N,N-二乙胺 氧化物

反应条件: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 2.36 g. (10 mmol.) of 4-propadienyl-4-trimethylsilyloxy-1-octyne in 5 ml. of glyme is added a solution of 11 mmol. of bis-(3-methyl-2-butyl)borane in 15 ml. of glyme at 0° C. The mixture is stirred at 25° C. for 90 minutes, cooled to 0° C., and treated portionwise with 3.0 g. of triethylamine oxide. The stirred mixture is maintained at 25°-30° C. for 45 minutes, diluted with 20 ml. of tetrahydrofuran and poured into 100 ml. of ice-cold 15% sodium hydroxide solution, followed immediately with a solution of 8.0 g. of iodine in 20 ml. of tetrahydrofuran. The mixture is stirred at ambient temperature for 30 minutes and then extracted with ether. The extract is washed successively with water, sodium thiosulfate solution and brine; dried over magnesium sulfate; and filtered. The residue obtained after solvent evaporation is subjected to chromatography on silica gel with heptane solvent to afford the title compound as a liquid. at 0° C cooled to 0° C. treated portionwise with 3.0 g The stirred mixture is maintained at 25°-30° C. for 45 minutes diluted with 20 ml The mixture is stirred at ambient temperature for 30 minutes extracted with ether The extract is washed successively with water, sodium thiosulfate solution and brine dried over magnesium sulfate and filtered The residue obtained after solvent evaporation

反应条件: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 2.36 g. (10 mmol.) of 4-propadienyl-4-trimethylsilyloxy-1-octyne in 5 ml. of glyme is added a solution of 11 mmol. of bis-(3-methyl-2-butyl)borane in 15 ml. of glyme at 0° C. The mixture is stirred at 25° C. for 90 minutes, cooled to 0° C., and treated portionwise with 3.0 g. of triethylamine oxide. The stirred mixture is maintained at 25°-30° C. for 45 minutes, diluted with 20 ml. of tetrahydrofuran and poured into 100 ml. of ice-cold 15% sodium hydroxide solution, followed immediately with a solution of 8.0 g. of iodine in 20 ml. of tetrahydrofuran. The mixture is stirred at ambient temperature for 30 minutes and then extracted with ether. The extract is washed successively with water, sodium thiosulfate solution and brine; dried over magnesium sulfate; and filtered. The residue obtained after solvent evaporation is subjected to chromatography on silica gel with heptane solvent to afford the title compound as a liquid. at 0° C cooled to 0° C. treated portionwise with 3.0 g The stirred mixture is maintained at 25°-30° C. for 45 minutes diluted with 20 ml The mixture is stirred at ambient temperature for 30 minutes extracted with ether The extract is washed successively with water, sodium thiosulfate solution and brine dried over magnesium sulfate and filtered The residue obtained after solvent evaporation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Triethylamine oxide and diethylmethylhydroxyammonium iodide were prepared in situ starting triethylamine and 30l% by weight aqueous hydrogen peroxide, and hydroxydiethylamine and methyl iodide.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To 233 ml. of a 0.43M solution of disiamylborane in diglyme cooled to 0° C. under an inert atmosphere is added 23.8 g. (0.100 mole) 4,4-dimethyl-3-tetrahydropyranyloxy-1-octyne (Example 995). The mixture is allowed to come to room temperature and is stirred at ambient temperature for 3 hours. The solution is cooled to 0° C. and 22.5 g. (0.30 mole) of triethylamine oxide is added portionwise such that the temperature is maintained at 0°-5° C. The mixture is stirred at 0° C. for 1 hour and is then poured into 150 ml. of 1 N sodium hydroxide followed immediately by a solution of 25.4 g. (0.100 mole) of iodine in 60 ml. of tetrahydrofuran. The mixture is stirred at ambient temperatures for 0.5 hour and poured into 500 ml. of water. The mixture is decolorized by addition of sodium thiosulfate solution and is extracted into ether. The organic phase is washed with water and the solvent is removed in vacuo. The residue is stirred at room temperature for 20 hours with 900 ml. 3:1:1 tetrahydrofuran-acetic acid-water. The solution is evaporated in vacuo and the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene. is added 