3-溴苯乙烯

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1.0 M Diethyl zinc in hexanes (27.3 ml, 27.3 mmol) was added to a solution of 2,4,6-trichlorophenol (5.4 g, 27.3 mmol) in dichloromethane (100 ml) at −40° C. After stirring for 15 minutes, diiodo-methane (2.2 mL, 27.3 mmol) was added at −40° C. and stirred for an additional 15 minutes. 1-Bromo-3-vinyl-benzene (2.5 g, 13.7 mmol) was then added to the reaction mixture, allowed to warm to room temperature, and left stirring overnight. The reaction mixture was diluted with dichloromethane, washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine, dried over magnesium sulfate, filtered and concentrated. GC-MS revealed that the reaction mixture contained 1-Bromo-3-cyclopropyl-benzene and 1-bromo-3-vinyl-benzene. To remove the bromo-3-vinyl-benzene, the crude mixture was reacted with potassium permanganate. A solution of potassium permanganate/water (1.5 g/20 mL) was added drop-wise to a solution of the crude mixture (˜3.5 g) in THF (40 mL) at 0° C. and then allowed to warm to room temperature. After 1 hour, the reaction was diluted with diethyl ether, washed with water and saturated brine, dried over anhydrous sodium sulfate filtered and concentrated. Purication by flash column chromatography eluted with 100 hexanes afforded 1-bromo-3-cyclopropyl-benzene (2.20 g, 81%). 1.6 M n-Butyllithium in hexanes (3.2 mL, 5.1 mmol) was added drop-wise to a solution of 1-bromo-3-cyclopropyl-benzene at −78° C. and stirred for 1 hour. This reaction mixture was then transferred via canula to a 250 mL round bottom flask equipped with a stirrer bar approximately ¼ full of solid carbon dioxide and stirred and for 1 hour. The reaction mixture was concentrated and then the residue was diluted with water. The aqueous layer was washed with dichloromethane (3×), acidified with 1 N HCl to pH˜2, and extracted with ethyl acetate. The organic phase was washed with water and saturated brine, dried over anhydrous sodium sulfate, filtered and concentrated to afford 3-cyclopropyl-benzoic (356 mg, 43%, white solid). 1H NMR (DMSO), δ (ppm): 12.90 (bs, 1H), 7.71 (d, 1H), 7.64 (s, 1H), 7.34 (m, 2H), 2.01 (m, 1H), 0.99 (m, 2H), 0.70 (m, 2H). stirred for an additional 15 minutes left stirring overnight washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine dried over magnesium sulfate filtered concentrated To remove the bromo-3-vinyl-benzene the crude mixture was reacted with potassium permanganate to warm to room temperature After 1 hour washed with water and saturated brine dried over anhydrous sodium sulfate filtered concentrated Purication by flash column chromatography eluted with 100 hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1.0 M Diethyl zinc in hexanes (27.3 ml, 27.3 mmol) was added to a solution of 2,4,6-trichlorophenol (5.4 g, 27.3 mmol) in dichloromethane (100 ml) at −40° C. After stirring for 15 minutes, diiodo-methane (2.2 mL, 27.3 mmol) was added at −40° C. and stirred for an additional 15 minutes. 1-Bromo-3-vinyl-benzene (2.5 g, 13.7 mmol) was then added to the reaction mixture, allowed to warm to room temperature, and left stirring overnight. The reaction mixture was diluted with dichloromethane, washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine, dried over magnesium sulfate, filtered and concentrated. GC-MS revealed that the reaction mixture contained 1-Bromo-3-cyclopropyl-benzene and 1-bromo-3-vinyl-benzene. To remove the bromo-3-vinyl-benzene, the crude mixture was reacted with potassium permanganate. A solution of potassium permanganate/water (1.5 g/20 mL) was added drop-wise to a solution of the crude mixture (˜3.5 g) in THF (40 mL) at 0° C. and then allowed to warm to room temperature. After 1 hour, the reaction was diluted with diethyl ether, washed with water and saturated brine, dried over anhydrous sodium sulfate filtered and concentrated. Purication by flash column chromatography eluted with 100 hexanes afforded 1-bromo-3-cyclopropyl-benzene (2.20 g, 81%). 