1-溴-4-(三氟甲基硫代)苯

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Meta-Chloroperbenzoic acid (1.2 g, 11.7 mmol) was added to a solution of (4-bromophenyl)(trifluoromethyl)sulfane (1.7 g, 6.61 mmol) in dichloromethane (30 mL). After stirring at rt for 12 h, the reaction mixture was poured into ice-water and extracted with EtOAc (3×60 mL). The combined organic layers were dried (MgSO4), concentrated, and purified by column chromatography on silica gel (EtOAc/petroleum ether=0:100 to 1:50) to give 859 mg of 1-bromo-4-((trifluoromethyl)sulfinyl)benzene as a white solid. 1H NMR (CDCl3, 400 MHz): δ 7.79-7.75 (m, 2H), 7.66 (d, 2H). 13C NMR (CDCl3, 100 MHz): δ 134.8, 133.0, 128.7, 127.4, 124.4 (q, J=330 Hz). extracted with EtOAc (3×60 mL) The combined organic layers were dried (MgSO4) concentrated purified by column chromatography on silica gel (EtOAc/petroleum ether=0:100 to 1:50)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Chromium trioxide (1.2 g, 11.7 mmol) was added to a solution of (4-bromophenyl)(trifluoromethyl)sulfane (1.5 g, 5.83 mmol), concentrated H2SO4 (6 mL), and H2O (10 mL). After stirring at rt for 2 h, the reaction mixture was poured into ice-water and extracted with EtOAc (3×60 mL). The combined organic layers were dried (MgSO4), concentrated, and purified by column chromatography on silica gel (EtOAc/petroleum ether=1:100) to give 960 mg of 1-bromo-4-((trifluoromethyl)sulfonyl)benzene as a white solid. 1H NMR (CDCl3, 400 MHz): δ 7.89 (d, 2H), 7.85-7.81 (m, 2H). 13C NMR (CDCl3, 100 MHz): δ 133.4, 132.8, 132.1, 130.4, 119.7 (q, J=320 Hz). extracted with EtOAc (3×60 mL) The combined organic layers were dried (MgSO4) concentrated purified by column chromatography on silica gel (EtOAc/petroleum ether=1:100)

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a degassed solution of 1-bromo-4-(trifluoromethylsulfanyl)benzene (4.8 g, 18.7 mmol) in tetrahydrofuran (40 mL) was added in the following order: copper(I) iodide (106 mg, 0.56 mmol), tetrakis(triphenylphosphine)palladium (647 mg, 0.56 mmol) and 1,8-diazabicyclo[5.4.0]undec-7-ene (3.36 mL, 22.3 mmol). The resulting mixture was degassed one more time and a solution of propargyl alcohol (1.30 mL, 22.3 mmol) in tetrahydrofuran (5 mL) was added over period of 10 min. The reaction mixture was slowly heated up to 50° C. and then stirred at this temperature for 6 h and then left to stand at ambient temperature over night. The mixture was diluted with ether (50 mL) and acidified with 5% hydrochloric acid to pH 2. Ethereal solution was washed with water (2×15 mL), saturated solution of sodium hydrogen carbonate (15 mL) and brine (15 mL), dried with anhydrous magnesium sulfate and evaporated in vacuo. The residue was purified by column chromatography (silica gel Fluka 60, hexanes/ethyl acetate 85:15) affording 3-[4-(trifluoromethylsulfanyl)phenyl]prop-2-yn-1-ol. The resulting mixture was degassed one more time left to stand at ambient temperature over night Ethereal solution was washed with water (2×15 mL), saturated solution of sodium hydrogen carbonate (15 mL) and brine (15 mL) dried with anhydrous magnesium sulfate evaporated in vacuo The residue was purified by column chromatography (silica gel Fluka 60, hexanes/ethyl acetate 85:15)

