反应 #3859429
相关文献 (1)
openreactiondata ↗doi:10.1039/C8SC04228D
反应条件: temp:0.00; pressure:0.00; stir:
来源 ID: ord-e23519b4982447d2b1161c019315d402暂无可渲染的结构数据
CCCCCCC1=CC=C(C=C1)N产品信息
4-己基苯胺(CAS 33228-45-4)的产品身份、结构标识及相关反应资料,供化学中间体检索、研发和采购评估使用。
可能的应用方向
仅供专业研发与工业用途
数据库编号 36382
安全提示
仅供专业研发与工业用途。操作前请依据供应商提供的安全数据表完成风险评估。
合成路线数据
12 条反应 · 12 篇文献
反应条件: temp:0.00; pressure:0.00; stir:
来源 ID: ord-e23519b4982447d2b1161c019315d402反应条件: temp:0.00; pressure:0.00; stir:
来源 ID: ord-3f2be73161fb4bf3a5e4933a54b71306反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: 1.7 g of 3-n-hexylisoxazol-5(4H)-one (prepared in accordance with Example 3) are dissolved in 10 ml of triethyl orthoformate and heated at 80° C. for 2 hours together with 2.65 g of p-hexylaniline. The dark reaction solution is concentrated and recrystallized in 100 ml of hexane. 1.8 g (50% of theory) of the above-named crystalline compound are obtained. M.p. 88°-90° C., UV (EtOH): 356 nm (ε=26469). This compound is especially suitable as a UV A filter. The dark reaction solution is concentrated recrystallized in 100 ml of hexane 1.8 g (50% of theory) of the above-named crystalline compound are obtained
来源 ID: ord-f60b3bc5235047e99151116771104e08反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: In a 2 liter-reaction vessel, 50.0 g (0.28 M) of p-hexylaniline, 54.8 g (0.56 M) of potassium thiocyanate and 400 ml of acetic acid were placed and cooled below 10° C. To the mixture, a solution of 45.0 g of bromine in 135 ml of acetic acid was added dropwise in 40 minutes below 10° C. under strong stirring, followed by reaction for 1.5 hours below 10° C. After the reaction, 500 ml of water was poured into the reaction mixture, followed by heating to dissolve the resultant precipitate. The resultant solution was filtered under heating. Ammonia water was added to the filtrate until the resultant solution became basic, followed by cooling with ice to precipitate a crystal. The crystal was recovered by filtration, followed by washing and drying to obtain a crude product. The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1) to obtain 33.0 g of 2-amino-6-hexylbenzothiazole (Yield: 49.9%). cooled below 10° C followed by reaction for 1.5 hours below 10° C was poured into the reaction mixture by heating The resultant solution was filtered under heating Ammonia water was added to the filtrate until the resultant solution by cooling with ice to precipitate a crystal The crystal was recovered by filtration by washing drying to obtain a crude product The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1)
来源 ID: ord-29209cefe7c3408dbf54b100600db0b3反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: In a 2 liter-reaction vessel, 50.0 g (0.28M) of p-hexylaniline, 54.8 g (0.56M) of potassium thiocyanate and 400 ml of acetic acid were placed and cooled below 10° C. To the mixture, a solution of 45.0 g of bromine in 135 ml of acetic acid was added dropwise in 40 minutes below 10° C. under strong stirring, followed by reaction for 1.5 hours below 10° C. After the reaction, 500 ml of water was poured into the reaction mixture, followed by heating to dissolve the resultant precipitate. The resultant solution was filtered under heating. Ammonia water was added to the filtrate until the resultant solution became basic, followed by cooling with ice to precipitate a crystal. The crystal was recovered by filtration, followed by washing and drying to obtain a crude product. The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1) to obtain 33.0 g of 2-amino-6-hexylbenzothiazole (Yield: 49.9 %). cooled below 10° C followed by reaction for 1.5 hours below 10° C was poured into the reaction mixture by heating The resultant solution was filtered under heating Ammonia water was added to the filtrate until the resultant solution by cooling with ice to precipitate a crystal The crystal was recovered by filtration by washing drying to obtain a crude product The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1)