23.8 g to come to room temperature The solution is cooled to 0° C. is maintained at 0°-5° C The mixture is stirred at 0° C. for 1 hour is then poured into 150 ml The mixture is stirred at ambient temperatures for 0.5 hour poured into 500 ml is extracted into ether The organic phase is washed with water the solvent is removed in vacuo The residue is stirred at room temperature for 20 hours with 900 ml The solution is evaporated in vacuo the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To 233 ml. of a 0.43M solution of disiamylborane in diglyme cooled to 0° C. under an inert atmosphere is added 23.8 g. (0.100 mole) 4,4-dimethyl-3-tetrahydropyranyloxy-1-octyne (Example 995). The mixture is allowed to come to room temperature and is stirred at ambient temperature for 3 hours. The solution is cooled to 0° C. and 22.5 g. (0.30 mole) of triethylamine oxide is added portionwise such that the temperature is maintained at 0°-5° C. The mixture is stirred at 0° C. for 1 hour and is then poured into 150 ml. of 1 N sodium hydroxide followed immediately by a solution of 25.4 g. (0.100 mole) of iodine in 60 ml. of tetrahydrofuran. The mixture is stirred at ambient temperatures for 0.5 hour and poured into 500 ml. of water. The mixture is decolorized by addition of sodium thiosulfate solution and is extracted into ether. The organic phase is washed with water and the solvent is removed in vacuo. The residue is stirred at room temperature for 20 hours with 900 ml. 3:1:1 tetrahydrofuran-acetic acid-water. The solution is evaporated in vacuo and the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene. is added 23.8 g to come to room temperature The solution is cooled to 0° C. is maintained at 0°-5° C The mixture is stirred at 0° C. for 1 hour is then poured into 150 ml The mixture is stirred at ambient temperatures for 0.5 hour poured into 500 ml is extracted into ether The organic phase is washed with water the solvent is removed in vacuo The residue is stirred at room temperature for 20 hours with 900 ml The solution is evaporated in vacuo the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To 233 ml. of a 0.43N solution of disiamylborane in diglyme cooled to 0° C. under an inert atmosphere is added 23.8 g. (0.100 mole) 4,4-dimethyl-3-tetrahydropyranyloxy-1-octyne (Example 150). The mixture is allowed to come to room temperature and is stirred at ambient temperature for 3 hours. The solution is cooled to 0° C. and 22.5 g. (0.30 mole) of triethylamine oxide is added portionwise such that the temperature is maintained at 0°-5° C. The mixture is stirred at 0° C. for 1 hour and is then poured into 150 ml. of 1N sodium hydroxide followed immediately by a solution of 25.4 g. (0.100 mole) of iodine in 60 ml. of tetrahydrofuran. The mixture is stirred at ambient temperatures for 0.5 hour and poured into 500 ml. of water. The mixture is decolorized by addition of sodium thiosulfate and is extracted into ether. The organic phase is washed with water and the solvent is removed in vacuo. The residue is stirred at room temperature for 20 hours with 900 ml. 3:1:1 tetrahydrofuran-acetic acid-water. The solution is evaporated in vacuo and the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene. is added 23.8 g to come to room temperature The solution is cooled to 0° C. is maintained at 0°-5° C The mixture is stirred at 0° C. for 1 hour is then poured into 150 ml The mixture is stirred at ambient temperatures for 0.5 hour poured into 500 ml is extracted into ether The organic phase is washed with water the solvent is removed in vacuo The residue is stirred at room temperature for 20 hours with 900 ml The solution is evaporated in vacuo the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene

