吡仑帕奈杂质17

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 500 ml round bottom flask was charged with 12.2 grams (65.4 mmol) of 2-cyanophenylboronic acid propanediol ester, 14.0 g (65.4 mmol) of 2-bromo-4-isopropylaniline, 2.27 (2 mmol) tetrakis(triphenylphosphine)palladium, 18.0 g (131 mmol) of potassium carbonate, 150 ml toluene, and 50 ml ethanol. The reaction was heated to reflux under N2 for 18 hours. After cooling to room temperature the reaction was extracted with ethyl acetate and water. The organic was washed with brine and then dried with magnesium sulfate. The solids were collected by filtration and the solvent removed from filtrate. The product was purified by silica gel chromatography using 94.5% dichloromethane, 5% methanol, 0.5% ammonium hydroxide as the eluent. The fractions containing the desired product were combined and the solvent removed. The product was confirmed by NMR and mass spectroscopy. The reaction was heated to reflux under N2 for 18 hours was extracted with ethyl acetate and water The organic was washed with brine dried with magnesium sulfate The solids were collected by filtration the solvent removed from filtrate The product was purified by silica gel chromatography The fractions containing the desired product the solvent removed

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 20.0 g (87.7 mmol) 2-(1,3,2-dioxaborinan-2-yl)benzonitrile, 13.7 g (73.1 mmol) 2-bromo-4-butylaniline, 1.70 g (1.46 mmol) tetrakis(triphenylphosphine)palladium(0), and 27.2 g (198 mmol) potassium carbonate where refluxed in 400 mL toluene and 200 mL ethanol under N2 atmosphere for 20 h. HPLC and TLC revealed almost complete consumption of the aniline. An additional 1.8 g 2-(1,3,2-dioxaborinan-2-yl)benzonitrile was added and refluxed continued for an additional 18 h. The reaction mixture was cooled and passed through a filter. The solids were washed with ethyl acetate to remove organics from the collected base. The filtrate was then evaporated down and dried on silica. The sample was purified using silica gel chromatography with 100% ethyl acetate as the eluent. The product fractions were then evaporated down to a minimal amount and the product recrystallized from EtOAc/hexanes to give 12.0 g of the title compound as light yellow solids (65.9% yield, GC-MS confirmed). consumption of the aniline An additional 1.8 g 2-(1,3,2-dioxaborinan-2-yl)benzonitrile was added refluxed The reaction mixture was cooled The solids were washed with ethyl acetate to remove organics from the collected base The filtrate was then evaporated down dried on silica The sample was purified The product fractions were then evaporated down to a minimal amount the product recrystallized from EtOAc/hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 13.1 g (69.8 mmol) 2-(1,3,2-dioxaborinan-2-yl)benzonitrile, 16.3 g (63.4 mmol) 2-bromo-4-hexylaniline, 1.62 g (1.40 mmol) tetrakis(triphenylphosphine) palladium(0), and 23.6 g (171 mmol) potassium carbonate where refluxed in 250 ml toluene and 100 ml EtOH under N2 atmosphere for 20 hours. HPLC and TLC revealed almost complete consumption of the aniline. The reaction mixture was cooled and passed through a filter. The solids were washed with ethyl acetate to remove organics from the collected base. The filtrate was then evaporated down and dried on silica. The sample was purified using silica gel chromatography with 100% ethyl acetate as the eluent. The product fractions were then evaporated down to a minimal amount and hexanes added to crystallize the product as off white solids (7.05 g, 39.8% yield, GC-MS confirmed). consumption of the aniline The reaction mixture was cooled The solids were washed with ethyl acetate to remove organics from the collected base The filtrate was then evaporated down dried on silica The sample was purified The product fractions were then evaporated down to a minimal amount and hexanes added to crystallize the product as off white solids (7.05 g, 39.8% yield, GC-MS confirmed)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 35.7 g (190 mmol) 2-(1,3,2-dioxaborinan-2-yl)benzonitrile, 31.9 g (158 mmol) 2-bromo-4-(tertbutyl)aniline, 3.6 g (3.16 mmol) tetrakis(triphenylphosphine) palladium(0) and 59.0 g (427 mmol) K2CO3 were heated to reflux in a 2 L flask containing 400 ml toluene and 300 mL ethanol. The reaction mixture was heated for 19 hours under constant N2 purge. HPLC of the reaction mixture indicated consumption of the starting aniline. The mixture was cooled and then filtered to remove the base. The base was washed with EtOAc to remove trace organic. The combined filtrate was evaporated down to give impure oil. The oil was purified on a column of silica using 95/5/0.05 CH2Cl2/MeOH/NH4OH as eluent to obtain separation. The product fractions were evaporated of solvent and the resultant residue recrystallized from CH2Cl2/hexanes to yield 14.0 g of the target compound as white solids (35.5% yield, confirmed by GC-MS). to reflux in a 2 L flask The reaction mixture was heated for 19 hours under constant N2 purge consumption of the starting aniline The mixture was cooled filtered to remove the base The base was washed with EtOAc to remove trace organic The combined filtrate was evaporated down to give impure oil The oil was purified on a column of silica using 95/5/0.05 CH2Cl2/MeOH/NH4OH as eluent to obtain separation The product fractions were evaporated of solvent the resultant residue recrystallized from CH2Cl2/hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 500 ml round bottom flask was charged with 12.2 grams (65.4 mmol) of 2-cyanophenylboronic acid propanediol ester, 14.0 g (65.4 mmol) of 2-bromo-4-isopropylaniline, 2.27 (2 mmol) tetrakis(triphenylphosphine)palladium, 18.0 g (131 mmol) of potassium carbonate, 150 ml toluene, and 50 ml ethanol. The reaction was heated to reflux under N2 for 18 hours. After cooling to room temperature the reaction was extracted with ethyl acetate and water. The organic was washed with brine and then dried with magnesium sulfate. The solids were collected by filtration and the solvent removed from filtrate. The product was purified by silica gel chromatography using 94.5% dichloromethane, 5% methanol, 0.5% ammonium hydroxide as the eluent. The fractions containing the desired product were combined and the solvent removed. The product was confirmed by NMR and mass spectroscopy. The reaction was heated to reflux under N2 for 18 hours was extracted with ethyl acetate and water The organic was washed with brine dried with magnesium sulfate The solids were collected by filtration the solvent removed from filtrate The product was purified by silica gel chromatography The fractions containing the desired product the solvent removed

