甲基2,2,2-碳酸三氟乙酯

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column

反应条件: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a flask (3-liter volume) equipped with 10 distillation columns, 2,2,2-trifluoroethanol (790 g, 7.9 ml), dimethyl carbonate (2140 g, 23.7 mol) and a 28% sodium methoxide/methanol solution (15.3 g) were charged. The flask was heated to 100° C. to allow the starting materials to react for 30 hours while removing the methanol from the distillation columns by evaporation. After allowing the mixture to cool to room temperature, an aqueous solution of ammonium chloride was added to the mixture and the mixture was shaken to remove the sodium methoxide. The organic layer was washed with water, dried and distilled to give methyl 2,2,2-trifluoroethyl carbonate as a colorless liquid (410 g, yield 33%). The chemical structure of the produced compound was determined based on the IR and NMR absorbance spectra shown in FIG. 3 and FIG. 4 respectively and the mass spectrometry spectrum (M/e=158). to react for 30 hours while removing the methanol from the distillation columns by evaporation to cool to room temperature an aqueous solution of ammonium chloride was added to the mixture to remove the sodium methoxide The organic layer was washed with water dried distilled

反应条件: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a flask (3-liter volume) equipped with 10 distillation columns, 2,2,2-trifluoroethanol (790 g, 7.9 ml), dimethyl carbonate (2140 g, 23.7 mol) and a 28% sodium methoxide/methanol solution (15.3 g) were charged. The flask was heated to 100° C. to allow the starting materials to react for 30 hours while removing the methanol from the distillation columns by evaporation. After allowing the mixture to cool to room temperature, an aqueous solution of ammonium chloride was added to the mixture and the mixture was shaken to remove the sodium methoxide. The organic layer was washed with water, dried and distilled to give methyl 2,2,2-trifluoroethyl carbonate as a colorless liquid (410 g, yield 33%). The chemical structure of the produced compound was determined based on the IR and NMR absorbance spectra shown in FIG. 3 and FIG. 4 respectively and the mass spectrometry spectrum (M/e=158). to react for 30 hours while removing the methanol from the distillation columns by evaporation to cool to room temperature an aqueous solution of ammonium chloride was added to the mixture to remove the sodium methoxide The organic layer was washed with water dried distilled

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2,2,2-trifluoroethanol (105 g 1.05 mol), pyridine (87 g 1.1 mol) and 300 mL of methylene chloride were combined in a 1 L 3-neck round bottom flask. The flask was equipped with an overhead stirring mechanism, thermocouple, addition funnel, cold water condenser, and a dry nitrogen bubbler. The reaction flask was kept cool using a dry ice/acetone bath to keep the temperature in the range of −20° C. to −15° C. Methylchloroformate (100 g 1.05 mol) was added via an addition funnel at such a rate that the temperature was kept in the range of −20° C. to −15° C. Once the addition of the methylchloroformate was complete the reaction mix was allowed to warm to room temperature. The reaction mix was then quenched with 100 mL water. The methylene chloride solution was separated from the water and washed with 2×100 mL of 1N HCl. The methylene chloride was removed by distillation and the product was purified using fractional distillation on a concentric tube column (b.p.=90.0° C., purity=99.7%). The structure mass was confirmed by GC/MS. The flask was equipped with an overhead thermocouple, addition funnel, cold water condenser The reaction flask was kept cool in the range of −20° C. to −15° C was kept in the range of −20° C. to −15° C mix The reaction mix was then quenched with 100 mL water The methylene chloride solution was separated from the water washed with 2×100 mL of 1N HCl The methylene chloride was removed by distillation the product was purified distillation on a concentric tube column (b.p.=90.0° C., purity=99.7%)

反应条件: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a flask (3-liter volume) equipped with 10 distillation columns, 2,2,2-trifluoroethanol (790 g, 7.9 ml), dimethyl carbonate (2140 g, 23.7 mol) and a 28% sodium methoxide/methanol solution (15.3 g) were charged. The flask was heated to 100° C. to allow the starting materials to react for 30 hours while removing the methanol from the distillation columns by evaporation. After allowing the mixture to cool to room temperature, an aqueous solution of ammonium chloride was added to the mixture and the mixture was shaken to remove the sodium methoxide. The organic layer was washed with water, dried and distilled to give methyl 2,2,2-trifluoroethyl carbonate as a colorless liquid (410 g, yield 33%). The chemical structure of the produced compound was determined based on the IR and NMR absorbance spectra shown in FIG. 3 and FIG. 4 respectively and the mass spectrometry spectrum (M/e=158). to react for 30 hours while removing the methanol from the distillation columns by evaporation to cool to room temperature an aqueous solution of ammonium chloride was added to the mixture to remove the sodium methoxide The organic layer was washed with water dried distilled

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a dry box, methyl chloroformate (219 mL, 268 g, 2.84 mol) was added slowly to a solution containing 2,2,2-trifluoroethanol (233.5 g, 2.335 mol), pyridine (225 g), and dichloromethane (1.2 L, anhydrous) at −10° C. to 30° C. (the dichloromethane was cooled in a freezer before use), with magnetic stirring. The reaction mixture was stirred at room temperature in the dry box overnight. The reaction mixture was then taken out of the dry box, and was washed with 5% HCl (300 mL), followed by 3 washes with 50 mL portions of 5% HCl, one wash with 5% sodium carbonate (100 mL), and 2 washes with 100 mL portions of brine. The organic phase was then dried over anhydrous sodium sulfate. Dichloromethane was removed by rotary evaporation. The residue liquid was distilled with a spinner band column, yielding 185.4 g (46% yield) of pure methyl 2,2,2-trifluoroethyl carbonate, also referred to herein as “FS-D”. NMR analysis data were consistent with literature values (U.S. Pat. No. 5,659,062). was cooled in a freezer before use), with magnetic stirring was washed with 5% HCl (300 mL) wash with 5% sodium carbonate (100 mL), and 2 The organic phase was then dried over anhydrous sodium sulfate Dichloromethane was removed by rotary evaporation The residue liquid was distilled with a spinner band column