4-碘-2-苯甲基苯酚

反应条件: temp:16.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A slurry of zinc (47.0 g, 719 mmol) and DMF (325 ml) was stirred in a 2 L 3-neck round-bottom flask with magnetic stirring. The gray slurry was cooled to 16° C. in an ice bath and iodine (7.60 g, 29.9 mmol) was added (yellow to clear supernatant immediately with exotherm from 16 to 27° C.). Cooled back to 10° C. and added (R)-benzyl 2-(((benzyloxy)carbonyl)amino)-3-iodopropanoate (105 g, 240 mmol) portionwise over 10 min at <25° C. After an additional 10 min between 20 and 25° C., LCMS showed complete zinc insertion (aliquot 2N HCl quench). Added Pd2(dba)3 (0.457 g, 0.499 mmol), 2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl (0.410 g, 0.998 mmol), and 2-(benzyloxy)-4-iodophenol (65.1 g, 200 mmol) in one portion (no exotherm) and stirred at room temperature (start=2:30). After 1 h, an exotherm to 27° C. was observed, so cooled in a room temperature water bath back to 20-25° C. and stirred overnight. After 15 h, 40 min, LC-MS showed complete and clean reaction. Added MTBE (650 mL) and silica (65 g), stirred 15 min, and filtered the gray slurry, washing the gray solid with MTBE (325+130 mL). Washed the yellow filtrate with satd aq NH4Cl (325 mL, temp to 27° C. with a small amount of H2 evolution, at pH ˜5-6) and brine (130 mL), dried (Na2SO4), conc, and FCC (800 g column, 50-100% DCM/heptanes, then to 10% MTBE/DCM; only separating non-polar highly colored impurities and baseline material, upgrading HPLC pa % from 91 to 93 pa %) gave (S)-benzyl 3-(3-(benzyloxy)-4-hydroxyphenyl)-2-(((benzyloxy)carbonyl)amino)propanoate (106 g, 207 mmol, 104% yield) as a light brown oil. 1H NMR showed extra mass primarily CBz alanine Bn ester from protonation of excess alkylzinc during workup. Used without further purification in the next step, assuming quantitative yield. 1H NMR (501 MHz, DMSO-d6) δ 8.86 (s, 1H), 7.80 (d, J=8.0 Hz, 1H), 7.47-7.41 (m, 2H), 7.41-7.08 (m, 13H), 6.94 (d, J=2.0 Hz, 1H), 6.70 (d, J=8.0 Hz, 1H), 6.63 (dd, J=8.0, 1.9 Hz, 1H), 5.15-4.93 (m, 6H), 4.27 (ddd, J=9.7, 7.9, 5.5 Hz, 1H), 2.93 (dd, J=13.8, 5.5 Hz, 1H), 2.78 (dd, J=13.8, 9.8 Hz, 1H). MS (ESI) m/z 512 [M+H]+. Cooled back to 10° C. zinc insertion (aliquot 2N HCl quench) After 1 h to 27° C. so cooled in a room temperature water bath back to 20-25° C. After 15 h 40 min, LC-MS clean reaction filtered the gray slurry washing the gray solid with MTBE (325+130 mL) Washed the yellow filtrate with satd aq NH4Cl (325 mL, temp to 27° C. with a small amount of H2 evolution at pH ˜5-6) and brine (130 mL), dried (Na2SO4) only separating non-polar highly colored impurities and baseline material

反应条件: temp:55.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 2-(benzyloxy)phenol (63.7 ml, 364 mmol) in MeOH (1050 ml) was cooled to −10° C. and sodium iodide (54.5 g, 364 mmol) and sodium hydroxide (382 ml, 764 mmol) were added (NaOH over 5 min, temp to 10° C. and dark solution with NaOH addition). Cooled back to <5° C. and added sodium hypochlorite (247 ml, 400 mmol) dropwise, keeping the temperature at <5° C. After 10 min, removed 500 mL MeOH by rotary evaporation, then added MTBE (730 mL) and 2 N HCl (909 ml, 1818 mmol), washed with 1 N Na2S2O3 (130 mL×3; lighter each time) and brine (64 mL), dried (Na2SO4), conc, and flushed with cyclohexane (100 mL) to a crude yellow solid. Added cyclohexane (130 mL), heated to 55° C. (yellow solution), then cooled slowly, seeding at 45° C. (˜50 mg-solution) and 40° C. (˜50 mg, slurry developed). Continued cooling to room temperature (˜20-25° C.) and stirred vigorously overnight. Filtered, washing with cyclohexane (64 mL), giving crop 1 material (69.93 g, 59%, very pure by 1H NMR, slightly off-white solid). Concentrated the mother liquors to ˜70 mL, seeded, aged 1 h, and sticky dark material was precipitating with product. Added MTBE (7 mL), sonicated (good for color dissolution), stirred 20 min, and filtered. Washed with 10% MTBE/cyclohexane (32 mL), giving crop 2 material (4.65 g, some small impurities by 1H NMR). Overall, isolated 2-(benzyloxy)-4-iodophenol (74.6 g, 229 mmol, 62.9% yield). 