(R)-2-氨甲基-1-N-Boc-吡咯烷

反应条件: temp:138.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of 2-[3,5-bis(trifluoromethyl)phenyl]-N-[6-chloro-4-(4-fluoro-2-methylphenyl)-3-pyridinyl]-N,2-dimethylpropanamide [WO 2005/002577] (1.5 g, 2.81 mmol) 1,1-dimethylethyl (2R)-2-(aminomethyl)-1-pyrrolidinecarboxylate (N-Boc prolinamine) (1.41 g, 7.025 mmol) and potassium carbonate (777 mg, 5.62 mmol) in 6 mL of DMSO was heated for 18 h at 150° C. (temperature detected 138° C.). A HPLC/MS check showed a 50% conversion with partial loss of the Boc protecting group. The reaction was heated under microwave irradiation to 160° C. for 1 h and to 180° C. for two cycles of 1 h and 1.5 h, respectively. The suspension was diluted with dichloromethane and extracted with sat. NaHCO3 and the organics were dried (Na2SO4) and the solution was loaded on a SCX cartridge, washed with dichloromethane (100 mL) and methanol (200 mL, this wash allowed the recovery of the unreacted chloropyridine) and eluted with 2M NH3 in MeOH. The crude thus obtained, which contained both the Boc-protected and unprotected compounds, was purified by flash chromatography (silica, cyclohexane:EtOAc 80:20 to EtOAc). Isolated 350 mg of Boc-protected amine and 410 mg of the title compound. This last compound was purified further by a boc-protection, flash chromatography, TFA deprotection and SCX isolation procedure. Final yield: 165 mg. The reaction was heated under microwave irradiation to 160° C. for 1 h and to 180° C. for two cycles of 1 h and 1.5 h extracted with sat. NaHCO3 the organics were dried (Na2SO4) washed with dichloromethane (100 mL) and methanol (200 mL eluted with 2M NH3 in MeOH The crude thus obtained was purified by flash chromatography (silica, cyclohexane:EtOAc 80:20 to EtOAc)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: DIPEA (1.34 ml, 7.5 mmol) was added to a solution of 1,1-dimethylethyl (2R)-2-(aminomethyl)-1-pyrrolidinecarboxylate (1 g, 5 mmol) in 50 ml of DCM; then chloroacetyl chloride (0.418 ml, 5.25 mmol) was slowly added and the reaction mixture stirred 1 h before being worked up. DCM was added and the organic phase was washed with a saturated solution of ammonium chloride. The crude was purified by flash chromatography eluting with cyclohexane/ethyl acetate 8/2 affording 1.28 g of the target material. the organic phase was washed with a saturated solution of ammonium chloride The crude was purified by flash chromatography eluting with cyclohexane/ethyl acetate 8/2 affording 1.28 g of the target material

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: This compound was prepared in an analogous manner as 3-(1H-Pyrrolo[2,3-b]pyridin-4-ylamino)-thiophene-2-carboxylic acid (2-amino-ethyl)-amide using (R)-2-(aminomethyl)-1-N-BOC-pyrrolidine instead of tert-butyl-2-amino ethyl carbamate. LCMS (ESI) 442 (M+H) 1H NMR (400 MHz, DMSO-d6) δ ppm 11.52 (1H, br. s.) 10.48 (1H, br. s.) 10.24 (1H, br. s.) 8.17 (1H, br. s.) 8.02 (1H, d, J=5.47 Hz) 7.79 (1H, d, J=5.27 Hz) 7.44-7.54 (1H, m) 7.31 (1H, d, J=2.73 Hz) 6.82 (1H, br. s.) 6.41 (1H, br. s.) 3.93 (1H, br. s.) 3.39 (1H, br. s.) 3.23 (2H, br.s.) 1.67-1.88 (4H, m) 1.39 (9H, s)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 10% Palladium on charcoal (750 mg) was added to a solution of tert-butyl (2R)-2-(azidomethyl)-1-pyrrolidinecarboxylate (preperation 51)(5.74 g, 25.39 mmol) in ethanol (100 ml). The reaction mixture was hydrogenated @15 psi for 2.5 hrs, after which time the catalyst was filtered off and the solvent evaporated under reduced pressure. The crude product was purified by column chromatography on silica gel using dichloromethane:methanol:0.88 ammonia (90:10:0.5) as the eluant, to afford the title compound and some starting material. The mixture was dissolved in ethanol (100 ml) and 10% palladium on charcoal (500 mg) was added, the mixture was hydrogenated at 30 psi for 18 hrs, after which time the catalyst was filtered off and the solvent evaporated under reduced pressure to afford the title compound as a clear oil, 4.32 g, (85%). for 2.5 hrs after which time the catalyst was filtered off the solvent evaporated under reduced pressure The crude product was purified by column chromatography on silica gel