反应条件: temp:75.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A multinecked flask as described in Example 1 was charged with 5.4 g (0.021 mol) of p-bromophenyl trifluoromethyl sulfide, 75 ml of dried, degassed triethylamine, 2.46 g (0.021 mol) of 3-aminophenylacetylene, 0.048 g (0.068 mmol) of bis(triphenylphosphine) palladium II chloride, 0.0148 g (0.564 mmol) of triphenylphosphine, and 0.03 g (0.157 mmol) of cuprous iodide. The reaction mixture was heated at 75° C. for 20 hours after which gas chromatography showed the reaction to be complete. The mixture was cooled to room temperature and diluted with 75 ml of ether. Filtration of the insoluble triethylamine hydrobromide salt by-product followed by concentration of the filtrate gave the crude product in near quantitative yield as an off-white solid. Short path distillation of the crude product under reduced pressure gave 3.9 g (0.013 mol, 62% yield) of the purified product as a white solid. A multinecked flask as described in Example 1 of dried the reaction The mixture was cooled to room temperature Filtration of the insoluble triethylamine hydrobromide salt by-product gave the crude product in near quantitative yield as an off-white solid Short path distillation of the crude product under reduced pressure

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a degassed solution of 1-bromo-4-(trifluoromethylsulfanyl)benzene (4.8 g, 18.7 mmol) in tetrahydrofuran (40 mL) was added in the following order: copper(I) iodide (106 mg, 0.56 mmol), tetrakis(triphenylphosphine)palladium (647 mg, 0.56 mmol) and 1,8-diazabicyclo[5.4.0]undec-7-ene (3.36 mL, 22.3 mmol). The resulting mixture was degassed one more time and a solution of propargyl alcohol (1.30 mL, 22.3 mmol) in tetrahydrofuran (5 mL) was added over period of 10 min. The reaction mixture was slowly heated up to 50° C. and then stirred at this temperature for 6 h and then left to stand at ambient temperature over night. The mixture was diluted with ether (50 mL) and acidified with 5% hydrochloric acid to pH 2. Ethereal solution was washed with water (2×15 mL), saturated solution of sodium hydrogen carbonate (15 mL) and brine (15 mL), dried with anhydrous magnesium sulfate and evaporated in vacuo. The residue was purified by column chromatography (silica gel Fluka 60, hexanes/ethyl acetate 85:15) affording 3-[4-(trifluoromethylsulfanyl)phenyl]prop-2-yn-1-ol. The resulting mixture was degassed one more time left to stand at ambient temperature over night Ethereal solution was washed with water (2×15 mL), saturated solution of sodium hydrogen carbonate (15 mL) and brine (15 mL) dried with anhydrous magnesium sulfate evaporated in vacuo The residue was purified by column chromatography (silica gel Fluka 60, hexanes/ethyl acetate 85:15)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Tris(dibenzylideneacetone)dipalladium (13 mg; 0.01 mmol), 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (26 mg; 0.04 mmol), sodium tert-butoxide (120 mg; 1.20 mmol), 1-bromo-4-trifluoromethylsulfanyl-benzene (160 mg; 0.62 mmol) and N-piperidin-4-yl-4-[4-(4-trifluoromethyl-phenyl)-piperazin-1-yl]-butyramide (300 mg; 0.75 mmol, prepared in accordance with Example 75) are suspended in dry toluene (10 mL) and the mixture is irradiated in a mono-mode microwave oven for 90 minutes at 120° C. The mixture is then cooled down to room temperature, is diluted with ethyl acetate (50 mL), is filtered and the filtrate is concentrated under reduced pressure. The crude residue is then purified by column chromatography on silica gel (dichloromethane:isopropyl alcohol 9:1) to afford the desired product (155 mg; 0.27 mmol). The structure was confirmed using Protocol I-B. Calculated mass=575; observed mass=575; HPLC retention time=5.26 min. the mixture is irradiated in a mono-mode microwave oven for 90 minutes at 120° C is filtered the filtrate is concentrated under reduced pressure The crude residue is then purified by column chromatography on silica gel (dichloromethane:isopropyl alcohol 9:1)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Tris(dibenzylideneacetone)dipalladium (13 mg; 0.01 mmol), 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (26 mg; 0.04 mmol), sodium tert-butoxide (120 mg; 1.20 mmol), 1-bromo-4-trifluoromethylsulfanyl-benzene (160 mg; 0.62 mmol) and N-piperidin-4-yl-4-[4-(4-trifluoromethyl-phenyl)-piperazin-1-yl]-butyramide (300 mg; 0.75 mmol, prepared in accordance with Example 75) are suspended in dry toluene (10 mL) and the mixture is irradiated in a mono-mode microwave oven for 90 minutes at 120° C. The mixture is then cooled down to room temperature, is diluted with ethyl acetate (50 mL), is filtered and the filtrate is concentrated under reduced pressure. The crude residue is then purified by column chromatography on silica gel (dichloromethane:isopropyl alcohol 9:1) to afford the desired product (155 mg; 0.27 mmol). The structure was confirmed using Protocol I-B. Calculated mass=575; observed mass=575; HPLC retention time=5.26 min. the mixture is irradiated in a mono-mode microwave oven for 90 minutes at 120° C is filtered the filtrate is concentrated under reduced pressure The crude residue is then purified by column chromatography on silica gel (dichloromethane:isopropyl alcohol 9:1)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Tris(dibenzylideneacetone)dipalladium (23 mg; 0.03 mmol), 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (46 mg; 0.07 mmol), sodium tert-butoxide (176 mg; 1.83 mmol), 1-bromo-4-trifluoromethylsulfanyl-benzene (314 mg; 1.22 mmol) and 4-amino-piperidine-1-carboxylic acid tert-butyl ester (302 mg; 1.51 mmol) are suspended in dry toluene (5 mL) and the mixture is irradiated in a mono-mode microwave oven for 20 minutes at 120° C. The mixture is then cooled down to room temperature, is diluted with ethyl acetate (15 mL), filtered and concentrated under reduced pressure. The crude residue is then diluted in dichloromethane (15 mL) and filtered over a short silica gel pad. The desired product is eluted from the silica gel pad with dichloromethane and the fractions of interest are concentred under reduced pressure to afford the desired product (220 mg; 0.59 mmol). the mixture is irradiated in a mono-mode microwave oven for 20 minutes at 120° C filtered concentrated under reduced pressure The crude residue is then diluted in dichloromethane (15 mL) filtered over a short silica gel pad The desired product is eluted from the silica gel pad with dichloromethane