1.6 M n-Butyllithium in hexanes (3.2 mL, 5.1 mmol) was added drop-wise to a solution of 1-bromo-3-cyclopropyl-benzene at −78° C. and stirred for 1 hour. This reaction mixture was then transferred via canula to a 250 mL round bottom flask equipped with a stirrer bar approximately ¼ full of solid carbon dioxide and stirred and for 1 hour. The reaction mixture was concentrated and then the residue was diluted with water. The aqueous layer was washed with dichloromethane (3×), acidified with 1 N HCl to pH˜2, and extracted with ethyl acetate. The organic phase was washed with water and saturated brine, dried over anhydrous sodium sulfate, filtered and concentrated to afford 3-cyclopropyl-benzoic (356 mg, 43%, white solid). 1H NMR (DMSO), δ (ppm): 12.90 (bs, 1H), 7.71 (d, 1H), 7.64 (s, 1H), 7.34 (m, 2H), 2.01 (m, 1H), 0.99 (m, 2H), 0.70 (m, 2H). stirred for an additional 15 minutes left stirring overnight washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine dried over magnesium sulfate filtered concentrated To remove the bromo-3-vinyl-benzene the crude mixture was reacted with potassium permanganate to warm to room temperature After 1 hour washed with water and saturated brine dried over anhydrous sodium sulfate filtered concentrated Purication by flash column chromatography eluted with 100 hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of 1-bromo-3-trimethylsilylethynylbenzene (20.5 g, 81.0 mmol) in degassed methanol (500 ml), there was added potassium hydroxide (31 mg, 0.55 mmol) in water (1 ml). The solution was stirred at room temperature until G.C. analysis indicated the reaction was complete (5.0 h). The reaction mixture was diluted with an equal volume of water, and extracted with n-pentane (5×500 ml). The combined organic layers were dried (MgSO4) and the solvent removed under reduced pressure to yield a yellow liquid. The liquid was distilled via bulb-to-bulb vacuum distillation to yield the product (1c) (13.0 g, 90%) as a clear liquid: bp 40° CC/1 torr; 1H NMR (200 MHz, CDCl3) c3.35(s), 7.23(t), 7.40(m), 7.65(t). (5.0 h) extracted with n-pentane (5×500 ml) The combined organic layers were dried (MgSO4) the solvent removed under reduced pressure to yield a yellow liquid The liquid was distilled via bulb-to-bulb vacuum distillation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of 1-bromo-3-trimethylsilylethynylbenzene (20.5 g, 81.0 mmol) in degassed methanol (500 ml), there was added potassium hydroxide (31 mg, 0.55 mmol) in water (1 ml). The solution was stirred at room temperature until G.C. analysis indicated the reaction was complete (5.0 h). The reaction mixture was diluted with an equal volume of water, and extracted with n-pentane (5×500 ml). The combined organic layers were dried (MgSO4) and the solvent removed under reduced pressure to yield a yellow liquid. The liquid was distilled via bulb-to-bulb vacuum distillation to yield the product (1c) (13.0 g, 90%) as a clear liquid: bp 40° CC/1 torr; 1H NMR (200 MHz, CDCl3) c3.35(s), 7.23(t), 7.40(m), 7.65(t). (5.0 h) extracted with n-pentane (5×500 ml) The combined organic layers were dried (MgSO4) the solvent removed under reduced pressure to yield a yellow liquid The liquid was distilled via bulb-to-bulb vacuum distillation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Borane-dimethylsulphide complex (2.0M in THF, 49 ml) was added dropwise to a stirred solution of 3-bromostyrene (10 g, 55 mmol) in THF (130 ml) at 0° C. and the solution was stirred for 3 h at room temperature. 