1H NMR (501 MHz, DMSO-d6) δ 9.33 (s, 1H), 7.49-7.42 (m, 2H), 7.42-7.35 (m, 2H), 7.35-7.29 (m, 1H), 7.24 (d, J=2.0 Hz, 1H), 7.09 (dd, J=8.3, 2.1 Hz, 1H), 6.64 (d, J=8.3 Hz, 1H), 5.09 (s, 2H). Cooled back to <5° C. at <5° C removed 500 mL MeOH by rotary evaporation lighter each time) and brine (64 mL), dried (Na2SO4) conc, and flushed with cyclohexane (100 mL) to a crude yellow solid cooled slowly seeding at 45° C. (˜50 mg-solution) and 40° C. (˜50 mg, slurry developed) Continued cooling to room temperature (˜20-25° C.) Filtered washing with cyclohexane (64 mL) giving crop 1 material (69.93 g, 59% Concentrated the mother liquors to ˜70 mL aged 1 h sticky dark material was precipitating with product Added MTBE (7 mL), sonicated (good for color dissolution) stirred 20 min filtered Washed with 10% MTBE/cyclohexane (32 mL) giving crop 2 material (4.65 g

反应条件: temp:16.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A slurry of zinc (47.0 g, 719 mmol) and DMF (325 ml) was stirred in a 2 L 3-neck round-bottom flask with magnetic stirring. The gray slurry was cooled to 16° C. in an ice bath and iodine (7.60 g, 29.9 mmol) was added (yellow to clear supernatant immediately with exotherm from 16 to 27° C.). Cooled back to 10° C. and added (R)-benzyl 2-(((benzyloxy)carbonyl)amino)-3-iodopropanoate (105 g, 240 mmol) portionwise over 10 min at <25° C. After an additional 10 min between 20 and 25° C., LCMS showed complete zinc insertion (aliquot 2N HCl quench). Added Pd2(dba)3 (0.457 g, 0.499 mmol), 2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl (0.410 g, 0.998 mmol), and 2-(benzyloxy)-4-iodophenol (65.1 g, 200 mmol) in one portion (no exotherm) and stirred at room temperature (start=2:30). After 1 h, an exotherm to 27° C. was observed, so cooled in a room temperature water bath back to 20-25° C. and stirred overnight. After 15 h, 40 min, LC-MS showed complete and clean reaction. Added MTBE (650 mL) and silica (65 g), stirred 15 min, and filtered the gray slurry, washing the gray solid with MTBE (325+130 mL). Washed the yellow filtrate with satd aq NH4Cl (325 mL, temp to 27° C. with a small amount of H2 evolution, at pH ˜5-6) and brine (130 mL), dried (Na2SO4), conc, and FCC (800 g column, 50-100% DCM/heptanes, then to 10% MTBE/DCM; only separating non-polar highly colored impurities and baseline material, upgrading HPLC pa % from 91 to 93 pa %) gave (S)-benzyl 3-(3-(benzyloxy)-4-hydroxyphenyl)-2-(((benzyloxy)carbonyl)amino)propanoate (106 g, 207 mmol, 104% yield) as a light brown oil. 1H NMR showed extra mass primarily CBz alanine Bn ester from protonation of excess alkylzinc during workup. Used without further purification in the next step, assuming quantitative yield. 1H NMR (501 MHz, DMSO-d6) δ 8.86 (s, 1H), 7.80 (d, J=8.0 Hz, 1H), 7.47-7.41 (m, 2H), 7.41-7.08 (m, 13H), 6.94 (d, J=2.0 Hz, 1H), 6.70 (d, J=8.0 Hz, 1H), 6.63 (dd, J=8.0, 1.9 Hz, 1H), 5.15-4.93 (m, 6H), 4.27 (ddd, J=9.7, 7.9, 5.5 Hz, 1H), 2.93 (dd, J=13.8, 5.5 Hz, 1H), 2.78 (dd, J=13.8, 9.8 Hz, 1H). MS (ESI) m/z 512 [M+H]+. Cooled back to 10° C. zinc insertion (aliquot 2N HCl quench) After 1 h to 27° C. so cooled in a room temperature water bath back to 20-25° C. After 15 h 40 min, LC-MS clean reaction filtered the gray slurry washing the gray solid with MTBE (325+130 mL) Washed the yellow filtrate with satd aq NH4Cl (325 mL, temp to 27° C. with a small amount of H2 evolution at pH ˜5-6) and brine (130 mL), dried (Na2SO4) only separating non-polar highly colored impurities and baseline material

