ETHYL 4-BROMO-2-METHYL-2-(METHYLSULFONYL)BUTANOATE

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Cesium carbonate (2.01 g, 6.16 mmol) was added to a solution of the 5-fluoro-4-iodopyridin-2(1H)-one (491 mg, 2.06 mmol) and ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (767 mg, 2.67 mmol in THF (30 mL). The resulting suspension was heated to reflux and stirred at this temperature overnight. The reaction was filtered through celite (˜1 inch), and the filter pad was washed with ethyl acetate (2×30 ml). The combined filtrates were concentrated and the crude was purified via flash chromatography on an Analogix SF15-12 g column and an eluant of ethyl acetate in heptane (30-100%) to afford the title compound as a white gum (319 mg, 34.9%). LC-MS m/z 446.0 (M+1). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 1.35 (t, J=7.12 Hz, 3H) 1.75 (s, 3H) 2.40-2.58 (m, 2H) 3.10 (s, 3H) 3.87-3.99 (m, 1H) 4.16-4.25 (m, 1H) 4.29 (q, J=7.22 Hz, 2H) 7.15 (d, J=5.85 Hz, 1H) 7.20 (d, J=3.32 Hz, 1H). The resulting suspension was heated to reflux The reaction was filtered through celite (˜1 inch) the filter pad was washed with ethyl acetate (2×30 ml) The combined filtrates were concentrated the crude was purified via flash chromatography on an Analogix SF15-12 g column

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Cesium carbonate (1.50 g, 4.60 mmol) was added to a solution of 3-fluoro-4-iodopyridin-2(1H)-one (354 mg, 1.48 mmol) and ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (595 mg, 2.07 mmol in THF (25 mL). The resulting suspension was heated to 50° C. and stirred overnight. The reaction was heated to 70° C. and stirred at this temperature overnight. The reaction was filtered through celite (˜1 inch), and the filter pad was washed with ethyl acetate (2×30 ml). The combined filtrates were concentrated and the crude was purified via flash chromatography on an Analogix SF15-24 g column and an eluant of ethyl acetate in heptane (50-100%) to afford the title compounds as a clear gum (366 mg, 55.5%). LC-MS m/z 445.9 (M+1). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 1.35 (t, J=7.12 Hz, 3H) 1.76 (s, 3H) 2.43-2.56 (m, 2H) 3.11 (s, 3H) 3.97-4.10 (m, 1H) 4.20-4.38 (m, 3H) 6.50 (dd, 1H) 6.75-6.98 (m, 1H). The reaction was heated to 70° C. stirred at this temperature overnight The reaction was filtered through celite (˜1 inch) the filter pad was washed with ethyl acetate (2×30 ml) The combined filtrates were concentrated the crude was purified via flash chromatography on an Analogix SF15-24 g column

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (2.08 g, 7.25 mmol) and 4-iodo-3-methylpyridin-2(1H)-one (1.42 g, 6.04 mmol) in tetrahydrofuran (60.4 mL) was added cesium carbonate (4.06 g, 12.1) at ambient temperature. The resulting mixture was stirred at 50° C. overnight. The mixture was allowed to cool to ambient temperature and filtered through a celite pad. The pad was washed with ethyl acetate and the filtrate was concentrated to a crude residue. The material was purified via filtration through a silica gel pad, eluting with heptanes/ethyl acetate. The desired fractions were isolated, the solvent removed via rotary evaporation affording ethyl 4-(4-iodo-3-methyl-2-oxopyridin-1(2H)-yl)-2-methyl-2-(methylsulfonyl)butanoate as an oil. 1.97 g to cool to ambient temperature filtered through a celite pad The pad was washed with ethyl acetate the filtrate was concentrated to a crude residue The material was purified via filtration through a silica gel pad eluting with heptanes/ethyl acetate The desired fractions were isolated the solvent removed via rotary evaporation

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (2.08 g, 7.25 mmol) and 4-iodo-3-methylpyridin-2(1H)-one (1.42 g, 6.04 mmol) in tetrahydrofuran (60.4 mL) was added cesium carbonate (4.06 g, 12.1) at ambient temperature. The resulting mixture was stirred at 50° C. overnight. The mixture was allowed to cool to ambient temperature and filtered through a celite pad. The pad was washed with ethyl acetate and the filtrate was concentrated to a crude residue. The material was purified via filtration through a silica gel pad, eluting with heptanes/ethyl acetate. The desired fractions were isolated, the solvent removed via rotary evaporation affording ethyl 4-(4-iodo-3-methyl-2-oxopyridin-1(2H)-yl)-2-methyl-2-(methylsulfonyl)butanoate as an oil. 1.97 g to cool to ambient temperature filtered through a celite pad The pad was washed with ethyl acetate the filtrate was concentrated to a crude residue The material was purified via filtration through a silica gel pad eluting with heptanes/ethyl acetate The desired fractions were isolated the solvent removed via rotary evaporation