10% Aqueous sodium hydroxide was added cautiously, followed by hydrogen peroxide (30% wt. solution in water, 6 ml) dropwise. After a further 16 h, the mixture was diluted with water, extracted twice with ethyl acetate, the combined extracts washed with saturated sodium bisulphite solution and saturated sodium chloride solution, dried over sodium sulphate and evaporated to give a colourless oil. Purification by flash chromatography, eluting with 30% diethyl ether/hexane gave a colourless oil, [M+Si(CH3)3 derivative]+ 272. After a further 16 h extracted twice with ethyl acetate the combined extracts washed with saturated sodium bisulphite solution and saturated sodium chloride solution dried over sodium sulphate evaporated to give a colourless oil Purification by flash chromatography eluting with 30% diethyl ether/hexane gave a colourless oil

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Iodine (0.335 g, 1.32 mmol), diiodomethane (4.3 mL, 53.0 mmol) and 3-bromostyrene (5 g, 26.4 mmol) were added successively to a suspension of copper (7.5 g, 118.8 mmol) in toluene (50 mL). The mixture was refluxed for 140 h, then filtered and concentrated in vacuo. The residue was distilled under reduced pressure to afford 3-bromo-1-cyclopropylbenzene (0.55 g, 10%) as a colorless oil. The mixture was refluxed for 140 h filtered concentrated in vacuo The residue was distilled under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Iodine (0.335 g, 1.32 mmol), diiodomethane (4.3 mL, 53.0 mmol) and 3-bromostyrene (5 g, 26.4 mmol) were added successively to a suspension of copper (7.5 g, 118.8 mmol) in toluene (50 mL). The mixture was refluxed for 140 h, then filtered and concentrated in vacuo. The residue was distilled under reduced pressure to afford 3-bromo-1-cyclopropylbenzene (0.55 g, 10%) as a colorless oil. The mixture was refluxed for 140 h filtered concentrated in vacuo The residue was distilled under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred suspension of chloramine B (CAS [127-52-6], 2.97 g), iodine (0.353 g) and trioctylmethylammoniumchloride (Aliquat 336, 0.562 g) in water (40 mL) under argon was added 3-bromostyrene (5.09 g). The mixture was stirred for 2 h at room temperature and subsequently extracted with ethyl acetate. The org. phase was washed with water, dried (MgSO4), filtered and concentrated. The product was purified using column chromatography (SiO2, cyclohexane/ethyl acetate 1:0=>4:1) to give 1-benzenesulfonyl-2-(3-bromo-phenyl)-aziridine (3.18 g) as a light brown oil. subsequently extracted with ethyl acetate phase was washed with water dried (MgSO4) filtered concentrated The product was purified

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1.0 M Diethyl zinc in hexanes (27.3 ml, 27.3 mmol) was added to a solution of 2,4,6-trichlorophenol (5.4 g, 27.3 mmol) in dichloromethane (100 ml) at −40° C. After stirring for 15 minutes, diiodo-methane (2.2 mL, 27.3 mmol) was added at −40° C. and stirred for an additional 15 minutes. 1-Bromo-3-vinyl-benzene (2.5 g, 13.7 mmol) was then added to the reaction mixture, allowed to warm to room temperature, and left stirring overnight. The reaction mixture was diluted with dichloromethane, washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine, dried over magnesium sulfate, filtered and concentrated. GC-MS revealed that the reaction mixture contained 1-Bromo-3-cyclopropyl-benzene and 1-bromo-3-vinyl-benzene. To remove the bromo-3-vinyl-benzene, the crude mixture was reacted with potassium permanganate. A solution of potassium permanganate/water (1.5 g/20 mL) was added drop-wise to a solution of the crude mixture (˜3.5 g) in THF (40 mL) at 0° C. and then allowed to warm to room temperature. After 1 hour, the reaction was diluted with diethyl ether, washed with water and saturated brine, dried over anhydrous sodium sulfate filtered and concentrated. Purication by flash column chromatography eluted with 100 hexanes afforded 1-bromo-3-cyclopropyl-benzene (2.20 g, 81%). 