三乙二醇二丙烯酸酯

反应条件: temp:75.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The process of obtaining the resin emulsion (styrene-acrylic acid) was as follows. A reactor having a stirrer, a reflux condenser, a dripping device, and a thermometer was loaded with 800 g of ion-exchanged water and 1 g of sodium lauryl sulfate, and the reactor was heated to 75° C. under stirring while nitrogen was introduced. Six (6) grams of potassium persulfate, a polymerization initiator, was added and dissolved with the internal temperature maintained at 75° C. An emulsion was prepared beforehand by combining 450 g of ion-exchanged water and 2 g of sodium lauryl sulfate with 20 g of acrylamide, 600 g of methyl methacrylate, 215 g of butyl acrylate, 30 g of methacrylic acid, and 5 g of triethylene glycol diacrylate under stirring, and this emulsion was continuously added dropwise to the reaction solution over 5 hours. The obtained mixture was incubated for 3 hours. After the resulting aqueous emulsion had cooled to room temperature, ion-exchanged water and sodium hydroxide solution were added until the solid content was 30% by mass and the pH was 8. The resin emulsion (styrene-acrylic acid) was obtained in this way. A reactor having was introduced dissolved with the internal temperature maintained at 75° C An emulsion was prepared under stirring this emulsion was continuously added dropwise to the reaction solution over 5 hours After the resulting aqueous emulsion had cooled to room temperature

反应条件: temp:75.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The process of obtaining the resin emulsion (styrene-acrylic acid) was as follows. A reactor having a stirrer, a reflux condenser, a dripping device, and a thermometer was loaded with 800 g of ion-exchanged water and 1 g of sodium lauryl sulfate, and the reactor was heated to 75° C. under stirring while nitrogen was introduced. Six (6) grams of potassium persulfate, a polymerization initiator, was added and dissolved with the internal temperature maintained at 75° C. An emulsion was prepared beforehand by combining 450 g of ion-exchanged water and 2 g of sodium lauryl sulfate with 20 g of acrylamide, 600 g of methyl methacrylate, 215 g of butyl acrylate, 30 g of methacrylic acid, and 5 g of triethylene glycol diacrylate under stirring, and this emulsion was continuously added dropwise to the reaction solution over 5 hours. The obtained mixture was incubated for 3 hours. After the resulting aqueous emulsion had cooled to room temperature, ion-exchanged water and sodium hydroxide solution were added until the solid content was 30% by mass and the pH was 8. The resin emulsion (styrene-acrylic acid) was obtained in this way. A reactor having was introduced dissolved with the internal temperature maintained at 75° C An emulsion was prepared under stirring this emulsion was continuously added dropwise to the reaction solution over 5 hours After the resulting aqueous emulsion had cooled to room temperature

反应条件: temp:75.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A typical process for obtaining the resin emulsion (styrene-acrylic acid) is as follows. A reactor having a stirrer, a reflux condenser, a dripping device, and a thermometer is loaded with 800 g of ion-exchanged water and 1 g of sodium lauryl sulfate, and the reactor is heated to 75° C. under stirring while nitrogen is introduced. Six (6) grams of potassium persulfate, a polymerization initiator, is added and dissolved with the internal temperature maintained at 75° C. An emulsion is prepared beforehand by combining 450 g of ion-exchanged water and 2 g of sodium lauryl sulfate with 20 g of acrylamide, 600 g of methyl methacrylate, 215 g of butyl acrylate, 30 g of methacrylic acid, and 5 g of triethylene glycol diacrylate under stirring, and this emulsion is continuously added dropwise to the reaction solution over 5 hours. The obtained mixture is incubated for 3 hours. After the resulting aqueous emulsion has cooled to room temperature, ion-exchanged water and sodium hydroxide solution are added until the solid content is 30% by mass and the pH is 8. The resin emulsion (styrene-acrylic acid) is obtained in this way. A reactor having is introduced dissolved with the internal temperature maintained at 75° C An emulsion is prepared under stirring this emulsion is continuously added dropwise to the reaction solution over 5 hours After the resulting aqueous emulsion has cooled to room temperature