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (345 mg, 1.20 mmol) and 4-(benzyloxy)pyridin-2-ol (201 mg, 1.00 mmol) in tetrahydrofuran (10 mL) was added cesium carbonate (652 mg, 2.00) at ambient temperature. The resulting mixture was stirred at 50° C. overnight. The mixture was allowed to cool to ambient temperature and filtered through a celite pad. The pad was washed with ethyl acetate; the filtrates were combined and concentrated to a crude residue. The material was purified via filtration through a silica gel pad and eluted with heptanes/ethyl acetate. The desired fractions were isolated and the solvent removed via rotary evaporation affording ethyl 4-[4-(benzyloxy)-2-oxopyridin-1(2H)-yl]-2-methyl-2-(methylsulfonyl)butanoate as a white solid. 302.2 mg. 1H NMR (CD3OD) 7.47, (1H, d), 7.41-7.29 (5H, m), 6.15-6.13, (1H, dd), 5.96 (1H, d), 5.07 (2H, s), 4.20-4.12 (2H, m), 4.00-3.93 (1H, m), 3.47 (1H, q), 3.21 (3H, s), 2.60-2.53 (1H, m), 2.32-2.25 (1H, M), 3.20 (3H, s), 1.26 (3H, t) ppm. to cool to ambient temperature filtered through a celite pad The pad was washed with ethyl acetate concentrated to a crude residue The material was purified via filtration through a silica gel pad eluted with heptanes/ethyl acetate The desired fractions were isolated the solvent removed via rotary evaporation

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (345 mg, 1.20 mmol) and 4-(benzyloxy)pyridin-2-ol (201 mg, 1.00 mmol) in tetrahydrofuran (10 mL) was added cesium carbonate (652 mg, 2.00) at ambient temperature. The resulting mixture was stirred at 50° C. overnight. The mixture was allowed to cool to ambient temperature and filtered through a celite pad. The pad was washed with ethyl acetate; the filtrates were combined and concentrated to a crude residue. The material was purified via filtration through a silica gel pad and eluted with heptanes/ethyl acetate. The desired fractions were isolated and the solvent removed via rotary evaporation affording ethyl 4-[4-(benzyloxy)-2-oxopyridin-1(2H)-yl]-2-methyl-2-(methylsulfonyl)butanoate as a white solid. 302.2 mg. 1H NMR (CD3OD) 7.47, (1H, d), 7.41-7.29 (5H, m), 6.15-6.13, (1H, dd), 5.96 (1H, d), 5.07 (2H, s), 4.20-4.12 (2H, m), 4.00-3.93 (1H, m), 3.47 (1H, q), 3.21 (3H, s), 2.60-2.53 (1H, m), 2.32-2.25 (1H, M), 3.20 (3H, s), 1.26 (3H, t) ppm. to cool to ambient temperature filtered through a celite pad The pad was washed with ethyl acetate concentrated to a crude residue The material was purified via filtration through a silica gel pad eluted with heptanes/ethyl acetate The desired fractions were isolated the solvent removed via rotary evaporation

