2-(4-叔-丁基苯基)乙腈

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1.00 g of 4-tert-butylphenylacetonitrile and 1.23 g of 1-methyl-3,5-dichloropyrazole-4-carbonyl chloride were dissolved in 20 ml of THF, and 1.01 g of potassium t-butoxide was added thereto with cooling with ice. After the resulting mixture was stirred overnight at room temperature, water was added thereto, acidified with diluted hydrochloric acid, and extracted with ethyl acetate. The organic layer was washed with water, and dried with sodium sulfate, and the solvent was distilled off under reduced pressure. The residual product was dissolved in a mixed solvent of 10 ml of water and 10 ml of dioxane, and 0.38 g of potassium hydroxide was added thereto and heated under reflux for 4 hours. After having been left to be at room temperature, this was acidified with diluted hydrochloric acid, and extracted with ethyl acetate. The organic layer was washed with water, and dried over sodium sulfate, and the solvent was distilled off under reduced pressure. The residual product was purified through silica gel column chromatography to obtain 0.64 g of 2-(4-tert-butylphenyl)-3-(l-methyl-3,5-dichloropyrazol-4-yl)-3-hydroxyacrylonitrile from the fraction eluted with n-hexane:ethyl acetate=2:1. with cooling with ice extracted with ethyl acetate The organic layer was washed with water dried with sodium sulfate the solvent was distilled off under reduced pressure The residual product was dissolved in a mixed solvent of 10 ml of water and 10 ml of dioxane, and 0.38 g of potassium hydroxide was added heated under reflux for 4 hours After having been left to be at room temperature extracted with ethyl acetate The organic layer was washed with water dried over sodium sulfate the solvent was distilled off under reduced pressure The residual product was purified through silica gel column chromatography

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 0.22 g of dibenzo-18-crown-6-ether and 1.57 g of sodium cyanide were suspended in 20 ml of DMSO, and 5.00 g of 4-tert-butylbenzyl bromide was dropwise added thereto with cooling with water. After having been stirred overnight at room temperature, the resulting mixture was further stirred at 50° C. for 5 hours. After this was left to be at room temperature, water was added thereto and extracted with ether. The organic layer was washed with water, and dried over sodium sulfate, and the solvent was distilled off under reduced pressure. The residual product was purified through silica gel column chromatography to obtain 1.19 g of 4-tert-butylphenylacetonitrile was obtained from the fraction eluted with n-hexane:ethyl acetate 5:1. the resulting mixture was further stirred at 50° C. for 5 hours After this was left to be at room temperature extracted with ether The organic layer was washed with water dried over sodium sulfate the solvent was distilled off under reduced pressure The residual product was purified through silica gel column chromatography

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 0.22 g of dibenzo-18-crown-6-ether and 1.57 g of sodium cyanide were suspended in 20 ml of DMSO, and 5.00 g of 4-tert-butylbenzyl bromide was dropwise added thereto with cooling with water. After having been stirred overnight at room temperature, the resulting mixture was further stirred at 50° C. for 5 hours. After this was left to be at room temperature, water was added thereto and extracted with ether. The organic layer was washed with water, and dried over sodium sulfate, and the solvent was distilled off under reduced pressure. The residual product was purified through silica gel column chromatography to obtain 1.19 g of 4-tert-butylphenylacetonitrile was obtained from the fraction eluted with n-hexane:ethyl acetate 5:1. the resulting mixture was further stirred at 50° C. for 5 hours After this was left to be at room temperature extracted with ether The organic layer was washed with water dried over sodium sulfate the solvent was distilled off under reduced pressure The residual product was purified through silica gel column chromatography

反应条件: temp:92.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 10 L-reaction flask equipped with a rectification column and a separating tank, 314 g (1.81 mol) of 4-tert-butylphenylacetonitrile, 274 g (1.65 mol) of 1,3,4-trimethylpyrazol-5-carboxylic acid methyl ester, 3000 g of heptane, 225 g of diethylene-glycol dimethyl ether, and 99 g of diethylene glycol monoethyl ether were added, the atmosphere was substituted with nitrogen, then azeotropic dehydration was carried out by heating at 90 to 95° C. for 1 hour. The temperature was maintained, 381 g (1.98 mol) of 28% sodium methoxide methanol solution was added dropwise over 13 hours, and the resulting mixture was further reacted for 10 hours. During this reaction, it is continued to remove alcohol separated in the phase under the heptane phase in the separating tank. After cooling to 30° C. or less, 3000 g of water was added to separate out heptane phase, and the resulting aqueous phase was further washed with 600 g of heptane to separate out heptane phase. A quantitative analysis of the obtained aqueous phase with liquid chromatography showed that the aqueous phase contained 486 g (yield 95.5%) of 2-(4-tert-butylphenyl)-3-(1,3,4-trimethyl-5-pyrazolyl)-3-oxopropionitrile. To the aqueous phase, 206 g (1.98 mol) of 35% hydrochloric acid was gradually added dropwise to be neutralized. After stirring for 1 hour, separated crystal was filtered, washed with 300 g of water, and then dried to obtain 475 g (yield 93.4%) of 3-oxo-2-(4-tert-butylphenyl)-3-(1,3,4-trimethylpyrazol-5-yl) propionitrile. In a 10 L-reaction flask equipped with a rectification column The temperature was maintained the resulting mixture was further reacted for 10 hours During this reaction, it to remove alcohol separated in the phase under the heptane phase in the separating tank After cooling to 30° C. or less 3000 g of water was added to separate out heptane phase the resulting aqueous phase was further washed with 600 g of heptane to separate out heptane phase