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 20.0 g (87.7 mmol)2-(1,3,2-dioxaborinan-2-yl)benzonitrile, 13.7 g (73.1 mmol) 2-bromo-4-butylaniline, 1.70 g (1.46 mmol) tetrakis(triphenylphosphine)palladium(0), and 27.2 g (198 mmol) potassium carbonate where refluxed in 400 mL toluene and 200 mL ethanol under N2 atmosphere for 20 h. HPLC and TLC revealed almost complete consumption of the aniline. An additional 1.8 g 2-(1,3,2-dioxaborinan-2-yl)benzonitrile was added and refluxed continued for an additional 18 h. The reaction mixture was cooled and passed through a filter. The solids were washed with ethyl acetate to remove organics from the collected base. The filtrate was then evaporated down and dried on silica. The sample was purified using silica gel chromatography with 100% ethyl acetate as the eluent. The product fractions were then evaporated down to a minimal amount and the product recrystallized from EtOAc/hexanes to give 12.0 g of the title compound as light yellow solids (65.9% yield, GC-MS confirmed). consumption of the aniline An additional 1.8 g 2-(1,3,2-dioxaborinan-2-yl)benzonitrile was added refluxed The reaction mixture was cooled The solids were washed with ethyl acetate to remove organics from the collected base The filtrate was then evaporated down dried on silica The sample was purified The product fractions were then evaporated down to a minimal amount the product recrystallized from EtOAc/hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 13.1 g (69.8 mmol)2-(1,3,2-dioxaborinan-2-yl)benzonitrile, 16.3 g (63.4 mmol) 2-bromo-4-hexylaniline, 1.62 g (1.40 mmol) tetrakis(triphenylphosphine) palladium(0), and 23.6 g (171 mmol) potassium carbonate where refluxed in 250 ml toluene and 100 ml EtOH under N2 atmosphere for 20 hours. HPLC and TLC revealed almost complete consumption of the aniline. The reaction mixture was cooled and passed through a filter. The solids were washed with ethyl acetate to remove organics from the collected base. The filtrate was then evaporated down and dried on silica. The sample was purified using silica gel chromatography with 100% ethyl acetate as the eluent. The product fractions were then evaporated down to a minimal amount and hexanes added to crystallize the product as off white solids (7.05 g, 39.8% yield, GC-MS confirmed). consumption of the aniline The reaction mixture was cooled The solids were washed with ethyl acetate to remove organics from the collected base The filtrate was then evaporated down dried on silica The sample was purified The product fractions were then evaporated down to a minimal amount and hexanes added to crystallize the product as off white solids (7.05 g, 39.8% yield, GC-MS confirmed)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 13.1 g (69.8 mmol)2-(1,3,2-dioxaborinan-2-yl)benzonitrile, 16.3 g (63.4 mmol) 2-bromo-4-hexylaniline, 1.62 g (1.40 mmol) tetrakis(triphenylphosphine) palladium(0), and 23.6 g (171 mmol) potassium carbonate where refluxed in 250 ml toluene and 100 ml EtOH under N2 atmosphere for 20 hours. HPLC and TLC revealed almost complete consumption of the aniline. The reaction mixture was cooled and passed through a filter. The solids were washed with ethyl acetate to remove organics from the collected base. The filtrate was then evaporated down and dried on silica. The sample was purified using silica gel chromatography with 100% ethyl acetate as the eluent. The product fractions were then evaporated down to a minimal amount and hexanes added to crystallize the product as off white solids (7.05 g, 39.8% yield, GC-MS confirmed). consumption of the aniline The reaction mixture was cooled The solids were washed with ethyl acetate to remove organics from the collected base The filtrate was then evaporated down dried on silica The sample was purified The product fractions were then evaporated down to a minimal amount and hexanes added to crystallize the product as off white solids (7.05 g, 39.8% yield, GC-MS confirmed)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 35.7 g (190 mmol)2-(1,3,2-dioxaborinan-2-yl)benzonitrile, 31.9 g (158 mmol) 2-bromo-4-(tertbutyl)aniline, 3.6 g (3.16 mmol) tetrakis(triphenylphosphine) palladium(0) and 59.0 g (427 mmol) K2CO3 were heated to reflux in a 2 L flask containing 400 ml toluene and 300 mL ethanol. The reaction mixture was heated for 19 hours under constant N2 purge. HPLC of the reaction mixture indicated consumption of the starting aniline. The mixture was cooled and then filtered to remove the base. The base was washed with EtOAc to remove trace organic. The combined filtrate was evaporated down to give impure oil. The oil was purified on a column of silica using 95/5/0.05 CH2Cl2/MeOH/NH4OH as eluent to obtain separation. The product fractions were evaporated of solvent and the resultant residue recrystallized from CH2Cl2/hexanes to yield 14.0 g of the target compound as white solids (35.5% yield, confirmed by GC-MS). to reflux in a 2 L flask The reaction mixture was heated for 19 hours under constant N2 purge consumption of the starting aniline The mixture was cooled filtered to remove the base The base was washed with EtOAc to remove trace organic The combined filtrate was evaporated down to give impure oil The oil was purified on a column of silica using 95/5/0.05 CH2Cl2/MeOH/NH4OH as eluent to obtain separation The product fractions were evaporated of solvent the resultant residue recrystallized from CH2Cl2/hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 49.0 g (334 mmol)2-cyanobenzeneboronic acid and 25.9 g (340 mmol) 1,3-propanediol were dissolved in 1 L CH2Cl2 with stirring in a 2 L round bottom flask for 20 h. The solution was then poured over a filter with suction to remove gummy solids. The filtrate was then dried with anhydrous MgSO4 to remove residual water, filtered and evaporated of solvent to give light-colored oil. The oil was then dissolved in CH2Cl2 and purified on a silica gel plug using CH2Cl2 as eluent. The product fractions were evaporated down to give the product as clear oil (35.7 g, 57.2% yield). The solution was then poured over a filter with suction to remove gummy solids The filtrate was then dried with anhydrous MgSO4 to remove residual water filtered evaporated of solvent to give light-colored oil purified on a silica gel plug The product fractions were evaporated down