反应条件: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 2.36 g. (10 mmol.) of 4-propadienyl-4-trimethylsilyloxy-1-octyne in 5 ml. of glyme is added a solution of 11 mmol. of bis-(3-methyl-2-butyl)borane in 15 ml. of glyme at 0° C. The mixture is stirred at 25° C. for 90 minutes, cooled to 0° C., and treated portionwise with 3.0 g. of triethylamine oxide. The stirred mixture is maintained at 25°-30° C. for 45 minutes, diluted with 20 ml. of tetrahydrofuran and poured into 100 ml. of ice-cold 15% sodium hydroxide solution, followed immediately with a solution of 8.0 g. of iodine in 20 ml. of tetrahydrofuran. The mixture is stirred at ambient temperature for 30 minutes and then extracted with ether. The extract is washed successively with water, sodium thiosulfate solution and brine; dried over magnesium sulfate; and filtered. The residue obtained after solvent evaporation is subjected to chromatography on silica gel with heptane solvent to afford the title compound as a liquid. at 0° C cooled to 0° C. treated portionwise with 3.0 g The stirred mixture is maintained at 25°-30° C. for 45 minutes diluted with 20 ml The mixture is stirred at ambient temperature for 30 minutes extracted with ether The extract is washed successively with water, sodium thiosulfate solution and brine dried over magnesium sulfate and filtered The residue obtained after solvent evaporation

反应条件: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 2.36 g. (10 mmol.) of 4-propadienyl-4-trimethylsilyloxy-1-octyne in 5 ml. of glyme is added a solution of 11 mmol. of bis-(3-methyl-2-butyl)borane in 15 ml. of glyme at 0° C. The mixture is stirred at 25° C. for 90 minutes, cooled to 0° C., and treated portionwise with 3.0 g. of triethylamine oxide. The stirred mixture is maintained at 25°-30° C. for 45 minutes, diluted with 20 ml. of tetrahydrofuran and poured into 100 ml. of ice-cold 15% sodium hydroxide solution, followed immediately with a solution of 8.0 g. of iodine in 20 ml. of tetrahydrofuran. The mixture is stirred at ambient temperature for 30 minutes and then extracted with ether. The extract is washed successively with water, sodium thiosulfate solution and brine; dried over magnesium sulfate; and filtered. The residue obtained after solvent evaporation is subjected to chromatography on silica gel with heptane solvent to afford the title compound as a liquid. at 0° C cooled to 0° C. treated portionwise with 3.0 g The stirred mixture is maintained at 25°-30° C. for 45 minutes diluted with 20 ml The mixture is stirred at ambient temperature for 30 minutes extracted with ether The extract is washed successively with water, sodium thiosulfate solution and brine dried over magnesium sulfate and filtered The residue obtained after solvent evaporation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To 233 ml. of a 0.43 M solution of disiamylborane in diglyme cooled to 0° C. under an inert atmosphere is added 23.8 g. (0.100 mole) 4,4-dimethyl-3-tetrahydropyranyloxy-1-octyne (Example 995). The mixture is allowed to come to room temperature and is stirred at ambient temperature for 3 hours. The solution is cooled to 0° C. and 22.5 g. (0.30 mole) of triethylamine oxide is added portionwise such that the temperature is maintained at 0°-5° C. The mixture is stirred at 0° C. for 1 hour and is then poured into 150 ml. of 1 N sodium hydroxide followed immediately by a solution of 25.4 g. (0.100 mole) of iodine in 60 ml. of tetrahydrofuran. The mixture is stirred at ambient temperatures for 0.5 hour and poured into 500 ml. of water. The mixture is decolorized by addition of sodium thiosulfate solution and is extracted into ether. The organic phase is washed with water and the solvent is removed in vacuo. The residue is stirred at room temperature for 20 hours with 900 ml. 3:1:1 tetrahydrofuran-acetic acid-water. The solution is evaporated in vacuo and the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene. is added 23.8 g to come to room temperature The solution is cooled to 0° C. is maintained at 0°-5° C The mixture is stirred at 0° C. for 1 hour is then poured into 150 ml The mixture is stirred at ambient temperatures for 0.5 hour poured into 500 ml is extracted into ether The organic phase is washed with water the solvent is removed in vacuo The residue is stirred at room temperature for 20 hours with 900 ml The solution is evaporated in vacuo the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To 233 ml. of a 0.43N solution of disiamylborane in diglyme cooled to 0° C. under an inert atmosphere is added 23.8 g. (0.100 mole) 4,4-dimethyl-3-tetrahydropyranyloxy-1-octyne (Example 150). The mixture is allowed to come to