七氟丁酰氟

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The following run illustrates the metathetical reaction of impure heptafluorobutyryl fluoride with butyric acid in the presence of butyric anhydride to give heptafluorobutyric acid and butyryl fluoride and the recovery of products from the reaction mixture by fractional distillation.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The following run illustrates the metathetical reaction of impure heptafluorobutyryl fluoride with butyric acid in the presence of butyric anhydride to give heptafluorobutyric acid and butyryl fluoride and the recovery of products from the reaction mixture by fractional distillation.

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of CF2═CFCF3 (hexafluoropropylene) was added at a pressure of 85 psig (5150 torr) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gcms. Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of CF2═CFCF3 (hexafluoropropylene) was added at a pressure of 85 psig (5150 torr) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gcms. Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of CF2═CFCF3 (hexafluoropropylene) was added at a pressure of 85 psig (5150 torr) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gcms. Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of CF2═CFCF3 (hexafluoropropylene) was added at a pressure of 85 psig (5150 torr) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gcms. Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The following run illustrates the metathetical reaction of impure heptafluorobutyryl fluoride with butyric acid in the presence of butyric anhydride to give heptafluorobutyric acid and butyryl fluoride and the recovery of products from the reaction mixture by fractional distillation.

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of CF2═CFCF3 (hexafluoropropylene) was added at a pressure of 85 psig (5150 torr absolute) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr absolute). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr absolute) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gcms. Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr absolute) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of CF2═CFCF3 (hexafluoropropylene) was added at a pressure of 85 psig (5150 torr absolute) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr absolute). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr absolute) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gcms. Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr absolute) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (available from 3M Co., approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of hexafluoropropylene was added at a pressure of 85 psig (5150 torr) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gas chromatography and mass spectroscopy. Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a clean dry 600 mL Parr reactor equipped with stirrer, heater and thermocouple were added 5.8 g (0.10 mol) of anhydrous potassium fluoride and 108 g of anhydrous diglyme. The contents of the reactor were stirred and cooled with dry ice while 232.5 g (1.02 mol) of n-C3F7COF (available from 3M Co., approximately 95.0 percent purity) was added to the sealed reactor. The reactor and its contents were then heated, and when a temperature of 72° C. had been reached, 141 g (0.94 mol) of hexafluoropropylene was added at a pressure of 85 psig (5150 torr) over a 3.25 hour time period. During the addition of hexafluoropropylene the temperature of the reactor was increased slowly to 85° C. while maintaining the pressure at less than 90 psig (5400 torr). The pressure at the end of the hexafluoropropylene addition was 40 psig (2800 torr) and did not change over an additional 4-hour hold period. The lower phase was fractionally distilled to give 243.5 grams of 1,1,1,2,4,4,5,5,6,6,6-undecafluoro-2-trifluoromethylhexan-3-one, having a boiling point of 72.5° C. and a purity of 99.9% as determined by gas chromatography. The structure was confirmed by gas chromatography and mass spectrometry (GCMS). Into a clean dry 600 mL Parr reactor equipped with stirrer was added to the sealed reactor The reactor and its contents were then heated a temperature of 72° C. while maintaining the pressure at less than 90 psig (5400 torr) did not change over an additional 4-hour hold period The lower phase was fractionally distilled

反应条件: temp:5.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of dry potassium fluoride (7.50 g, 0.13 mol), diglyme (100 ml) and heptafluorobutyroyl fluoride (prepared from the acid by treatment with sulfur tetrafluoride) (28.1 g, 0.13 mol) was stirred at 5° C. for 30 min. Perfluoroallyl fluorosulfate was added dropwise at 5° C., the mixture was stirred at this temperature for 1 hour, then at 25° C. for 3 hours. The volatile components were transferred by distillation at 40° C. (8 mm Hg), washed with water (100 ml), and distilled from a small amount of concentrated sulfuric acid to give perfluoro-3-(butoxy)propene (30.3 g, 0.083 mol, 64%) bp 80°-84° C. whose structure was confirmed by: λmax 5.57 (CF=CF2) and 7.2-9.5 μm (C--F,C--O); 19F NMR -72.1 (d J=25.2 Hz, each member t J=13.5 Hz, d J=13.5 Hz, d J=7.4 Hz) 2F, OCF2C=C, -82.1 (t J=8.1 Hz, each member m), 3F, CF3, -84.5 (m) 2F, CF2O, -92.1 (d J=52.3 Hz, each member d J=39.4 Hz, t J=7.4 Hz) 1F, cis-CF2CF=CF, -105.5 (d J=117.5 Hz, each member d J=52.3 Hz, t J=25.2 Hz) 1F, trans-CF2CF=CF, -127.3 (m) 4F, CF2, and -191.0 ppm (d J=117.5 Hz, each member d J=39.4 Hz, t J=13.7 Hz, m) 1F, CF2CF=C. the mixture was stirred at this temperature for 1 hour at 25° C. for 3 hours The volatile components were transferred by distillation at 40° C. (8 mm Hg) washed with water (100 ml) distilled from a small amount of concentrated sulfuric acid