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 49.0 g (334 mmol)2-cyanobenzeneboronic acid and 25.9 g (340 mmol) 1,3-propanediol were dissolved in 1 L CH2Cl2 with stirring in a 2 L round bottom flask for 20 h. The solution was then poured over a filter with suction to remove gummy solids. The filtrate was then dried with anhydrous MgSO4 to remove residual water, filtered and evaporated of solvent to give light-colored oil. The oil was then dissolved in CH2Cl2 and purified on a silica gel plug using CH2Cl2 as eluent. The product fractions were evaporated down to give the product as clear oil (35.7 g, 57.2% yield). The solution was then poured over a filter with suction to remove gummy solids The filtrate was then dried with anhydrous MgSO4 to remove residual water filtered evaporated of solvent to give light-colored oil purified on a silica gel plug The product fractions were evaporated down

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 500 ml round bottom flask was charged with 12.2 grams (65.4 mmol) of 2-cyanophenylboronic acid propanediol ester, 14.0 g (65.4 mmol) of 2-bromo-4-isopropylaniline, 2.27 (2 mmol) tetrakis(triphenylphosphine)palladium, 18.0 g (131 mmol) of potassium carbonate, 150 ml toluene, and 50 ml ethanol. The reaction was heated to reflux under N2 for 18 hours. After cooling to room temperature the reaction was extracted with ethyl acetate and water. The organic was washed with brine and then dried with magnesium sulfate. The solids were collected by filtration and the solvent removed from filtrate. The product was purified by silica gel chromatography using 94.5% dichloromethane, 5% methanol, 0.5% ammonium hydroxide as the eluent. The fractions containing the desired product were combined and the solvent removed. The product was confirmed by NMR and mass spectroscopy. The reaction was heated to reflux under N2 for 18 hours was extracted with ethyl acetate and water The organic was washed with brine dried with magnesium sulfate The solids were collected by filtration the solvent removed from filtrate The product was purified by silica gel chromatography The fractions containing the desired product the solvent removed