room temperature and is stirred at ambient temperature for 3 hours. The solution is cooled to 0° C. and 22.5 g. (0.30 mole) of triethylamine oxide is added portionwise such that the temperature is maintained at 0°-5° C. The mixture is stirred at 0° C. for 1 hour and is then poured into 150 ml. of 1N sodium hydroxide followed immediately by a solution of 25.4 g. (0.100 mole) of iodine in 60 ml. of tetrahydrofuran. The mixture is stirred at ambient temperatures for 0.5 hour and poured into 500 ml. of water. The mixture is decolorized by addition of sodium thiosulfate and is extracted into ether. The organic phase is washed with water and the solvent is removed in vacuo. The residue is stirred at room temperature for 20 hours with 900 ml. 3:1:1 tetrahydrofuran-acetic acid-water. The solution is evaporated in vacuo and the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene. is added 23.8 g to come to room temperature The solution is cooled to 0° C. is maintained at 0°-5° C The mixture is stirred at 0° C. for 1 hour is then poured into 150 ml The mixture is stirred at ambient temperatures for 0.5 hour poured into 500 ml is extracted into ether The organic phase is washed with water the solvent is removed in vacuo The residue is stirred at room temperature for 20 hours with 900 ml The solution is evaporated in vacuo the residue is chromatographed on silica gel in benzene using 10-20% ethylacetate in benzene

反应条件: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 2.36 g. (10 mmol.) of 4-propadienyl-4-trimethylsilyloxy-1-octyne in 5 ml. of glyme is added a solution of 11 mmol. of bis-(3-methyl-2-butyl)borane in 15 ml. of glyme at 0° C. The mixture is stirred at 25° C. for 90 minutes, cooled to 0° C., and treated portionwise with 3.0 g. of triethylamine oxide. The stirred mixture is maintained at 25°-30° C. for 45 minutes, diluted with 20 ml. of tetrahydrofuran and poured into 100 ml. of ice-cold 15% sodium hydroxide solution, followed immediately with a solution of 8.0 g. of iodine in 20 ml. of tetrahydrofuran. The mixture is stirred at ambient temperature for 30 minutes and then extracted with ether. The extract is washed successively with water, sodium thiosulfate solution and brine; dried over magnesium sulfate; and filtered. The residue obtained after solvent evaporation is subjected to chromatography on silica gel with heptane solvent to afford the title compound as a liquid. at 0° C cooled to 0° C. treated portionwise with 3.0 g The stirred mixture is maintained at 25°-30° C. for 45 minutes diluted with 20 ml The mixture is stirred at ambient temperature for 30 minutes extracted with ether The extract is washed successively with water, sodium thiosulfate solution and brine dried over magnesium sulfate and filtered The residue obtained after solvent evaporation

反应条件: temp:25.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of 2.36 g. (10 mmol.) of 4-propadienyl-4-trimethylsilyloxy-1-octyne in 5 ml. of glyme is added a solution of 11 mmol. of bis-(3-methyl-2-butyl)borane in 15 ml. of glyme at 0° C. The mixture is stirred at 25° C. for 90 minutes, cooled to 0° C., and treated portionwise with 3.0 g. of triethylamine oxide. The stirred mixture is maintained at 25°-30° C. for 45 minutes, diluted with 20 ml. of tetrahydrofuran and poured into 100 ml. of ice-cold 15% sodium hydroxide solution, followed immediately with a solution of 8.0 g. of iodine in 20 ml. of tetrahydrofuran. The mixture is stirred at ambient temperature for 30 minutes and then extracted with ether. The extract is washed successively with water, sodium thiosulfate solution and brine; dried over magnesium sulfate; and filtered. The residue obtained after solvent evaporation is subjected to chromatography on silica gel with heptane solvent to afford the title compound as a liquid. at 0° C cooled to 0° C. treated portionwise with 3.0 g The stirred mixture is maintained at 25°-30° C. for 45 minutes diluted with 20 ml The mixture is stirred at ambient temperature for 30 minutes extracted with ether The extract is washed successively with water, sodium thiosulfate solution and brine dried over magnesium sulfate and filtered The residue obtained after solvent evaporation