoyl)phenoxy)-6-chlorochroman-4-carboxylate as a white solid (1.21 g). MS (apci, pos) m/z=594. stirred for 10 minutes longer extracted with ethyl acetate (3×15 mL) The combined organic layers were dried over sodium sulfate filtered concentrated in vacuo The residue was purified by silica gel chromatography (Biotage 40M) eluting with hexane and ethyl acetate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred suspension of lithium borohydride (0.39 g; 18.0 mmol) in 25 mL THF at ambient temperature was added chlorotrimethylsilane (3.9 g; 36.0 mmol), dropwise over 2 minutes. Gas was evolved and the mixture warmed slightly. After stirring for 20 minutes, gas evolution had ceased, and argon gas was bubbled through the mixture for 2 minutes to try to remove the remaining trimethylsilane that had formed. A solution of 2-bromo-4-chloro-1-(2-nitrovinyl)benzene (1.18 g; 4.5 mmol) in 20 mL tetrahydrofuran was then added dropwise with stirring at ambient temperature over 4 minutes. The resulting mixture was stirred and heated to reflux. After 2 hours, the heat was removed, and after cooling to ambient temperature, the mixture was cooled in an ice bath and carefully quenched with 25 mL methanol. The solvent was evaporated, and the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane. The organic layer was dried over sodium sulfate and evaporated to give 0.92 g of 2-(2-bromo-4-chlorophenyl)ethanamine as a cloudy yellow oil. MS (apci, pos) m/z=234. the mixture warmed slightly argon gas was bubbled through the mixture for 2 minutes to remove the remaining trimethylsilane that had formed with stirring at ambient temperature over 4 minutes The resulting mixture was stirred heated to reflux After 2 hours the heat was removed the mixture was cooled in an ice bath carefully quenched with 25 mL methanol The solvent was evaporated the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane The organic layer was dried over sodium sulfate evaporated

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 4-(6-chloro-4-(ethoxycarbonyl)chroman-7-yloxy)benzoic acid (Preparation 1; 1.32 g; 3.52 mmol), 1-hydroxybenzotriazole hydrate (0.59 g; 3.85 mmol) and 2-(2-bromo-4-chlorophenyl)ethanamine (Preparation 5; 0.904 g; 3.85 mmol) in dry dimethylformamide (10 mL) was added 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride (0.806 g; 4.02 mmol) at ambient temperature. After stirring at ambient temperature for 5 hours, the solution was diluted with 100 mL of water, stirred for 10 minutes longer and then extracted with ethyl acetate (3×15 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by silica gel chromatography (Biotage 40M), eluting with hexane and ethyl acetate to provide ethyl 7-(4-(2-bromo-4-chlorophenethylcarbamoyl)phenoxy)-6-chlorochroman-4-carboxylate as a white solid (1.21 g). MS (apci, pos) m/z=594. stirred for 10 minutes longer extracted with ethyl acetate (3×15 mL) The combined organic layers were dried over sodium sulfate filtered concentrated in vacuo The residue was purified by silica gel chromatography (Biotage 40M) eluting with hexane and ethyl acetate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred suspension of lithium borohydride (0.39 g; 18.0 mmol) in 25 mL THF at ambient temperature was added chlorotrimethylsilane (3.9 g; 36.0 mmol), dropwise over 2 minutes. Gas was evolved and the mixture warmed slightly. After stirring for 20 minutes, gas evolution had ceased, and argon gas was bubbled through the mixture for 2 minutes to try to remove the remaining trimethylsilane that had formed. A solution of 2-bromo-4-chloro-1-(2-nitrovinyl)benzene (1.18 g; 4.5 mmol) in 20 mL tetrahydrofuran was then added dropwise with stirring at ambient temperature over 4 minutes. The resulting mixture was stirred and heated to reflux. After 2 hours, the heat was removed, and after cooling to ambient temperature, the mixture was cooled in an ice bath and carefully quenched with 25 mL methanol. The solvent was evaporated, and the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane. The organic layer was dried over sodium sulfate and evaporated to give 0.92 g of 2-(2-bromo-4-chlorophenyl)ethanamine as a cloudy yellow oil. MS (apci, pos) m/z=234. the mixture warmed slightly argon gas was bubbled through the mixture for 2 minutes to remove the remaining trimethylsilane that had formed with stirring at ambient temperature over 4 minutes The resulting mixture was stirred heated to reflux After 2 hours the heat was removed the mixture was cooled in an ice bath carefully quenched with 25 mL methanol The solvent was evaporated the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane The organic layer was dried over sodium sulfate evaporated