1.6 M n-Butyllithium in hexanes (3.2 mL, 5.1 mmol) was added drop-wise to a solution of 1-bromo-3-cyclopropyl-benzene at −78° C. and stirred for 1 hour. This reaction mixture was then transferred via canula to a 250 mL round bottom flask equipped with a stirrer bar approximately ¼ full of solid carbon dioxide and stirred and for 1 hour. The reaction mixture was concentrated and then the residue was diluted with water. The aqueous layer was washed with dichloromethane (3×), acidified with 1 N HCl to pH˜2, and extracted with ethyl acetate. The organic phase was washed with water and saturated brine, dried over anhydrous sodium sulfate, filtered and concentrated to afford 3-cyclopropyl-benzoic (356 mg, 43%, white solid). 1H NMR (DMSO), δ (ppm): 12.90 (bs, 1H), 7.71 (d, 1H), 7.64 (s, 1H), 7.34 (m, 2H), 2.01 (m, 1H), 0.99 (m, 2H), 0.70 (m, 2H). stirred for an additional 15 minutes left stirring overnight washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine dried over magnesium sulfate filtered concentrated To remove the bromo-3-vinyl-benzene the crude mixture was reacted with potassium permanganate to warm to room temperature After 1 hour washed with water and saturated brine dried over anhydrous sodium sulfate filtered concentrated Purication by flash column chromatography eluted with 100 hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1.0 M Diethyl zinc in hexanes (27.3 ml, 27.3 mmol) was added to a solution of 2,4,6-trichlorophenol (5.4 g, 27.3 mmol) in dichloromethane (100 ml) at −40° C. After stirring for 15 minutes, diiodo-methane (2.2 mL, 27.3 mmol) was added at −40° C. and stirred for an additional 15 minutes. 1-Bromo-3-vinyl-benzene (2.5 g, 13.7 mmol) was then added to the reaction mixture, allowed to warm to room temperature, and left stirring overnight. The reaction mixture was diluted with dichloromethane, washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine, dried over magnesium sulfate, filtered and concentrated. GC-MS revealed that the reaction mixture contained 1-Bromo-3-cyclopropyl-benzene and 1-bromo-3-vinyl-benzene. To remove the bromo-3-vinyl-benzene, the crude mixture was reacted with potassium permanganate. A solution of potassium permanganate/water (1.5 g/20 mL) was added drop-wise to a solution of the crude mixture (˜3.5 g) in THF (40 mL) at 0° C. and then allowed to warm to room temperature. After 1 hour, the reaction was diluted with diethyl ether, washed with water and saturated brine, dried over anhydrous sodium sulfate filtered and concentrated. Purication by flash column chromatography eluted with 100 hexanes afforded 1-bromo-3-cyclopropyl-benzene (2.20 g, 81%). 1.6 M n-Butyllithium in hexanes (3.2 mL, 5.1 mmol) was added drop-wise to a solution of 1-bromo-3-cyclopropyl-benzene at −78° C. and stirred for 1 hour. This reaction mixture was then transferred via canula to a 250 mL round bottom flask equipped with a stirrer bar approximately ¼ full of solid carbon dioxide and stirred and for 1 hour. The reaction mixture was concentrated and then the residue was diluted with water. The aqueous layer was washed with dichloromethane (3×), acidified with 1 N HCl to pH˜2, and extracted with ethyl acetate. The organic phase was washed with water and saturated brine, dried over anhydrous sodium sulfate, filtered and concentrated to afford 3-cyclopropyl-benzoic (356 mg, 43%, white solid). 1H NMR (DMSO), δ (ppm): 12.90 (bs, 1H), 7.71 (d, 1H), 7.64 (s, 1H), 7.34 (m, 2H), 2.01 (m, 1H), 0.99 (m, 2H), 0.70 (m, 2H). stirred for an additional 15 minutes left stirring overnight washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine dried over magnesium sulfate filtered concentrated To remove the bromo-3-vinyl-benzene the crude mixture was reacted with potassium permanganate to warm to room temperature After 1 hour washed with water and saturated brine dried over anhydrous sodium sulfate filtered concentrated Purication by flash column chromatography eluted with 100 hexanes