1,8-壬二炔

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2-CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2-CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 100 mg of product 1 are dissolved in 1.1 ml of distilled water; a solution of 200 μl of 1,8-Nonadiyne in 11.23 ml of DMSO are prepared separately, whereas 23.2 mg of doxorubicin hydrochloride are dissolved in 0.5 ml of distilled water. The solution of hyaluronic acid is mixed with that of doxorubicin and with 0.2 ml of that of 1,8-Nonadiyne; 0.1 ml of an aqueous solution obtained with 50 mg of CuSO4.5H2O in 1 ml of H2O and 0.1 ml of an aqueous solution of 20 mg of ascorbic acid are then added. The mixture is stirred vortically for a few minutes. The rapidly formed gel (see FIG. 31) incorporates the doxorubicin hydrochloride inside.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083. Found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2-CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate