2,4,6-三氟苯酚

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2,4,6-trifluorophenol (5.00 g) was dissolved in DMF (100 ml), ethyl 2-bromo-2-methylpropanoate (15 ml) and potassium carbonate (7.00 g) were added thereto, followed by stirring at 80° C. overnight. The reaction solution was cooled to room temperature, water was added thereto, followed by extraction with ethyl acetate. The organic layer was washed with a 1M aqueous sodium hydroxide solution and then 1M hydrochloric acid in this order, dried over anhydrous magnesium sulfate, and the solvent was evaporated under reduced pressure. The resulting residue was purified by silica gel column chromatography (n-hexane:ethyl acetate=19:1) to obtain a colorless oily product. The oily product thus obtained was dissolved in ethanol (150 ml), a 1M aqueous sodium hydroxide solution (70 ml) was added thereto, followed by stirring at room temperature for one hour. The reaction solution was concentrated under reduced pressure and water was added to the resulting residue, followed by washing with ethyl acetate. 1M hydrochloric acid was added to the aqueous layer, followed by extraction with ethyl acetate. The organic layer was washed with saturated brine and dried over anhydrous magnesium sulfate and the solvent was evaporated under reduced pressure to obtain 2-methyl-2-(2,4,6-trifluorophenoxy)propanoic acid (7.83 g) as a colorless oily product. The reaction solution was cooled to room temperature followed by extraction with ethyl acetate The organic layer was washed with a 1M aqueous sodium hydroxide solution 1M hydrochloric acid in this order, dried over anhydrous magnesium sulfate the solvent was evaporated under reduced pressure The resulting residue was purified by silica gel column chromatography (n-hexane:ethyl acetate=19:1) to obtain a colorless oily product The oily product thus obtained by stirring at room temperature for one hour The reaction solution was concentrated under reduced pressure and water was added to the resulting residue by washing with ethyl acetate 1M hydrochloric acid was added to the aqueous layer followed by extraction with ethyl acetate The organic layer was washed with saturated brine dried over anhydrous magnesium sulfate the solvent was evaporated under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In scheme II above, the following abbreviations are used: KF is potassium fluoride; DMF is N,N-dimethylformamide; Ar2OH is either 2,3,5,6-tetrafluorophenol, 2,4,6-trifluorophenol or 2,3,6-trifluorophenol; THF is tetahydrofuran; MeOH is methanol. Commercially available bromoketone D is reacted with the appropriately substituted fluorophenol and potassium fluoride to give phenoxy ketone E. The ketone is then reduced with sodium borohydride to give the alcohol F, which is hydrogenated using palladium on carbon as catalyst to give the amino alcohol B′ (Ar2=fluoro-substituted phenyl).

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 4-(2-Methanesulfonyloxymethylphenyl)piperidine-1-carboxylic acid t-butyl ester (27.0 g, 60.6 mmol, 1.0 eq.) was dissolved in MeCN (540 mL) and added to K2CO3 (25 g, 180 mmol, 3.0 eq.) and 2,4,6-trifluorophenol (13.5 g, 90.9 mmol, 1.5 eq.). The mixture was vigorously stirred at 50° C. for 6 hours, removed from the heat, and stirred overnight. The mixture was cooled at room temperature, and diluted with EtOAc (700 mL) and water (700 mL). The phases were separated, and the organic layer was washed twice with 1.0 M NaOH in water (2×400 mL) and saturated aqueous NaCl (1×400 mL), then dried over Na2SO4 and the solvent removed to yield crude 4-[2-(2,4,6-trifluorophenoxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (25.0 g). The crude product was combined with smaller scale runs for a total of 30 g, and purified by chromatography (0-10% EtOAc in hexanes) to yield 4-[2-(2,4,6-trifluorophenoxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (22.0 g). removed from the heat stirred overnight The mixture was cooled at room temperature diluted with EtOAc (700 mL) and water (700 mL) The phases were separated the organic layer was washed twice with 1.0 M NaOH in water (2×400 mL) and saturated aqueous NaCl (1×400 mL) dried over Na2SO4 the solvent removed to yield crude 4-[2-(2,4,6-trifluorophenoxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (25.0 g) purified by chromatography (0-10% EtOAc in hexanes)