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Tris(dibenzylideneacetone)dipalladium (23 mg; 0.03 mmol), 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (46 mg; 0.07 mmol), sodium tert-butoxide (176 mg; 1.83 mmol), 1-bromo-4-trifluoromethylsulfanyl-benzene (314 mg; 1.22 mmol) and 4-amino-piperidine-1-carboxylic acid tert-butyl ester (302 mg; 1.51 mmol) are suspended in dry toluene (5 mL) and the mixture is irradiated in a mono-mode microwave oven for 20 minutes at 120° C. The mixture is then cooled down to room temperature, is diluted with ethyl acetate (15 mL), filtered and concentrated under reduced pressure. The crude residue is then diluted in dichloromethane (15 mL) and filtered over a short silica gel pad. The desired product is eluted from the silica gel pad with dichloromethane and the fractions of interest are concentred under reduced pressure to afford the desired product (220 mg; 0.59 mmol). the mixture is irradiated in a mono-mode microwave oven for 20 minutes at 120° C filtered concentrated under reduced pressure The crude residue is then diluted in dichloromethane (15 mL) filtered over a short silica gel pad The desired product is eluted from the silica gel pad with dichloromethane

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a degassed solution of 1-bromo-4-(trifluoromethylsulfanyl)benzene (4.8 g, 18.7 mmol) in tetrahydrofuran (40 mL) was added in the following order: copper(I) iodide (106 mg, 0.56 mmol), tetrakis(triphenylphosphine)palladium (647 mg, 0.56 mmol) and 1,8-diazabicyclo[5.4.0]undec-7-ene (3.36 mL, 22.3 mmol). The resulting mixture was degassed one more time and a solution of propargyl alcohol (1.30 mL, 22.3 mmol) in tetrahydrofuran (5 mL) was added over period of 10 min. The reaction mixture was slowly heated up to 50° C. and then stirred at this temperature for 6 h and then left to stand at ambient temperature over night. The mixture was diluted with ether (50 mL) and acidified with 5% hydrochloric acid to pH 2. Ethereal solution was washed with water (2×15 mL), saturated solution of sodium hydrogen carbonate (15 mL) and brine (15 mL), dried with anhydrous magnesium sulfate and evaporated in vacuo. The residue was purified by column chromatography (silica gel Fluka 60, hexanes/ethyl acetate 85:15) affording 3-[4-(trifluoromethylsulfanyl)phenyl]prop-2-yn-1-ol. The resulting mixture was degassed one more time left to stand at ambient temperature over night Ethereal solution was washed with water (2×15 mL), saturated solution of sodium hydrogen carbonate (15 mL) and brine (15 mL) dried with anhydrous magnesium sulfate evaporated in vacuo The residue was purified by column chromatography (silica gel Fluka 60, hexanes/ethyl acetate 85:15)