4-苯基-3-丁烯-2-醇

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 200 ml stainless steel autoclave were charged 5 g (34.2 mmole) of benzalacetone and 0.213 g (0.171 mmole) of ##STR24## synthesized in Example 4, and 3 ml of tetrahydrofuran and 2 ml of methanol were added thereto, followed by allowing the mixture to react at 30° C. under a hydrogen pressure of 50 kg/cm2 for 45 hours. The solvent was removed by distillation under reduced pressure (10 mmHg), and the reaction product was analyzed by GLC (PEG HT, 25 m, produced by Gasukuro Kogyo K.K.) to find the conversion to be 34.5%. The product was separated into the unreacted ketone and the hydrogenation product by silica gel column chromatography (eluent: hexane/ethyl acetate=4/1 by volume) to obtain 1.73 g of 4-phenyl-3-buten-2-ol having a purity of 89%. [α]D25 : +18.1° (c=5, CS2). were added to react at 30° C. under a hydrogen pressure of 50 kg/cm2 for 45 hours The solvent was removed by distillation under reduced pressure (10 mmHg) the reaction product was analyzed by GLC (PEG HT, 25 m, produced by Gasukuro Kogyo K.K.) The product was separated into the unreacted ketone

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 200 ml stainless steel autoclave were charged 5 g (34.2 mmole) of benzalacetone and 0.213 g (0.171 mmole) of ##STR24## synthesized in Example 4, and 3 ml of tetrahydrofuran and 2 ml of methanol were added thereto, followed by allowing the mixture to react at 30° C. under a hydrogen pressure of 50 kg/cm2 for 45 hours. The solvent was removed by distillation under reduced pressure (10 mmHg), and the reaction product was analyzed by GLC (PEG HT, 25 m, produced by Gasukuro Kogyo K.K.) to find the conversion to be 34.5%. The product was separated into the unreacted ketone and the hydrogenation product by silica gel column chromatography (eluent: hexane/ethyl acetate=4/1 by volume) to obtain 1.73 g of 4-phenyl-3-buten-2-ol having a purity of 89%. [α]D25 : +18.1° (c=5, CS2). were added to react at 30° C. under a hydrogen pressure of 50 kg/cm2 for 45 hours The solvent was removed by distillation under reduced pressure (10 mmHg) the reaction product was analyzed by GLC (PEG HT, 25 m, produced by Gasukuro Kogyo K.K.) The product was separated into the unreacted ketone

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Dimethylformamide (DMF, anhydrous, 14 mL) was cooled to 0-5° C. and phosphorus oxychloride (8.2 mL) was added dropwise over a period of 40 minutes. The resulting solution was added dropwise to a cooled (0-5° C.) solution of 4-phenyl-3-buten-2-ol (10 g) in 32 mL of anhydrous DMF over a period of an hour. The reaction mixture was warmed to room temperature over a 35-minute period and then gradually heated up to 80° C. over a period of 45 minutes. The reaction was stirred at 80° C. for three hours and then cooled to 0-5° C. To the cooled reaction solution was added dropwise a solution of sodium acetate (40 g) in deionized water (100 mL) over a period of one hour. The mixture was then reheated to 80° C., stirred at 80° C. for an additional 10 minutes, cooled down to room temperature and extracted with ether (100 mL) twice. The combined extract was washed with brine (100 mL), dried over anhydrous sodium sulfate, filtered and concentrated under vacuum to yield 8.78 g of the desired 5-phenyl-2,4-pentadienal as a liquid which was used in the next step without further purification. 1H NMR (CDCl3, 300 MHz), δ(ppm) 7.51 (m, 2H), 7.37 (m, 3H), 7.26 (m, 1H), 7.01 (m, 2H), 6.26 (m, 1H). The synthesis is summarized in Scheme I. The resulting solution was added dropwise to gradually heated up to 80° C. over a period of 45 minutes cooled to 0-5° C To the cooled reaction solution was then reheated to 80° C. stirred at 80° C. for an additional 10 minutes cooled down to room temperature extracted with ether (100 mL) twice The combined extract was washed with brine (100 mL) dried over anhydrous sodium sulfate filtered concentrated under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1-Phenyl-2-buten-1-ol (135.88 g) was dissolved in 2300 mL of dioxane and treated with 2750 mL of dilute hydrochloric acid (2.3 mL of concentrated hydrochloric acid in 2750 mL of water) at room temperature. The mixture was stirred overnight and then poured into 4333 mL of ether and neutralized with 2265 mL of saturated aqueous sodium bicarbonate. The aqueous phase was extracted with 1970 mL of ether. The combined extract was dried over anhydrous potassium carbonate. Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes afforded 131.73 g (96.8%) of the desired 4-phenyl-3-buten-2-ol as an oil which was used in the next step without further purification. The aqueous phase was extracted with 1970 mL of ether The combined extract was dried over anhydrous potassium carbonate Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1-Phenyl-2-buten-1-ol (135.88 g) was dissolved in 2300 mL of dioxane and treated with 2750 mL of dilute hydrochloric acid (2.3 mL of concentrated hydrochloric acid in 2750 mL of water) at room temperature. The mixture was stirred overnight and then poured into 4333 mL of ether and neutralized with 2265 mL of saturated aqueous sodium bicarbonate. The aqueous phase was extracted with 1970 mL of ether. The combined extract was dried over anhydrous potassium carbonate. Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes afforded 131.73 g (96.8%) of the desired 4-phenyl-3-buten-2-ol as an oil which was used in the next step without further purification. The aqueous phase was extracted with 1970 mL of ether The combined extract was dried over anhydrous potassium carbonate Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Dimethylformamide (DMF, anhydrous, 14 mL) was cooled to 0–5° C. and phosphorus oxychloride (8.2 mL) was added dropwise over a period of 40 minutes. The resulting solution was added dropwise to a cooled (0–5° C.) solution of 4-phenyl-3-buten-2-ol (10 g) in 32 mL of anhydrous DMF over a period of all hour. The reaction mixture was warmed to room temperature over a 35-minute period and then gradually heated up to 80° C. over a period of 45 minutes. The reaction was stirred at 80° C. for three hours and then cooled to 0–5° C. To the cooled reaction solution was added dropwise a solution of sodium acetate (40 g) in deionized water (100 mL) over a period of one hour. The mixture was then reheated to 80° C., stirred at 80° C. for an additional 10 minutes, cooled down to room temperature and extracted with ether (100 mL) twice. The combined extract was washed with brine (100 mL), dried over anhydrous sodium sulfate, filtered and concentrated under vacuum to yield 8.78 g of the desired 5-phenyl-2,4-pentadienal as a liquid which was used in the next step without further purification. 1H NMR (CDCl3, 300 MHz), δ(ppm) 7.51 (m, 2H), 7.37 (m, 3H), 7.26 (m, 1H), 7.01 (m, 2H), 6.26 (m, 1H). The resulting solution was added dropwise to gradually heated up to 80° C. over a period of 45 minutes cooled to 0–5° C To the cooled reaction solution was then reheated to 80° C. stirred at 80° C. for an additional 10 minutes cooled down to room temperature extracted with ether (100 mL) twice The combined extract was washed with brine (100 mL) dried over anhydrous sodium sulfate filtered concentrated under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1-Phenyl-2-buten-1-ol (135.88 g) was dissolved in 2300 mL of dioxane and treated with 2750 mL of dilute hydrochloric acid (2.3 mL of concentrated hydrochloric acid in 2750 mL of water) at room temperature. The mixture was stirred overnight and then poured into 4333 mL of ether and neutralized with 2265 mL of saturated sodium bicarbonate. The aqueous phase was extracted with 1970 mL of ether. The combined extract was dried over anhydrous potassium carbonate. Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes afforded 131.73 g (96.8%) of the desired 4-phenyl-3-buten-2-ol as an oil which was used in the next step without further purification. The aqueous phase was extracted with 1970 mL of ether The combined extract was dried over anhydrous potassium carbonate Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Dimethylformamide (DMF, anhydrous, 14 mL) was cooled to 0–5° C. and phosphorus oxychloride (8.2 mL) was added dropwise over a period of 40 minutes. The resulting solution was added dropwise to a cooled (0–5° C.) solution of 4-phenyl-3-buten-2-ol (10 g) in 32 mL of anhydrous DMF over a period of an hour. The reaction mixture was warmed to room temperature over a 35-minute period and then gradually heated up to 80° C. over a period of 45 minutes. The reaction was stirred at 80° C. for three hours and then cooled to 0–5° C. To the cooled reaction solution was added dropwise a solution of sodium acetate (40 g) in deionized water (100 mL) over a period of one hour. The mixture was then reheated to 80° C., stirred at 80° C. for an additional 10 minutes, cooled down to room temperature and extracted with ether (100 mL) twice. The combined extract was washed with brine (100 mL), dried over anhydrous sodium sulfate, filtered and concentrated under vacuum to yield 8.78 g of the desired 5-phenyl-2,4-pentadienal as a liquid which was used in the next step without further purification. 1H NMR (CDCl3, 300 MHz), δ(ppm) 7.51 (m, 2H), 7.37 (m, 3H), 7.26 (m, 1H), 7.01 (m, 2H), 6.26 (m, 1H). The resulting solution was added dropwise to gradually heated up to 80° C. over a period of 45 minutes cooled to 0–5° C To the cooled reaction solution was then reheated to 80° C. stirred at 80° C. for an additional 10 minutes cooled down to room temperature extracted with ether (100 mL) twice The combined extract was washed with brine (100 mL) dried over anhydrous sodium sulfate filtered concentrated under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Dimethylformamide (DMF, anhydrous, 14 mL) was cooled to 0–5° C. and phosphorus oxychloride (8.2 mL) was added dropwise over a period of 40 minutes. The resulting solution was added dropwise to a cooled (0–5° C.) solution of 4-phenyl-3-buten-2-ol (10 g) in 32 mL of anhydrous DMF over a period of an hour. The reaction mixture was warmed to room temperature over a 35-minute period and then gradually heated up to 80° C. over a period of 45 minutes. The reaction was stirred at 80° C. for three hours and then cooled to 0–5° C. To the cooled reaction solution was added dropwise a solution of sodium acetate (40 g) in deionized water (100 mL) over a period of one hour. The mixture was then reheated to 80° C., stirred at 80° C. for an additional 10 minutes, cooled down to room temperature and extracted with ether (100 mL) twice. The combined extract was washed with brine (100 mL), dried over anhydrous sodium sulfate, filtered and concentrated under vacuum to yield 8.78 g of the desired 5-phenyl-2,4-pentadienal as a liquid which was used in the next step without further purification. 1H NMR (CDCl3, 300 MHz), δ(ppm) 7.51 (m, 2H), 7.37 (m, 3H), 7.26 (m, 1H), 7.01 (m, 2H), 6.26 (m, 1H). The resulting solution was added dropwise to gradually heated up to 80° C. over a period of 45 minutes cooled to 0–5° C To the cooled reaction solution was then reheated to 80° C. stirred at 80° C. for an additional 10 minutes cooled down to room temperature extracted with ether (100 mL) twice The combined extract was washed with brine (100 mL) dried over anhydrous sodium sulfate filtered concentrated under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1-Phenyl-2-buten-1-ol (135.88 g) was dissolved in 2300 mL of dioxane and treated with 2750 mL of dilute hydrochloric acid (2.3 mL of concentrated hydrochloric acid in 2750 mL of water) at room temperature. The mixture was stirred overnight and then poured into 4333 mL of ether and neutralized with 2265 mL of saturated aqueous sodium bicarbonate. The aqueous phase was extracted with 1970 mL of ether. The combined extract was dried over anhydrous potassium carbonate. Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes afforded 131.73 g (96.8%) of the desired 4-phenyl-3-buten-2-ol as an oil which was used in the next step without further purification. The aqueous phase was extracted with 1970 mL of ether The combined extract was dried over anhydrous potassium carbonate Evaporation of the solvent followed by Kugelrohr distillation at 30° C. for 30 minutes