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 10% Palladium on charcoal (750 mg) was added to a solution of tert-butyl (2R)-2-(azidomethyl)-1-pyrrolidinecarboxylate (preperation 51)(5.74 g, 25.39 mmol) in ethanol (100 ml). The reaction mixture was hydrogenated @15 psi for 2.5 hrs, after which time the catalyst was filtered off and the solvent evaporated under reduced pressure. The crude product was purified by column chromatography on silica gel using dichloromethane:methanol:0.88 ammonia (90:10:0.5) as the eluant, to afford the title compound and some starting material. The mixture was dissolved in ethanol (100 ml) and 10% palladium on charcoal (500 mg) was added, the mixture was hydrogenated at 30 psi for 18 hrs, after which time the catalyst was filtered off and the solvent evaporated under reduced pressure to afford the title compound as a clear oil, 4.32 g, (85%). for 2.5 hrs after which time the catalyst was filtered off the solvent evaporated under reduced pressure The crude product was purified by column chromatography on silica gel

反应条件: temp:138.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of 2-[3,5-bis(trifluoromethyl)phenyl]-N-[6-chloro-4-(4-fluoro-2-methylphenyl)-3-pyridinyl]-N,2-dimethylpropanamide [WO 2005/002577] (1.5 g, 2.81 mmol) 1,1-dimethylethyl (2R)-2-(aminomethyl)-1-pyrrolidinecarboxylate (N-Boc prolinamine) (1.41 g, 7.025 mmol) and potassium carbonate (777 mg, 5.62 mmol) in 6 mL of DMSO was heated for 18 h at 150° C. (temperature detected 138° C.). A HPLC/MS check showed a 50% conversion with partial loss of the Boc protecting group. The reaction was heated under microwave irradiation to 160° C. for 1 h and to 180° C. for two cycles of 1 h and 1.5 h, respectively. The suspension was diluted with dichloromethane and extracted with sat. NaHCO3 and the organics were dried (Na2SO4) and the solution was loaded on a SCX cartridge, washed with dichloromethane (100 mL) and methanol (200 mL, this wash allowed the recovery of the unreacted chloropyridine) and eluted with 2M NH3 in MeOH. The crude thus obtained, which contained both the Boc-protected and unprotected compounds, was purified by flash chromatography (silica, cyclohexane:EtOAc 80:20 to EtOAc). Isolated 350 mg of Boc-protected amine and 410 mg of the title compound. This last compound was purified further by a boc-protection, flash chromatography, TFA deprotection and SCX isolation procedure. Final yield: 165 mg. The reaction was heated under microwave irradiation to 160° C. for 1 h and to 180° C. for two cycles of 1 h and 1.5 h extracted with sat. NaHCO3 the organics were dried (Na2SO4) washed with dichloromethane (100 mL) and methanol (200 mL eluted with 2M NH3 in MeOH The crude thus obtained was purified by flash chromatography (silica, cyclohexane:EtOAc 80:20 to EtOAc)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: DIPEA (1.34 ml, 7.5 mmol) was added to a solution of 1,1-dimethylethyl (2R)-2-(aminomethyl)-1-pyrrolidinecarboxylate (1 g, 5 mmol) in 50 ml of DCM; then chloroacetyl chloride (0.418 ml, 5.25 mmol) was slowly added and the reaction mixture stirred 1 h before being worked up. DCM was added and the organic phase was washed with a saturated solution of ammonium chloride. The crude was purified by flash chromatography eluting with cyclohexane/ethyl acetate 8/2 affording 1.28 g of the target material. the organic phase was washed with a saturated solution of ammonium chloride The crude was purified by flash chromatography eluting with cyclohexane/ethyl acetate 8/2 affording 1.28 g of the target material

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: DIPEA (1.34 ml, 7.5 mmol) was added to a solution of 1,1-dimethylethyl (2R)-2-(aminomethyl)-1-pyrrolidinecarboxylate (1 g, 5 mmol) in 50 ml of DCM; then chloroacetyl chloride (0.418 ml, 5.25 mmol) was slowly added and the reaction mixture stirred 1 h before being worked up. DCM was added and the organic phase was washed with a saturated solution of ammonium chloride. The crude was purified by flash chromatography eluting with cyclohexane/ethyl acetate 8/2 affording 1.28 g of the target material. the organic phase was washed with a saturated solution of ammonium chloride The crude was purified by flash chromatography eluting with cyclohexane/ethyl acetate 8/2 affording 1.28 g of the target material