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 4-(6-chloro-4-(ethoxycarbonyl)chroman-7-yloxy)benzoic acid (Preparation 1; 1.32 g; 3.52 mmol), 1-hydroxybenzotriazole hydrate (0.59 g; 3.85 mmol) and 2-(2-bromo-4-chlorophenyl)ethanamine (Preparation 5; 0.904 g; 3.85 mmol) in dry dimethylformamide (10 mL) was added 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride (0.806 g; 4.02 mmol) at ambient temperature. After stirring at ambient temperature for 5 hours, the solution was diluted with 100 mL of water, stirred for 10 minutes longer and then extracted with ethyl acetate (3×15 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by silica gel chromatography (Biotage 40M), eluting with hexane and ethyl acetate to provide ethyl 7-(4-(2-bromo-4-chlorophenethylcarbamoyl)phenoxy)-6-chlorochroman-4-carboxylate as a white solid (1.21 g). MS (apci, pos) m/z=594. stirred for 10 minutes longer extracted with ethyl acetate (3×15 mL) The combined organic layers were dried over sodium sulfate filtered concentrated in vacuo The residue was purified by silica gel chromatography (Biotage 40M) eluting with hexane and ethyl acetate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred suspension of lithium borohydride (0.39 g; 18.0 mmol) in 25 mL THF at ambient temperature was added chlorotrimethylsilane (3.9 g; 36.0 mmol), dropwise over 2 minutes. Gas was evolved and the mixture warmed slightly. After stirring for 20 minutes, gas evolution had ceased, and argon gas was bubbled through the mixture for 2 minutes to try to remove the remaining trimethylsilane that had formed. A solution of 2-bromo-4-chloro-1-(2-nitrovinyl)benzene (1.18 g; 4.5 mmol) in 20 mL tetrahydrofuan was then added dropwise with stirring at ambient temperature over 4 minutes. The resulting mixture was stirred and heated to reflux. After 2 hours, the heat was removed, and after cooling to ambient temperature, the mixture was cooled in an ice bath and carefully quenched with 25 mL methanol. The solvent was evaporated, and the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane. The organic layer was dried over sodium sulfate and evaporated to give 0.92 g of 2-(2-bromo-4-chlorophenyl)ethanamine as a cloudy yellow oil. MS (apci, pos) m/z=234. the mixture warmed slightly argon gas was bubbled through the mixture for 2 minutes to remove the remaining trimethylsilane that had formed with stirring at ambient temperature over 4 minutes The resulting mixture was stirred heated to reflux After 2 hours the heat was removed the mixture was cooled in an ice bath carefully quenched with 25 mL methanol The solvent was evaporated the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane The organic layer was dried over sodium sulfate evaporated

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 4-(6-chloro-4-(ethoxycarbonyl)chroman-7-yloxy)benzoic acid (Preparation 1; 1.32 g; 3.52 mmol), 1-hydroxybenzotriazole hydrate (0.59 g; 3.85 mmol) and 2-(2-bromo-4-chlorophenyl)ethanamine (Preparation 5; 0.904 g; 3.85 mmol) in dry dimethylformamide (10 mL) was added 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride (0.806 g; 4.02 mmol) at ambient temperature. After stirring at ambient temperature for 5 hours, the solution was diluted with 100 mL of water, stirred for 10 minutes longer and then extracted with ethyl acetate (3×15 mL). The combined organic layers were dried over sodium sulfate, filtered and concentrated in vacuo. The residue was purified by silica gel chromatography (Biotage 40M), eluting with hexane and ethyl acetate to provide ethyl 7-(4-(2-bromo-4-chlorophenethylcarbamoyl)phenoxy)-6-chlorochroman-4-carboxylate as a white solid (1.21 g). MS (apci, pos) m/z=594. stirred for 10 minutes longer extracted with ethyl acetate (3×15 mL) The combined organic layers were dried over sodium sulfate filtered concentrated in vacuo The residue was purified by silica gel chromatography (Biotage 40M) eluting with hexane and ethyl acetate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred suspension of lithium borohydride (0.39 g; 18.0 mmol) in 25 mL THF at ambient temperature was added chlorotrimethylsilane (3.9 g; 36.0 mmol), dropwise over 2 minutes. Gas was evolved and the mixture warmed slightly. After stirring for 20 minutes, gas evolution had ceased, and argon gas was bubbled through the mixture for 2 minutes to try to remove the remaining trimethylsilane that had formed. A solution of 2-bromo-4-chloro-1-(2-nitrovinyl)benzene (1.18 g; 4.5 mmol) in 20 mL tetrahydrofuran was then added dropwise with stirring at ambient temperature over 4 minutes. The resulting mixture was stirred and heated to reflux. After 2 hours, the heat was removed, and after cooling to ambient temperature, the mixture was cooled in an ice bath and carefully quenched with 25 mL methanol. The solvent was evaporated, and the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane. The organic layer was dried over sodium sulfate and evaporated to give 0.92 g of 2-(2-bromo-4-chlorophenyl)ethanamine as a cloudy yellow oil. MS (apci, pos) m/z=234. the mixture warmed slightly argon gas was bubbled through the mixture for 2 minutes to remove the remaining trimethylsilane that had formed with stirring at ambient temperature over 4 minutes The resulting mixture was stirred heated to reflux After 2 hours the heat was removed the mixture was cooled in an ice bath carefully quenched with 25 mL methanol The solvent was evaporated the residue was partitioned between 50 mL of 20% KOH and 25 mL of dichloromethane The organic layer was dried over sodium sulfate evaporated