2.6-二甲基-4-甲氧基苯硼酸

反应条件: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A flame-dried sealable Schlenk tube was charged with 4-bromo-3,5-dimethyl-pyridine 1-oxide (1; 10.1 g, 50.0 mmol), 2 (18.0 g, 100 mmol), Pd2(dba)3 (0.915 g, 1.00 mmol), dicyclohexyl-(2-phenanthren-9-yl-phenyl)-phosphane (1.8 g, 4.0 mmol), and K3PO4 (31.9 g, 150 mmol). The Schlenk tube was next evacuated and backfilled with N2. Then, degassed dry toluene (100 mL) was added via syringe under N2. The Schlenk tube was sealed, and the mixture was stirred at 120° C. for 48 h. The reaction mixture was subsequently cooled to room temperature, diluted with methylene chloride (500 mL), filtered, and concentrated in vacuo. The resulting dark brown oil was allowed to stand at room temperature until the colorless crystalline product separated from the liquid. The solid was then collected by filtration and identified as the pure title compound (6.55 g). The filtrate was purified by flash chromatography eluting with 95:5 CHCl3: methanol to afford an additional 0.23 g of the title compound. The combined yield was 6.78 g (53%): mp 194-195° C.; 1H NMR (400 MHz, CD2Cl2): δ 7.990 (s, 2H), 6.705 (s, 2H), 3.798 (s, 3H), 1.892 (s, 6H), 1.842 (s, 6H); 13C NMR (125 MHz, CD2Cl2): δ 159.771, 139.578, 137.663, 137.187, 135.775, 128.289, 113.709, 55.605, 20.198, 17.087; MS (ESI): m/z 258.4 [(M+H)+, 100]; Anal. Calcd. For C16H19NO2: C, 74.68; H, 7.44; N, 5.44. Found: C, 74.54; H, 7.40; N, 5.51. The Schlenk tube was next evacuated Then, degassed dry toluene (100 mL) was added via syringe under N2 The Schlenk tube was sealed The reaction mixture was subsequently cooled to room temperature diluted with methylene chloride (500 mL) filtered concentrated in vacuo to stand at room temperature until the colorless crystalline product separated from the liquid The solid was then collected by filtration The filtrate was purified by flash chromatography eluting with 95:5 CHCl3

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: An oven-dried three-neck round-bottom flask equipped with two rubber septum-sealed addition funnels and a sidearm stopcock was evacuated and backfilled with N2. Dry THF (100 mL) and 2-bromo-5-methoxy-1,3-dimethyl-benzene (21.5 g, 0.100 mol) were then added via syringe. The mixture was then cooled to −78° C. with stirring in a dry ice-acetone bath. Next, n-butyl lithium (2.5 M solution in hexane, 44 mL, 0.11 mol) was added dropwise via syringe with stirring over the course of 45 min at −78° C., and the mixture was allowed to stir at −78° C. for an additional 30 min. Triisopropyl borate (28.2 g, 0.150 mol) was then added dropwise via syringe over the course of 30 min at −78° C. After stirring at −78° C. for an additional 1 h, the mixture was quenched with saturated aqueous NH4Cl solution (100 mL), and the resulting mixture allowed to gradually warm to room temperature. The organic layer was next separated, and the aqueous layer was extracted with a mixture of ethyl acetate and THF (1:1, 50 mL×3). The combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo. The resulting sticky oil was suspended in hexane (100 mL) and stirred at room temperature for 30 min. The resulting solid was collected by filtration and washed with hexane to yield 14.9 g of the title compound as a colorless solid (83%). 1H NMR (400 MHz, CDCl3): δ 6.552 (s, 2H), 4.684 (s, 2H), 3.780 (s, 3H), 2.370 (s, 6H). 13C NMR (100 MHz, CDCl3): δ 141.714, 122.607, 112.325, 111.815, 55.238, 22.663. MS (EI): m/z 180.1 [M+, 100]. Anal. Calcd. For C9H13BO3: C, 60.05; H, 7.28. Found: C, 60.27; H, 7.42. An oven-dried three-neck round-bottom flask equipped with two rubber septum-sealed addition funnels a sidearm stopcock was evacuated with stirring over the course of 45 min at −78° C. to stir at −78° C. for an additional 30 min After stirring at −78° C. for an additional 1 h the mixture was quenched with saturated aqueous NH4Cl solution (100 mL) to gradually warm to room temperature the aqueous layer was extracted with a mixture of ethyl acetate and THF (1:1, 50 mL×3) The combined organic layers were dried over MgSO4 filtered concentrated in vacuo stirred at room temperature for 30 min The resulting solid was collected by filtration washed with hexane