来源 ID: ord-6b9f2fcee88d4e1ba4fbb7f1d17b4c32反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: In a 2 liter-reaction vessel, 50.0 g (0.28M) of p-hexylaniline, 54.8 g (0.56M) of potassium thiocyanate and 400 ml of acetic acid were placed and cooled below 10° C. To the mixture, a solution of 45.0 g of bromine in 135 ml of acetic acid was added dropwise in 40 minutes below 10° C. under strong stirring, followed by reaction for 1.5 hours below 10° C. After the reaction, 500 ml of water was poured into the reaction mixture, followed by heating to dissolve the resultant precipitate. The resultant solution was filtered under heating. Ammonia water was added to the filtrate until the resultant solution became basic, followed by cooling with ice to precipitate a crystal. The crystal was recovered by filtration, followed by washing and drying to obtain a crude product. The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1) to obtain 33.0 g of 2-amino-6-hexylbenzothiazole (Yield: 49.9 %). cooled below 10° C followed by reaction for 1.5 hours below 10° C was poured into the reaction mixture by heating The resultant solution was filtered under heating Ammonia water was added to the filtrate until the resultant solution by cooling with ice to precipitate a crystal The crystal was recovered by filtration by washing drying to obtain a crude product The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1)
来源 ID: ord-6b9f2fcee88d4e1ba4fbb7f1d17b4c32反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: 30.1 g (0.17 M) of 4-hexylaniline was cooled to 0° C. or below, 85 gof 10% aqueous hydrochloric acid solution was added, and then a solution of11.6 g of sodium nitrite in 68 g of water was added. During the addition, the mixture was cooled so as not to exceed 0° C. After the addition, the mixture was allowed to react for 30 minutes, transferred into a dropping funnel and added dropwise into 170 g of an 8% NaOH aqueoussolution containing 16 g of phenol held at 5° C. or below. After theaddition, the mixture was stirred for 0.5 hour, and then 10% hydrochloric acid aqueous solution was added thereto until a pH of 5-6 to precipitate the reaction product. The precipitate was separated by filtration, washed with water and dried overnight under reduced pressure. After the drying, the product was washed with 500 ml of petroleum ether and further dried under reduced pressure to obtain 29.6 g (0.10M) of 4-hydroxy-4'-hexylazobenzene. The yield was 59%. During the addition the mixture was cooled so as not to exceed 0° C After the addition to react for 30 minutes transferred into a dropping funnel held at 5° C. or below until a pH of 5-6 to precipitate the reaction product The precipitate was separated by filtration washed with water dried overnight under reduced pressure After the drying, the product was washed with 500 ml of petroleum ether further dried under reduced pressure
来源 ID: ord-e136669893644a538cc9a539a116c1bd反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: 1.7 g of 3-n-hexylisoxazol-5(4H)-one (prepared in accordance with Example 3) are dissolved in 10 ml of triethyl orthoformate and heated at 80° C. for 2 hours together with 2.65 g of p-hexylaniline. The dark reaction solution is concentrated and recrystallized in 100 ml of hexane. 1.8 g (50% of theory) of the above-named crystalline compound are obtained. M.p. 88°-90° C., UV (EtOH): 356 nm (ε=26469). This compound is especially suitable as a UV A filter. The dark reaction solution is concentrated recrystallized in 100 ml of hexane 1.8 g (50% of theory) of the above-named crystalline compound are obtained