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 4-[2-(Toluene-4-sulfonyloxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (2.1 g, 4.7 mmol, 1.0 eq.) was dissolved in MeCN (46 mL, 890 mmol) and added to K2CO3 (1.9 g, 14 mmol, 3.0 eq.) and 2,4,6-trifluorophenol (1.0 g, 7.0 mmol, 1.5 eq.). The mixture was shaken at 50° C. overnight, then cooled to room temperature. The supernatant was separated from the K2CO3 and other solids. TFA (7 mL, 90 mmol, 20.0 eq.) was added to the supernatant and the mixture was shaken overnight at room temperature. The solution was then concentrated to yield a crude residue. The residue was dissolved in 5.0 mL 1:1 AcOH/H2O, then in an additional 2.0 mL AcOH, filtered and purified by preparative HPLC to yield the title compound as a TFA salt (1.3 g, 97.5% purity). MS m/z: [M+H]+ calcd for C18H18F3NO, 322.13. found 322.2. cooled to room temperature The supernatant was separated from the K2CO3 and other solids the mixture was shaken overnight at room temperature The solution was then concentrated to yield a crude residue in an additional 2.0 mL AcOH, filtered purified by preparative HPLC

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 4-[2-(Toluene-4-sulfonyloxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (2.1 g, 4.7 mmol, 1.0 eq.) was dissolved in MeCN (46 mL, 890 mmol) and added to K2CO3 (1.9 g, 14 mmol, 3.0 eq.) and 2,4,6-trifluorophenol (1.0 g, 7.0 mmol, 1.5 eq.). The mixture was shaken at 50° C. overnight, then cooled to room temperature. The supernatant was separated from the K2CO3 and other solids. TFA (7 mL, 90 mmol, 20.0 eq.) was added to the supernatant and the mixture was shaken overnight at room temperature. The solution was then concentrated to yield a crude residue. The residue was dissolved in 5.0 mL 1:1 AcOH/H2O, then in an additional 2.0 mL AcOH, filtered and purified by preparative HPLC to yield the title compound as a TFA salt (1.3 g, 97.5% purity). MS m/z: [M+H]+ calcd for C18H18F3NO, 322.13. found 322.2. cooled to room temperature The supernatant was separated from the K2CO3 and other solids the mixture was shaken overnight at room temperature The solution was then concentrated to yield a crude residue in an additional 2.0 mL AcOH, filtered purified by preparative HPLC

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 4-(2-Methanesulfonyloxymethylphenyl)piperidine-1-carboxylic acid t-butyl ester (27.0 g, 60.6 mmol, 1.0 eq.) was dissolved in MeCN (540 mL) and added to K2CO3 (25 g, 180 mmol, 3.0 eq.) and 2,4,6-trifluorophenol (13.5 g, 90.9 mmol, 1.5 eq.). The mixture was vigorously stirred at 50° C. for 6 hours, removed from the heat, and stirred overnight. The mixture was cooled at room temperature, and diluted with EtOAc (700 mL) and water (700 mL). The phases were separated, and the organic layer was washed twice with 1.0 M NaOH in water (2×400 mL) and saturated aqueous NaCl (1×400 mL), then dried over Na2SO4 and the solvent removed to yield crude 4-[2-(2,4,6-trifluorophenoxymethyl)-phenyl]piperidine-1-carboxylic acid t-butyl ester (25.0 g). The crude product was combined with smaller scale runs for a total of 30 g, and purified by chromatography (0-10% EtOAc in hexanes) to yield 4-[2-(2,4,6-trifluorophenoxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (22.0 g). removed from the heat stirred overnight The mixture was cooled at room temperature diluted with EtOAc (700 mL) and water (700 mL) The phases were separated the organic layer was washed twice with 1.0 M NaOH in water (2×400 mL) and saturated aqueous NaCl (1×400 mL) dried over Na2SO4 the solvent removed to yield crude 4-[2-(2,4,6-trifluorophenoxymethyl)-phenyl]piperidine-1-carboxylic acid t-butyl ester (25.0 g) purified by chromatography (0-10% EtOAc in hexanes)