反应条件: temp:75.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The process of obtaining the resin emulsion (styrene-acrylic acid) was as follows. A reactor having a stirrer, a reflux condenser, a dripping device, and a thermometer was loaded with 800 g of ion-exchanged water and 1 g of sodium lauryl sulfate, and the reactor was heated to 75° C. under stirring while nitrogen was introduced. Six (6) grams of potassium persulfate, a polymerization initiator, was added and dissolved with the internal temperature maintained at 75° C. An emulsion was prepared beforehand by combining 450 g of ion-exchanged water and 2 g of sodium lauryl sulfate with 20 g of acrylamide, 600 g of methyl methacrylate, 215 g of butyl acrylate, 30 g of methacrylic acid, and 5 g of triethylene glycol diacrylate under stirring, and this emulsion was continuously added dropwise to the reaction solution over 5 hours. The obtained mixture was incubated for 3 hours. After the resulting aqueous emulsion had cooled to room temperature, ion-exchanged water and sodium hydroxide solution were added until the solid content was 30% by mass and the pH was 8. The resin emulsion (styrene-acrylic acid) was obtained in this way. A reactor having was introduced dissolved with the internal temperature maintained at 75° C An emulsion was prepared under stirring this emulsion was continuously added dropwise to the reaction solution over 5 hours After the resulting aqueous emulsion had cooled to room temperature

反应条件: temp:75.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The process of obtaining the resin emulsion (styrene-acrylic acid) was as follows. A reactor having a stirrer, a reflux condenser, a dripping device, and a thermometer was loaded with 800 g of ion-exchanged water and 1 g of sodium lauryl sulfate, and the reactor was heated to 75° C. under stirring while nitrogen was introduced. Six (6) grams of potassium persulfate, a polymerization initiator, was added and dissolved with the internal temperature maintained at 75° C. An emulsion was prepared beforehand by combining 450 g of ion-exchanged water and 2 g of sodium lauryl sulfate with 20 g of acrylamide, 600 g of methyl methacrylate, 215 g of butyl acrylate, 30 g of methacrylic acid, and 5 g of triethylene glycol diacrylate under stirring, and this emulsion was continuously added dropwise to the reaction solution over 5 hours. The obtained mixture was incubated for 3 hours. After the resulting aqueous emulsion had cooled to room temperature, ion-exchanged water and sodium hydroxide solution were added until the solid content was 30% by mass and the pH was 8. The resin emulsion (styrene-acrylic acid) was obtained in this way. A reactor having was introduced dissolved with the internal temperature maintained at 75° C An emulsion was prepared under stirring this emulsion was continuously added dropwise to the reaction solution over 5 hours After the resulting aqueous emulsion had cooled to room temperature

反应条件: temp:75.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A typical process for obtaining the resin emulsion (styrene-acrylic acid) is as follows. A reactor having a stirrer, a reflux condenser, a dripping device, and a thermometer is loaded with 800 g of ion-exchanged water and 1 g of sodium lauryl sulfate, and the reactor is heated to 75° C. under stirring while nitrogen is introduced. Six (6) grams of potassium persulfate, a polymerization initiator, is added and dissolved with the internal temperature maintained at 75° C. An emulsion is prepared beforehand by combining 450 g of ion-exchanged water and 2 g of sodium lauryl sulfate with 20 g of acrylamide, 600 g of methyl methacrylate, 215 g of butyl acrylate, 30 g of methacrylic acid, and 5 g of triethylene glycol diacrylate under stirring, and this emulsion is continuously added dropwise to the reaction solution over 5 hours. The obtained mixture is incubated for 3 hours. After the resulting aqueous emulsion has cooled to room temperature, ion-exchanged water and sodium hydroxide solution are added until the solid content is 30% by mass and the pH is 8. The resin emulsion (styrene-acrylic acid) is obtained in this way. A reactor having is introduced dissolved with the internal temperature maintained at 75° C An emulsion is prepared under stirring this emulsion is continuously added dropwise to the reaction solution over 5 hours After the resulting aqueous emulsion has cooled to room temperature