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The title compound was synthesized in analogy to example 7, using 3-oxo-butyric acid methyl ester as compound of formula R, 2-bromo-1-[2-fluoro-5-chlorophenyl]-ethanone as compound of formula S, (R)-2-aminomethyl-pyrrolidine-1-carboxylic acid tert-butyl ester as R3—(CH2)m—NH2 and cyclohexylamine as R1R2NH, MS (ISP) 518.3 (M+H)+.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The title compound was synthesized in analogy to example 7, using 3-oxo-butyric acid methyl ester as compound of formula R, 2-bromo-1-[2-fluoro-5-chlorophenyl]-ethanone as compound of formula S, (R)-2-aminomethyl-pyrrolidine-1-carboxylic acid tert-butyl ester as R3—(CH2)m—NH2 and cyclohexylamine as R1R2NH, MS (ISP) 518.3 (M+H)+.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 75 mg of 8-[(2,6-difluorobenzyl)oxy]-2,6-dimethylimidazo[1,2-a]pyridine-3-carboxylic acid (Example 21A, 0.23 mmol, 1 equivalent), 90 mg of O-(7-azabenzotriazol-1-yl)-N,N,N′N′-tetramethyluronium hexafluorophosphate (HATU, 0.24 mmol, 1.05 equivalents) and 88 mg of N,N-diisopropylethylamine (0.12 ml, 0.68 mmol, 3 equivalents) were initially charged in 1.4 ml of DMF and stirred at RT for 20 min. 50 mg (0.25 mmol, 1.1 equivalents) of tert-butyl (2R)-2-(aminomethyl)pyrrolidine-1-carboxylate were then added, and the mixture was stirred at RT overnight. The reaction solution was diluted with water/TFA and purified by preparative HPLC (method: RP18 column, mobile phase: acetonitrile/water gradient with addition of 0.1% TFA). This gave 108 mg (76% of theory; purity 100%) of the title compound. the mixture was stirred at RT overnight purified by preparative HPLC (method: RP18 column, mobile phase: acetonitrile/water gradient with addition of 0.1% TFA)

反应条件: temp:138.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of 2-[3,5-bis(trifluoromethyl)phenyl]-N-[6-chloro-4-(4-fluoro-2-methylphenyl)-3-pyridinyl]-N,2-dimethylpropanamide [WO 2005/002577] (1.5 g, 2.81 mmol) 1,1-dimethylethyl (2R)-2-(aminomethyl)-1-pyrrolidinecarboxylate (N-Boc prolinamine) (1.41 g, 7.025 mmol) and potassium carbonate (777 mg, 5.62 mmol) in 6 mL of DMSO was heated for 18 h at 150° C. (temperature detected 138° C.). A HPLC/MS check showed a 50% conversion with partial loss of the Boc protecting group. The reaction was heated under microwave irradiation to 160° C. for 1 h and to 180° C. for two cycles of 1 h and 1.5 h, respectively. The suspension was diluted with dichloromethane and extracted with sat. NaHCO3 and the organics were dried (Na2SO4) and the solution was loaded on a SCX cartridge, washed with dichloromethane (100 mL) and methanol (200 mL, this wash allowed the recovery of the unreacted chloropyridine) and eluted with 2M NH3 in MeOH. The crude thus obtained, which contained both the Boc-protected and unprotected compounds, was purified by flash chromatography (silica, cyclohexane: EtOAc 80:20 to EtOAc). Isolated 350 mg of Boc-protected amine and 410 mg of the title compound. This last compound was purified further by a boc-protection, flash chromatography, TFA deprotection and SCX isolation procedure. Final yield: 165 mg. O.A. HPLC, peak @ 5.20 min, >99% purity (UV). The reaction was heated under microwave irradiation to 160° C. for 1 h and to 180° C. for two cycles of 1 h and 1.5 h extracted with sat. NaHCO3 the organics were dried (Na2SO4) washed with dichloromethane (100 mL) and methanol (200 mL eluted with 2M NH3 in MeOH The crude thus obtained was purified by flash chromatography (silica, cyclohexane: EtOAc 80:20 to EtOAc)