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (25.02 g, 87.1 mmol) was added to a mixture of 4-phenylpyridin-2-ol (12.40 g, 72.43 mmol) and cesium carbonate (49.70 g, 152.5 mmol) in THF (150 mL). The reaction was stirred and heated at 60° C. overnight. The reaction was diluted with ethyl acetate (200 mL) and water (200 mL); the organics were separated and the aqueous layer was extracted with ethyl acetate (2×150 mL). The combined organics were dried (MgSO4), filtered, and concentrated to afford a crude solid. The crude was purified via flash chromatography using an Analogix SF65-400 g column and eluted with ethyl acetate in heptane (30-80%) to afford the title compound as a white solid (16.79 g, 61.4%). LC-MS m/z 378.6 (M+1). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 1.31 (t, J=7.12 Hz, 3H) 1.58 (s, 2H) 2.41-2.62 (m, 2H) 3.09 (s, 3H) 3.90-4.01 (m, 1H) 4.20-4.32 (m, 3H) 6.40-6.45 (m, 1H) 6.73 (d, J=1.56 Hz, 1H) 7.31 (d, J=7.03 Hz, 1H) 7.37-7.46 (m, 2H) 7.50-7.55 (m, 2H). the organics were separated the aqueous layer was extracted with ethyl acetate (2×150 mL) The combined organics were dried (MgSO4) filtered concentrated to afford a crude solid The crude was purified via flash chromatography eluted with ethyl acetate in heptane (30-80%)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Sodium hydride (60% dispersion in mineral oil, 2.33 g, 58.3 mmol) was washed with hexane (2×10 mL) in a 100 mL two neck round bottom flask under nitrogen then suspended in DMF (30 mL). The suspension was treated dropwise with ethyl 2-(methylsulfonyl)propanoate (10.0 g, 55.49 mmol) in DMF (10 mL). The mixture was stirred 30 min at RT, cooled to 00° C., and treated dropwise with 1,2-dibromoethane (5.17 mL, 58.8). The mixture was allowed to warm to room temperature while stirring overnight. The mixture was quenched with saturated ammonium chloride (100 mL) and the mixture was extracted with diethyl ether (4×50 mL). Combined organics were washed with 50% saturated sodium chloride (4×50 mL), dried (MgSO4), filtered and the filtrate concentrated in vacuo. Crude material was chromatographed over silica gel (350 g, 230-400 mesh) eluting with 10-20% EtOAc/hexane to afford the title compound as a pale yellow oil (7.9 g, 50%). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 1.33 (t, J=7.05 Hz, 3H) 1.64 (s, 3H) 2.49-2.59 (m, 1H) 2.78 (ddd, J=13.89, 10.16, 6.64 Hz, 1H) 3.05 (s, 3H) 3.33-3.41 (m, 1H) 3.46-3.54 (m, 1H) 4.22-4.37 (m, 2H). cooled to 00° C to warm to room temperature while stirring overnight The mixture was quenched with saturated ammonium chloride (100 mL) the mixture was extracted with diethyl ether (4×50 mL) Combined organics were washed with 50% saturated sodium chloride (4×50 mL) dried (MgSO4) filtered the filtrate concentrated in vacuo Crude material was chromatographed over silica gel (350 g, 230-400 mesh) eluting with 10-20% EtOAc/hexane

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Sodium hydride (60% dispersion in mineral oil, 2.33 g, 58.3 mmol) was washed with hexane (2×10 mL) in a 100 mL two neck round bottom flask under nitrogen then suspended in DMF (30 mL). The suspension was treated dropwise with ethyl 2-(methylsulfonyl)propanoate (10.0 g, 55.49 mmol) in DMF (10 mL). The mixture was stirred 30 min at RT, cooled to 00° C., and treated dropwise with 1,2-dibromoethane (5.17 mL, 58.8). The mixture was allowed to warm to room temperature while stirring overnight. The mixture was quenched with saturated ammonium chloride (100 mL) and the mixture was extracted with diethyl ether (4×50 mL). Combined organics were washed with 50% saturated sodium chloride (4×50 mL), dried (MgSO4), filtered and the filtrate concentrated in vacuo. Crude material was chromatographed over silica gel (350 g, 230-400 mesh) eluting with 10-20% EtOAc/hexane to afford the title compound as a pale yellow oil (7.9 g, 50%). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 1.33 (t, J=7.05 Hz, 3H) 1.64 (s, 3H) 2.49-2.59 (m, 1H) 2.78 (ddd, J=13.89, 10.16, 6.64 Hz, 1H) 3.05 (s, 3H) 3.33-3.41 (m, 1H) 3.46-3.54 (m, 1H) 4.22-4.37 (m, 2H). cooled to 00° C to warm to room temperature while stirring overnight The mixture was quenched with saturated ammonium chloride (100 mL) the mixture was extracted with diethyl ether (4×50 mL) Combined organics were washed with 50% saturated sodium chloride (4×50 mL) dried (MgSO4) filtered the filtrate concentrated in vacuo Crude material was chromatographed over silica gel (350 g, 230-400 mesh) eluting with 10-20% EtOAc/hexane