反应条件: temp:55.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 2-(benzyloxy)phenol (63.7 ml, 364 mmol) in MeOH (1050 ml) was cooled to −10° C. and sodium iodide (54.5 g, 364 mmol) and sodium hydroxide (382 ml, 764 mmol) were added (NaOH over 5 min, temp to 10° C. and dark solution with NaOH addition). Cooled back to <5° C. and added sodium hypochlorite (247 ml, 400 mmol) dropwise, keeping the temperature at <5° C. After 10 min, removed 500 mL MeOH by rotary evaporation, then added MTBE (730 mL) and 2 N HCl (909 ml, 1818 mmol), washed with 1 N Na2S2O3 (130 mL×3; lighter each time) and brine (64 mL), dried (Na2SO4), conc, and flushed with cyclohexane (100 mL) to a crude yellow solid. Added cyclohexane (130 mL), heated to 55° C. (yellow solution), then cooled slowly, seeding at 45° C. (˜50 mg-solution) and 40° C. (˜50 mg, slurry developed). Continued cooling to room temperature (˜20-25° C.) and stirred vigorously overnight. Filtered, washing with cyclohexane (64 mL), giving crop 1 material (69.93 g, 59%, very pure by 1H NMR, slightly off-white solid). Concentrated the mother liquors to ˜70 mL, seeded, aged 1 h, and sticky dark material was precipitating with product. Added MTBE (7 mL), sonicated (good for color dissolution), stirred 20 min, and filtered. Washed with 10% MTBE/cyclohexane (32 mL), giving crop 2 material (4.65 g, some small impurities by 1H NMR). Overall, isolated 2-(benzyloxy)-4-iodophenol (74.6 g, 229 mmol, 62.9% yield). 1H NMR (501 MHz, DMSO-d6) δ 9.33 (s, 1H), 7.49-7.42 (m, 2H), 7.42-7.35 (m, 2H), 7.35-7.29 (m, 1H), 7.24 (d, J=2.0 Hz, 1H), 7.09 (dd, J=8.3, 2.1 Hz, 1H), 6.64 (d, J=8.3 Hz, 1H), 5.09 (s, 2H). Cooled back to <5° C. at <5° C removed 500 mL MeOH by rotary evaporation lighter each time) and brine (64 mL), dried (Na2SO4) conc, and flushed with cyclohexane (100 mL) to a crude yellow solid cooled slowly seeding at 45° C. (˜50 mg-solution) and 40° C. (˜50 mg, slurry developed) Continued cooling to room temperature (˜20-25° C.) Filtered washing with cyclohexane (64 mL) giving crop 1 material (69.93 g, 59% Concentrated the mother liquors to ˜70 mL aged 1 h sticky dark material was precipitating with product Added MTBE (7 mL), sonicated (good for color dissolution) stirred 20 min filtered Washed with 10% MTBE/cyclohexane (32 mL) giving crop 2 material (4.65 g

反应条件: temp:16.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A slurry of zinc (47.0 g, 719 mmol) and DMF (325 ml) was stirred in a 2 L 3-neck round-bottom flask with magnetic stirring. The gray slurry was cooled to 16° C. in an ice bath and iodine (7.60 g, 29.9 mmol) was added (yellow to clear supernatant immediately with exotherm from 16 to 27° C.). Cooled back to 10° C. and added (R)-benzyl 2-(((benzyloxy)carbonyl)amino)-3-iodopropanoate (105 g, 240 mmol) portionwise over 10 min at <25° C. After an additional 10 min between 20 and 25° C., LCMS showed complete zinc insertion (aliquot 2N HCl quench). Added Pd2(dba)3 (0.457 g, 0.499 mmol), 2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl (0.410 g, 0.998 mmol), and 2-(benzyloxy)-4-iodophenol (65.1 g, 200 mmol) in one portion (no exotherm) and stirred at room temperature (start=2:30). After 1 h, an exotherm to 27° C. was observed, so cooled in a room temperature water bath back to 20-25° C. and stirred overnight. After 15 h, 40 min, LC-MS showed complete and clean reaction. Added MTBE (650 mL) and silica (65 g), stirred 15 min, and filtered the gray slurry, washing the gray solid with MTBE (325+130 mL). Washed the yellow filtrate with satd aq NH4Cl (325 mL, temp