来源 ID: ord-f60b3bc5235047e99151116771104e08反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: In a 2 liter-reaction vessel, 50.0 g (0.28 M) of p-hexylaniline, 54.8 g (0.56 M) of potassium thiocyanate and 400 ml of acetic acid were placed and cooled below 10° C. To the mixture, a solution of 45.0 g of bromine in 135 ml of acetic acid was added dropwise in 40 minutes below 10° C. under strong stirring, followed by reaction for 1.5 hours below 10° C. After the reaction, 500 ml of water was poured into the reaction mixture, followed by heating to dissolve the resultant precipitate. The resultant solution was filtered under heating. Ammonia water was added to the filtrate until the resultant solution became basic, followed by cooling with ice to precipitate a crystal. The crystal was recovered by filtration, followed by washing and drying to obtain a crude product. The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1) to obtain 33.0 g of 2-amino-6-hexylbenzothiazole (Yield: 49.9%). cooled below 10° C followed by reaction for 1.5 hours below 10° C was poured into the reaction mixture by heating The resultant solution was filtered under heating Ammonia water was added to the filtrate until the resultant solution by cooling with ice to precipitate a crystal The crystal was recovered by filtration by washing drying to obtain a crude product The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1)
来源 ID: ord-29209cefe7c3408dbf54b100600db0b3反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: In a 2 liter-reaction vessel, 50.0 g (0.28 M) of p-hexylaniline, 54.8 g (0.56 M) of potassium thiocyanate and 400 ml of acetic acid were placed and cooled below 10° C. To the mixture, a solution of 45.0 g of bromine in 135 ml of acetic acid was added dropwise in 40 minutes below 10° C. under strong stirring, followed by reaction for 1.5 hours below 10° C. After the reaction, 500 ml of water was poured into the reaction mixture, followed by heating to dissolve the resultant precipitate. The resultant solution was filtered under heating. Ammonia water was added to the filtrate until the resultant solution became basic, followed by cooling with ice to precipitate a crystal. The crystal was recovered by filtration, followed by washing and drying to obtain a crude product. The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1) to obtain 33.0 g of 2-amino-6-hexylbenzothiazole (Yield: 49.9%). cooled below 10° C followed by reaction for 1.5 hours below 10° C was poured into the reaction mixture by heating The resultant solution was filtered under heating Ammonia water was added to the filtrate until the resultant solution by cooling with ice to precipitate a crystal The crystal was recovered by filtration by washing drying to obtain a crude product The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1)
来源 ID: ord-29209cefe7c3408dbf54b100600db0b3反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.
实验步骤: In a 2 liter-reaction vessel, 50.0 g (0.28M) of p-hexylaniline, 54.8 g (0.56M) of potassium thiocyanate and 400 ml of acetic acid were placed and cooled below 10° C. To the mixture, a solution of 45.0 g of bromine in 135 ml of acetic acid was added dropwise in 40 minutes below 10° C. under strong stirring, followed by reaction for 1.5 hours below 10° C. After the reaction, 500 ml of water was poured into the reaction mixture, followed by heating to dissolve the resultant precipitate. The resultant solution was filtered under heating. Ammonia water was added to the filtrate until the resultant solution became basic, followed by cooling with ice to precipitate a crystal. The crystal was recovered by filtration, followed by washing and drying to obtain a crude product. The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1) to obtain 33.0 g of 2-amino-6-hexylbenzothiazole (Yield: 49.9 %). cooled below 10° C followed by reaction for 1.5 hours below 10° C was poured into the reaction mixture by heating The resultant solution was filtered under heating Ammonia water was added to the filtrate until the resultant solution by cooling with ice to precipitate a crystal The crystal was recovered by filtration by washing drying to obtain a crude product The crude product was recrystallized from a mixture solvent of n-hexane/benzene (1/1)
来源 ID: ord-6b9f2fcee88d4e1ba4fbb7f1d17b4c32反应条件: temp:0.00; pressure:0.00; stir:
来源 ID: ord-e23519b4982447d2b1161c019315d402PubChem References
以下资料来自该化合物的公开数据库参考记录。
相关产品
10 related records
CAS 37529-27-4
CAS 104-13-2
CAS 79038-66-7
CAS 104-42-7
CAS 91323-12-5
CAS 621-95-4
CAS 37529-30-9
CAS 2696-84-6
CAS 33228-44-3
CAS 13024-49-2