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 4-[2-(Toluene-4-sulfonyloxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (2.1 g, 4.7 mmol, 1.0 eq.) was dissolved in MeCN (46 mL, 890 mmol) and added to K2CO3 (1.9 g, 14 mmol, 3.0 eq.) and 2,4,6-trifluorophenol (1.0 g, 7.0 mmol, 1.5 eq.). The mixture was shaken at 50° C. overnight, then cooled to room temperature. The supernatant was separated from the K2CO3 and other solids. TFA (7 mL, 90 mmol, 20.0 eq.) was added to the supernatant and the mixture was shaken overnight at room temperature. The solution was then concentrated to yield a crude residue. The residue was dissolved in 5.0 mL 1:1 AcOH/H2O, then in an additional 2.0 mL AcOH, filtered and purified by preparative HPLC to yield the title compound as a TFA salt (1.3 g, 97.5% purity). MS m/z: [M+H]+ calcd for C18H18F3NO, 322.13. found 322.2. cooled to room temperature The supernatant was separated from the K2CO3 and other solids the mixture was shaken overnight at room temperature The solution was then concentrated to yield a crude residue in an additional 2.0 mL AcOH, filtered purified by preparative HPLC

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 4-[2-(Toluene-4-sulfonyloxymethyl)phenyl]piperidine-1-carboxylic acid t-butyl ester (2.1 g, 4.7 mmol, 1.0 eq.) was dissolved in MeCN (46 mL, 890 mmol) and added to K2CO3 (1.9 g, 14 mmol, 3.0 eq.) and 2,4,6-trifluorophenol (1.0 g, 7.0 mmol, 1.5 eq.). The mixture was shaken at 50° C. overnight, then cooled to room temperature. The supernatant was separated from the K2CO3 and other solids. TFA (7 mL, 90 mmol, 20.0 eq.) was added to the supernatant and the mixture was shaken overnight at room temperature. The solution was then concentrated to yield a crude residue. The residue was dissolved in 5.0 mL 1:1 AcOH/H2O, then in an additional 2.0 mL AcOH, filtered and purified by preparative HPLC to yield the title compound as a TFA salt (1.3 g, 97.5% purity). MS m/z: [M+H]+ calcd for C18H18F3NO, 322.13. found 322.2. cooled to room temperature The supernatant was separated from the K2CO3 and other solids the mixture was shaken overnight at room temperature The solution was then concentrated to yield a crude residue in an additional 2.0 mL AcOH, filtered purified by preparative HPLC

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-(2,4,6-Trifluorophenoxy)-1-nitrobenzene (1.14 g, 85%) was prepared from 2,4,6-trifluorophenol (0.74 g, 5.0 mmol) and 1-fluoro-2-nitrobenzene (0.71 g, 5.0 mmol) following the general procedure A. This was reduced to 2-(2,4,6-trifluorophenoxy)aniline (0.42 g, 70%, 2.5 mmol scale) following general procedure B. N-[2-(2,4,6-Trifluorophenoxy)phenyl]-N′-(thiazol-2-yl)urea (219 mg, 60%) was prepared from 2-(2,4,6-trifluorophenoxy)aniline (237 mg, 1.0 mmol) and 2-aminothiazole (100 mg, 1.0 mmol) following the general procedure D.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-(2,4,6-Trifluorophenoxy)-1-nitrobenzene (1.14 g, 85%) was prepared from 2,4,6-trifluorophenol (0.74 g, 5.0 mmol) and 1-fluoro-2-nitrobenzene (0.71 g, 5.0 mmol) following the general procedure A. This was reduced to 2-(2,4,6-trifluorophenoxy)aniline (0.42 g, 70%, 2.5 mmol scale) following general procedure B. N-[2-(2,4,6-Trifluorophenoxy)phenyl]-N′-(thiazol-2-yl)urea (219 mg, 60%) was prepared from 2-(2,4,6-trifluorophenoxy)aniline (237 mg, 1.0 mmol) and 2-aminothiazole (100 mg, 1.0 mmol) following the general procedure D.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-(2,4,6-Trifluorophenoxy)-1-nitrobenzene (1.14 g, 85%) was prepared from 2,4,6-trifluorophenol (0.74 g, 5.0 mmol) and 1-fluoro-2-nitrobenzene (0.71 g, 5.0 mmol) following the general procedure A. This was reduced to 2-(2,4,6-trifluorophenoxy)aniline (0.42 g, 70%, 2.5 mmol scale) following general procedure B. N-[2-(2,4,6-Trifluorophenoxy)phenyl]-N′-(thiazol-2-yl)urea (219 mg, 60%) was prepared from 2-(2,4,6-trifluorophenoxy)aniline (237 mg, 1.0 mmol) and 2-aminothiazole (100 mg, 1.0 mmol) following the general procedure D.