2-氟-4-甲氧基苯酚

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A three-neck RBF equipped with a reflux condenser and overhead stirrer was charged with 2-fluoro-4-methoxyphenol (14.24 g, 100 mmol), 2,5-dibromobenzoic acid (25.5 g, 91 mmol), EtOAc (0.446 mL, 4.55 mmol), copper (I) triflate toluene complex (2:1) (0.484 g, 2.27 mmol) and toluene (300 mL). Cesium carbonate (59.4 g, 182 mmol) was carefully added portion-wise. The mixture was stirred for 10 minutes at RT then heated at 95° C. for 3 hours. The toluene was cooled to RT then extracted twice with 300 ml of water. The combined water extracts were acidified with 6 N HCl at which time a precipitate formed. The mixture was extracted with EtOAc (3×500 mL) and the combined organic fractions were dried over sodium sulfate and concentrated in vacuo. The resulting solid was triturated with minimal 1:1 Hexanes:EtOAc and filtered. The collected solid was dried in vacuo to afford 5-bromo-2-(2-fluoro-4-methoxyphenoxy)benzoic acid as a grey solid. The mother liquors were set aside for later recrystallizatio. MS m/z=341.0 [M+H]. A three-neck RBF equipped with a reflux condenser and overhead stirrer then heated at 95° C. for 3 hours then extracted twice with 300 ml of water formed The mixture was extracted with EtOAc (3×500 mL) the combined organic fractions were dried over sodium sulfate concentrated in vacuo The resulting solid was triturated with minimal 1:1 Hexanes EtOAc and filtered The collected solid was dried in vacuo

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 2 L RB flask was charged with 2-fluoro-4-methoxyphenol (49.6 g, 349 mmol), 2,5-dibromo-4-fluorobenzoic acid (80 g, 269 mmol), ethyl acetate (1.316 mL, 13.43 mmol), cesium carbonate (192 g, 591 mmol) and toluene (1200 mL). To the mixture at was added copper(I) triflate toluene complex (2:1) (1.713 g, 8.06 mmol) and it was stirred at room temperature for 20 minutes. The solution was then heated to 75° C. for 16 hours at which point the toluene was removed under reduced pressure. The solution was dissolved in 1.5 liters of water and washed with 250 ml of EtOAc. The aqeuous layer was acidified to pH 1 with concentrated HCl and the resulting precipitant was collected by filtration and washed with water. The derived solid was washed with a 1:1 solution of ethyl acetate and hexane, then dried under vacuum to afford 5-bromo-4-fluoro-2-(2-fluoro-4-methoxyphenoxy)benzoic acid as a light brown solid. MS m/z=358.8 [M+H]. To the mixture at was added copper(I) triflate toluene complex (2:1) (1.713 g, 8.06 mmol) and it was removed under reduced pressure The solution was dissolved in 1.5 liters of water washed with 250 ml of EtOAc the resulting precipitant was collected by filtration washed with water The derived solid was washed with a 1:1 solution of ethyl acetate and hexane dried under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The title compound was prepared by reacting 2-fluoro-4-methoxy-phenol (2.8 g, 19.7 mmol) with trifluoromethanesulfonic anhydride (4.31 mL, 7.23 g, 25.6 mmol) according to method B to yield 3.86 g (68%) of a clear yellow oil. 1H NMR (DMSO-d6): δ 3.82 (3H, s), 6.89-6.94 (1H, m), 7.24 (1H, dd, J=12.49 Hz, J=2.98 Hz), 7.61 (1H, t, J=9.09 Hz).

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of 2-fluoro-4-methyl acetophenone (10.0 g, 0.059 mol), mCPBA (26.0 g, 0.128 mol) and MgSO4 (30.0 g) in 500 mL of CHCl3 was stirred for 12 hrs. at RT. The mixture was then filtrated, washed with 2M NaOH, dried over Na2SO4 and concentrated in vacuo to give 1-acetyl-2-fluoro-4-methoxybenzene as a solid (10.7 g, 98%). A solution of the 1-acetyl-2-fluoro-4-methoxybenzene (5.3 g, 0.029 mol) in 100 mL of MeOH and 20 mL of 25% NH3 (aq) was stirred for 1 hr. at RT. The mixture was then concentrated in vacuo, diluted with water, extracted with EtOAc, dried over Na2SO4 and concentrated in vacuo to give 2-fluoro-4-methoxyphenol as an oil (3.85 g, 94%). 2-Ethoxy-1-fluoro-4-methoxybenzaldehyde was prepared according to method described in Example 362 of WO 93/03022 and converted to a cis/trans mixture of 2-(2-ethoxy-1-fluoro-6-methoxyphenyl) cyclopropylisocyanates according to the methods described in Examples 375 and 348 of WO 93/03022. This product was then condensed with 2-amino-5-bromo-pyridine in a manner analogous to the method in Example 7 to provide cis/trans mixture of N-2-(2-ethoxy-1-fluoro-6-methoxyphenyl)cyclopropyl-N′-(5-bromopyrid-2-yl)-ureas. The two products were separated on a silica-gel column eluated with mixtures of hexane and ethylacetate to yield N-(cis)-(3-ethoxy-2-fluoro-6-methoxyphenyl)-cyclopropyl-N′-(5-bromopyrid-2-yl)-urea: 1H NMR (250 MHz, CDCl3) δ 7.88 (s, 1H), 7.55 (dd, 1H), 6.83 (t, 1H),6.58 (dd, 1H), 4.03 (q, 2H), 3.79 (s, 3H), 3.32-3.19 (m, 1H), 1.54-1.20 (m, 2H), 1.46 (t, 3H). at RT The mixture was then concentrated in vacuo diluted with water extracted with EtOAc dried over Na2SO4 concentrated in vacuo