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Sodium hydride (60% dispersion in mineral oil, 2.33 g, 58.3 mmol) was washed with hexanes (2×10 mL) in a 100 mL two neck round bottom flask under nitrogen then suspended in DMF (30 mL). The suspension was treated dropwise with ethyl 2-(methylsulfonyl)propanoate (10.0 g, 55.49 mmol) in DMF (10 mL). The mixture was stirred 30 min at RT, cooled to 0° C., and treated drop-wise with 1,2-dibromoethane (5.17 mL, 58.8). The mixture was allowed to warm to room temperature while stirring overnight. The mixture was quenched with saturated aq ammonium chloride (100 mL) and extracted with diethyl ether (4×50 mL). Combined organics were washed with 50% saturated sodium chloride (4×50 mL), dried (MgSO4), and concentrated in vacuo. Crude material was purified via silica chromatography (350 g, 230-400 mesh) and an eluent of EtOAc in hexanes (10-20%) to afford the title compound as a pale yellow oil (7.9 g, 50%). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 1.33 (t, J=7.05 Hz, 3H) 1.64 (s, 3H) 2.49-2.59 (m, 1H) 2.78 (ddd, J=13.89, 10.16, 6.64 Hz, 1H) 3.05 (s, 3H) 3.33-3.41 (m, 1H) 3.46-3.54 (m, 1H) 4.22-4.37 (m, 2H). cooled to 0° C. to warm to room temperature while stirring overnight The mixture was quenched with saturated aq ammonium chloride (100 mL) extracted with diethyl ether (4×50 mL) Combined organics were washed with 50% saturated sodium chloride (4×50 mL) dried (MgSO4) concentrated in vacuo Crude material was purified via silica chromatography (350 g, 230-400 mesh)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Sodium hydride (60% dispersion in mineral oil, 2.33 g, 58.3 mmol) was washed with hexane (2×10 mL) in a 100 mL two neck round bottom flask under nitrogen and then suspended in DMF (30 mL). The suspension was treated dropwise with ethyl 2-(methylsulfonyl)propanoate (10.0 g, 55.49 mmol) in DMF (10 mL). The mixture was stirred for 30 min at RT, cooled to 0° C., and treated dropwise with 1,2-dibromoethane (5.17 mL, 58.8 mmol). The mixture was allowed to warm to room temperature while stirring overnight. The mixture was quenched with saturated ammonium chloride (100 mL) and then extracted with diethyl ether (4×50 mL). The combined organic layers were washed with 50% saturated sodium chloride (4×50 mL), dried (MgSO4), filtered and the filtrate concentrated in vacuo. The crude material was chromatographed over silica gel (350 g, 230-400 mesh) eluting with 10-20% EtOAc/hexane to afford the title compound as a pale yellow oil (7.9 g, 50%). 1H NMR (400 MHz, CHLOROFORM-d) δ 1.33 (t, J=7.05 Hz, 3H) 1.64 (s, 3H) 2.49-2.59 (m, 1H) 2.78 (ddd, J=13.89, 10.16, 6.64 Hz, 1H) 3.05 (s, 3H) 3.33-3.41 (m, 1H) 3.46-3.54 (m, 1H) 4.22-4.37 (m, 2H). cooled to 0° C. to warm to room temperature while stirring overnight The mixture was quenched with saturated ammonium chloride (100 mL) extracted with diethyl ether (4×50 mL) The combined organic layers were washed with 50% saturated sodium chloride (4×50 mL) dried (MgSO4) filtered the filtrate concentrated in vacuo The crude material was chromatographed over silica gel (350 g, 230-400 mesh) eluting with 10-20% EtOAc/hexane

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Cesium carbonate (2.01 g, 6.16 mmol) was added to a solution of the 5-fluoro-4-iodopyridin-2(1H)-one (491 mg, 2.06 mmol) and ethyl 4-bromo-2-methyl-2-(methylsulfonyl)butanoate (767 mg, 2.67 mmol in THF (30 mL). The resulting suspension was heated to reflux and stirred at this temperature overnight. The reaction was filtered through celite (−1 inch), and the filter pad was washed with ethyl acetate (2×30 ml). The combined filtrates were concentrated and the crude was purified via flash chromatography on an Analogix SF15-12g column and an eluant of ethyl acetate in heptane (30-100%) to afford the title compound as a white gum (319 mg, 34.9%). LC-MS m/z 446.0 (M+1). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 1.35 (t, J=7.12 Hz, 3 H) 1.75 (s, 3 H) 2.40-2.58 (m, 2 H) 3.10 (s, 3 H) 3.87-3.99 (m, 1 H) 4.16-4.25 (m, 1H) 4.29 (q, J=7.22 Hz, 2 H) 7.15 (d, J=5.85 Hz, 1 H) 7.20 (d, J=3.32 Hz, 1 H). The resulting suspension was heated to reflux The reaction was filtered through celite (−1 inch) the filter pad was washed with ethyl acetate (2×30 ml) The combined filtrates were concentrated the crude was purified via flash chromatography on an Analogix SF15-12g column