反应条件: temp:92.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 10 L-reaction flask equipped with a rectification column and a separating tank, 314 g (1.81 mol) of 4-tert-butylphenylacetonitrile, 274 g (1.65 mol) of 1,3,4-trimethylpyrazol-5-carboxylic acid methyl ester, 3000 g of heptane, 225 g of diethylene-glycol dimethyl ether, and 99 g of diethylene glycol monoethyl ether were added, the atmosphere was substituted with nitrogen, then azeotropic dehydration was carried out by heating at 90 to 95° C. for 1 hour. The temperature was maintained, 381 g (1.98 mol) of 28% sodium methoxide methanol solution was added dropwise over 13 hours, and the resulting mixture was further reacted for 10 hours. During this reaction, it is continued to remove alcohol separated in the phase under the heptane phase in the separating tank. After cooling to 30° C. or less, 3000 g of water was added to separate out heptane phase, and the resulting aqueous phase was further washed with 600 g of heptane to separate out heptane phase. A quantitative analysis of the obtained aqueous phase with liquid chromatography showed that the aqueous phase contained 486 g (yield 95.5%) of 2-(4-tert-butylphenyl)-3-(1,3,4-trimethyl-5-pyrazolyl)-3-oxopropionitrile. To the aqueous phase, 206 g (1.98 mol) of 35% hydrochloric acid was gradually added dropwise to be neutralized. After stirring for 1 hour, separated crystal was filtered, washed with 300 g of water, and then dried to obtain 475 g (yield 93.4%) of 3-oxo-2-(4-tert-butylphenyl)-3-(1,3,4-trimethylpyrazol-5-yl) propionitrile. In a 10 L-reaction flask equipped with a rectification column The temperature was maintained the resulting mixture was further reacted for 10 hours During this reaction, it to remove alcohol separated in the phase under the heptane phase in the separating tank After cooling to 30° C. or less 3000 g of water was added to separate out heptane phase the resulting aqueous phase was further washed with 600 g of heptane to separate out heptane phase

反应条件: temp:92.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 10 L-reaction flask equipped with a rectification column and a separating tank, 314 g (1.81 mol) of 4-tert-butylphenylacetonitrile, 300 g (1.65 mol) of 1,3,4-trimethylpyrazol-5-carboxylic acid ethyl ester, 3000 g of heptane, 225 g of diethylene glycol dimethyl ether, and 99 g of diethylene glycol monoethyl ether were added, the atmosphere was substituted with nitrogen, then azeotropic dehydration was carried out by heating at 90 to 95° C. for 1 hour. The temperature was maintained, 381 g (1.98 mol) of 28% sodium methoxide methanol solution was added dropwise over 10 hours, and the resulting mixture was further reacted for 10 hours. During this reaction, it is continued to remove alcohol separated in the phase under the heptane phase in the separating tank. After cooling to 30° C. or less, 3000 g of water was added to separate out heptane phase, and the resulting aqueous phase was washed with 600 g of heptane to separate out heptane phase. A quantitative analysis of the obtained aqueous phase with liquid chromatography showed that the aqueous phase contained 478 g (yield 94.0%) of 2-(4-tert-butylphenyl)-3-(1,3,4-trimethyl-5-pyrazolyl)-3-oxopropionitrile. To the aqueous phase, 206 g (1.98 mol) of 35% hydrochloric acid was gradually added dropwise to be neutralized. After stirring for 1 hour, separated crystal was filtered, washed with 300 g of water, and then dried to obtain 469 g (yield 92.0%) of 3-oxo-2-(4-tert-butyl phenyl)-3-(1,3,4-trimethylpyrazol-5-yl) propionitrile. In a 10 L-reaction flask equipped with a rectification column The temperature was maintained the resulting mixture was further reacted for 10 hours During this reaction, it to remove alcohol separated in the phase under the heptane phase in the separating tank After cooling to 30° C. or less 3000 g of water was added to separate out heptane phase the resulting aqueous phase was washed with 600 g of heptane to separate out heptane phase