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of 2-fluoro-4-methyl acetophenone (10.0 g, 0.059 mol), mCPBA (26.0 g, 0.128 mol) and MgSO4 (30.0 g) in 500 mL of CHCl3 was stirred for 12 hrs. at RT. The mixture was then filtrated, washed with 2M NaOH, dried over Na2SO4 and concentrated in vacuo to give 1-acetyl-2-fluoro-4-methoxybenzene as a solid (10.7 g, 98%). A solution of the 1-acetyl-2-fluoro-4-methoxybenzene (5.3 g, 0.029 mol) in 100 mL of MeOH and 20 mL of 25% NH3 (aq) was stirred for 1 hr. at RT. The mixture was then concentrated in vacuo, diluted with water, extracted with EtOAc, dried over Na2SO4 and concentrated in vacuo to give 2-fluoro-4-methoxyphenol as an oil (3.85 g, 94%). 2-Ethoxy-1-fluoro-4-methoxybenzaldehyde was prepared according to method described in Example 362 of WO 93/03022 and converted to a cis/trans mixture of 2-(2-ethoxy-1-fluoro-6-methoxyphenyl) cyclopropylisocyanates according to the methods described in Examples 375 and 348 of WO 93/03022. This product was then condensed with 2-amino-5-bromo-pyridine in a manner analogous to the method in Example 7 to provide cis/trans mixture of N-2-(2-ethoxy-1-fluoro-6-methoxyphenyl)cyclopropyl-N′-(5-bromopyrid-2-yl)-ureas. The two products were separated on a silica-gel column eluated with mixtures of hexane and ethylacetate to yield N-(cis)-(3-ethoxy-2-fluoro-6-methoxyphenyl)-cyclopropyl-N′-(5-bromopyrid-2-yl)-urea: 1H NMR (250 MHz, CDCl3) δ 7.88 (s, 1H), 7.55 (dd, 1H), 6.83 (t, 1H),6.58 (dd, 1H), 4.03 (q, 2H), 3.79 (s, 3H), 3.32-3.19 (m, 1H), 1.54-1.20 (m, 2H), 1.46 (t, 3H). at RT The mixture was then concentrated in vacuo diluted with water extracted with EtOAc dried over Na2SO4 concentrated in vacuo

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of tert-butyl 4-hydroxypiperidine-1-carboxylate (2.496 g, 12.03 mmol) in THF (33.4 mL) at room temperature was treated with 2-fluoro-4-methoxyphenol (1.181 mL, 10.03 mmol) and triphenylphosphine (3.16 g, 12.03 mmol). The reaction mixture was cooled to 0° C. and DEAD (40 wt % in toluene, 5.95 mL, 15.04 mmol) was added dropwise via syringe. The resulting reaction mixture was stirred at 65° C. for 5 h, then at room temperature overnight. Flash silica gel chromatography using a gradient of 10% to 100% EtOAc in hexanes gave tert-butyl 4-(2-fluoro-4-methoxyphenoxy)piperidine-1-carboxylate (2.78 g, 85%) as a light yellow oil. ESI-MS m/z [M+Na]+ 348.2. The resulting reaction mixture at room temperature overnight

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of tert-butyl 4-hydroxypiperidine-1-carboxylate (2.496 g, 12.03 mmol) in THF (33.4 mL) at room temperature was treated with 2-fluoro-4-methoxyphenol (1.181 mL, 10.03 mmol) and triphenylphosphine (3.16 g, 12.03 mmol). The reaction mixture was cooled to 0° C. and DEAD (40 wt % in toluene, 5.95 mL, 15.04 mmol) was added dropwise via syringe. The resulting reaction mixture was stirred at 65° C. for 5 h, then at room temperature overnight. Flash silica gel chromatography using a gradient of 10% to 100% EtOAc in hexanes gave tert-butyl 4-(2-fluoro-4-methoxyphenoxy)piperidine-1-carboxylate (2.78 g, 85%) as a light yellow oil. ESI-MS m/z [M+Na]+ 348.2. The resulting reaction mixture at room temperature overnight