to 27° C. with a small amount of H2 evolution, at pH ˜5-6) and brine (130 mL), dried (Na2SO4), conc, and FCC (800 g column, 50-100% DCM/heptanes, then to 10% MTBE/DCM; only separating non-polar highly colored impurities and baseline material, upgrading HPLC pa % from 91 to 93 pa %) gave (S)-benzyl 3-(3-(benzyloxy)-4-hydroxyphenyl)-2-(((benzyloxy)carbonyl)amino)propanoate (106 g, 207 mmol, 104% yield) as a light brown oil. 1H NMR showed extra mass primarily CBz alanine Bn ester from protonation of excess alkylzinc during workup. Used without further purification in the next step, assuming quantitative yield. 1H NMR (501 MHz, DMSO-d6) δ 8.86 (s, 1H), 7.80 (d, J=8.0 Hz, 1H), 7.47-7.41 (m, 2H), 7.41-7.08 (m, 13H), 6.94 (d, J=2.0 Hz, 1H), 6.70 (d, J=8.0 Hz, 1H), 6.63 (dd, J=8.0, 1.9 Hz, 1H), 5.15-4.93 (m, 6H), 4.27 (ddd, J=9.7, 7.9, 5.5 Hz, 1H), 2.93 (dd, J=13.8, 5.5 Hz, 1H), 2.78 (dd, J=13.8, 9.8 Hz, 1H). MS (ESI) m/z 512 [M+H]+. Cooled back to 10° C. zinc insertion (aliquot 2N HCl quench) After 1 h to 27° C. so cooled in a room temperature water bath back to 20-25° C. After 15 h 40 min, LC-MS clean reaction filtered the gray slurry washing the gray solid with MTBE (325+130 mL) Washed the yellow filtrate with satd aq NH4Cl (325 mL, temp to 27° C. with a small amount of H2 evolution at pH ˜5-6) and brine (130 mL), dried (Na2SO4) only separating non-polar highly colored impurities and baseline material

反应条件: temp:55.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 2-(benzyloxy)phenol (63.7 ml, 364 mmol) in MeOH (1050 ml) was cooled to −10° C. and sodium iodide (54.5 g, 364 mmol) and sodium hydroxide (382 ml, 764 mmol) were added (NaOH over 5 min, temp to 10° C. and dark solution with NaOH addition). Cooled back to <5° C. and added sodium hypochlorite (247 ml, 400 mmol) dropwise, keeping the temperature at <5° C. After 10 min, removed 500 mL MeOH by rotary evaporation, then added MTBE (730 mL) and 2 N HCl (909 ml, 1818 mmol), washed with 1 N Na2S2O3 (130 mL×3; lighter each time) and brine (64 mL), dried (Na2SO4), conc, and flushed with cyclohexane (100 mL) to a crude yellow solid. Added cyclohexane (130 mL), heated to 55° C. (yellow solution), then cooled slowly, seeding at 45° C. (˜50 mg-solution) and 40° C. (˜50 mg, slurry developed). Continued cooling to room temperature (˜20-25° C.) and stirred vigorously overnight. Filtered, washing with cyclohexane (64 mL), giving crop 1 material (69.93 g, 59%, very pure by 1H NMR, slightly off-white solid). Concentrated the mother liquors to ˜70 mL, seeded, aged 1 h, and sticky dark material was precipitating with product. Added MTBE (7 mL), sonicated (good for color dissolution), stirred 20 min, and filtered. Washed with 10% MTBE/cyclohexane (32 mL), giving crop 2 material (4.65 g, some small impurities by 1H NMR). Overall, isolated 2-(benzyloxy)-4-iodophenol (74.6 g, 229 mmol, 62.9% yield). 1H NMR (501 MHz, DMSO-d6) δ 9.33 (s, 1H), 7.49-7.42 (m, 2H), 7.42-7.35 (m, 2H), 7.35-7.29 (m, 1H), 7.24 (d, J=2.0 Hz, 1H), 7.09 (dd, J=8.3, 2.1 Hz, 1H), 6.64 (d, J=8.3 Hz, 1H), 5.09 (s, 2H). Cooled back to <5° C. at <5° C removed 500 mL MeOH by rotary evaporation lighter each time) and brine (64 mL), dried (Na2SO4) conc, and flushed with cyclohexane (100 mL) to a crude yellow solid cooled slowly seeding at 45° C. (˜50 mg-solution) and 40° C. (˜50 mg, slurry developed) Continued cooling to room temperature (˜20-25° C.) Filtered washing with cyclohexane (64 mL) giving crop 1 material (69.93 g, 59% Concentrated the mother liquors to ˜70 mL aged 1 h sticky dark material was precipitating with product Added MTBE (7 mL), sonicated (good for color dissolution) stirred 20 min filtered Washed with 10% MTBE/cyclohexane (32 mL) giving crop 2 material (4.65 g