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A three-neck RBF equipped with a reflux condenser and overhead stirrer was charged with 2-fluoro-4-methoxyphenol (14.24 g, 100 mmol), 2,5-dibromobenzoic acid (25.5 g, 91 mmol), EtOAc (0.446 mL, 4.55 mmol), copper (I) triflate toluene complex (2:1) (0.484 g, 2.27 mmol) and toluene (300 mL). Cesium carbonate (59.4 g, 182 mmol) was carefully added portion-wise. The mixture was stirred for 10 minutes at RT then heated at 95° C. for 3 hours. The toluene was cooled to RT then extracted twice with 300 ml of water. The combined water extracts were acidified with 6 N HCl at which time a precipitate formed. The mixture was extracted with EtOAc (3×500 mL) and the combined organic fractions were dried over sodium sulfate and concentrated in vacuo. The resulting solid was triturated with minimal 1:1 Hexanes:EtOAc and filtered. The collected solid was dried in vacuo to afford 5-bromo-2-(2-fluoro-4-methoxyphenoxy)benzoic acid as a grey solid. The mother liquors were set aside for later recrystallizatio. MS m/z=341.0 [M+H]. A three-neck RBF equipped with a reflux condenser and overhead stirrer then heated at 95° C. for 3 hours then extracted twice with 300 ml of water formed The mixture was extracted with EtOAc (3×500 mL) the combined organic fractions were dried over sodium sulfate concentrated in vacuo The resulting solid was triturated with minimal 1:1 Hexanes EtOAc and filtered The collected solid was dried in vacuo

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 2 L RB flask was charged with 2-fluoro-4-methoxyphenol (49.6 g, 349 mmol), 2,5-dibromo-4-fluorobenzoic acid (80 g, 269 mmol), ethyl acetate (1.316 mL, 13.43 mmol), cesium carbonate (192 g, 591 mmol) and toluene (1200 mL). To the mixture at was added copper(I) triflate toluene complex (2:1) (1.713 g, 8.06 mmol) and it was stirred at room temperature for 20 minutes. The solution was then heated to 75° C. for 16 hours at which point the toluene was removed under reduced pressure. The solution was dissolved in 1.5 liters of water and washed with 250 ml of EtOAc. The aqeuous layer was acidified to pH 1 with concentrated HCl and the resulting precipitant was collected by filtration and washed with water. The derived solid was washed with a 1:1 solution of ethyl acetate and hexane, then dried under vacuum to afford 5-bromo-4-fluoro-2-(2-fluoro-4-methoxyphenoxy)benzoic acid as a light brown solid. MS m/z=358.8 [M+H]. To the mixture at was added copper(I) triflate toluene complex (2:1) (1.713 g, 8.06 mmol) and it was removed under reduced pressure The solution was dissolved in 1.5 liters of water washed with 250 ml of EtOAc the resulting precipitant was collected by filtration washed with water The derived solid was washed with a 1:1 solution of ethyl acetate and hexane dried under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 2 L RB flask was charged with 2-fluoro-4-methoxyphenol (49.6 g, 349 mmol), 2,5-dibromo-4-fluorobenzoic acid (80 g, 269 mmol), ethyl acetate (1.316 mL, 13.43 mmol), cesium carbonate (192 g, 591 mmol) and toluene (1200 mL). To the mixture at was added copper(I) triflate toluene complex (2:1) (1.713 g, 8.06 mmol) and it was stirred at room temperature for 20 minutes. The solution was then heated to 75° C. for 16 hours at which point the toluene was removed under reduced pressure. The solution was dissolved in 1.5 liters of water and washed with 250 ml of EtOAc. The aqeuous layer was acidified to pH 1 with concentrated HCl and the resulting precipitant was collected by filtration and washed with water. The derived solid was washed with a 1:1 solution of ethyl acetate and hexane, then dried under vacuum to afford 5-bromo-4-fluoro-2-(2-fluoro-4-methoxyphenoxy)benzoic acid as a light brown solid. MS m/z=358.8 [M+H]. To the mixture at was added copper(I) triflate toluene complex (2:1) (1.713 g, 8.06 mmol) and it was removed under reduced pressure The solution was dissolved in 1.5 liters of water washed with 250 ml of EtOAc the resulting precipitant was collected by filtration washed with water The derived solid was washed with a 1:1 solution of ethyl acetate and hexane dried under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Synthesis followed SP3a, using 3.5 mmol 2-fluoro-4-methoxyphenol and racemic epibromohydrine to give the title compound upon purification by Flash Master Personal (20 g silica gel cartridge, PE to PE/ethyl acetate 5:1) with 48% yield. Synthesis

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Synthesis followed SP3a, using 3.5 mmol 2-fluoro-4-methoxyphenol and racemic epibromohydrine to give the title compound upon purification by Flash Master Personal (20 g silica gel cartridge, PE to PE/ethyl acetate 5:1) with 48% yield. Synthesis