反应条件: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A flame-dried sealable Schlenk tube was charged with 4-bromo-3,5-dimethyl-pyridine 1-oxide (1; 10.1 g, 50.0 mmol), 2 (18.0 g, 100 mmol), Pd2(dba)3 (0.915 g, 1.00 mmol), dicyclohexyl-(2-phenanthren-9-yl-phenyl)-phosphane (1.8 g, 4.0 mmol), and K3PO4 (31.9 g, 150 mmol). The Schlenk tube was next evacuated and backfilled with N2. Then, degassed dry toluene (100 mL) was added via syringe under N2. The Schlenk tube was sealed, and the mixture was stirred at 120° C. for 48 h. The reaction mixture was subsequently cooled to room temperature, diluted with methylene chloride (500 mL), filtered, and concentrated in vacuo. The resulting dark brown oil was allowed to stand at room temperature until the colorless crystalline product separated from the liquid. The solid was then collected by filtration and identified as the pure title compound (6.55 g). The filtrate was purified by flash chromatography eluting with 95:5 CHCl3: methanol to afford an additional 0.23 g of the title compound. The combined yield was 6.78 g (53%): mp 194-195° C.; 1H NMR (400 MHz, CD2Cl2): δ 7.990 (s, 2H), 6.705 (s, 2H), 3.798 (s, 3H), 1.892 (s, 6H), 1.842 (s, 6H); 13C NMR (125 MHz, CD2Cl2): δ 159.771, 139.578, 137.663, 137.187, 135.775, 128.289, 113.709, 55.605, 20.198, 17.087; MS (ESI): m/z 258.4 [(M+H)+,100]; Anal. Calcd. For C16H19NO2: C, 74.68; H, 7.44; N, 5.44. Found: C, 74.54; H, 7.40; N, 5.51. The Schlenk tube was next evacuated Then, degassed dry toluene (100 mL) was added via syringe under N2 The Schlenk tube was sealed The reaction mixture was subsequently cooled to room temperature diluted with methylene chloride (500 mL) filtered concentrated in vacuo to stand at room temperature until the colorless crystalline product separated from the liquid The solid was then collected by filtration The filtrate was purified by flash chromatography eluting with 95:5 CHCl3

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: An oven-dried three-neck round-bottom flask equipped with two rubber septum-sealed addition funnels and a sidearm stopcock was evacuated and backfilled with N2. Dry THF (100 mL) and 2-bromo-5-methoxy-1,3-dimethyl-benzene (21.5 g, 0.100 mol) were then added via syringe. The mixture was then cooled to −78° C. with stirring in a dry ice-acetone bath. Next, n-butyl lithium (2.5 M solution in hexane, 44 mL, 0.11 mol) was added dropwise via syringe with stirring over the course of 45 min at −78° C., and the mixture was allowed to stir at −78° C. for an additional 30 min. Triisopropyl borate (28.2 g, 0.150 mol) was then added dropwise via syringe over the course of 30 min at −78° C. After stirring at −78° C. for an additional 1 h, the mixture was quenched with saturated aqueous NH4Cl solution (100 mL), and the resulting mixture allowed to gradually warm to room temperature. The organic layer was next separated, and the aqueous layer was extracted with a mixture of ethyl acetate and THF (1:1, 50 mL×3). The combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo. The resulting sticky oil was suspended in hexane (100 mL) and stirred at room temperature for 30 min. The resulting solid was collected by filtration and washed with hexane to yield 14.9 g of the title compound as a colorless solid (83%). 1H NMR (400 MHz, CDCl3): δ 6.552 (s, 2H), 4.684 (s, 2H), 3.780 (s, 3H), 2.370 (s, 6H). 13C NMR (100 MHz, CDCl3): δ 141.714, 122.607, 112.325, 111.815, 55.238, 22.663. MS (EI): m/z 180.1 [M+, 100]. Anal. Calcd. For C9H13BO3: C, 60.05; H, 7.28. Found: C, 60.27; H, 7.42. An oven-dried three-neck round-bottom flask equipped with two rubber septum-sealed addition funnels a sidearm stopcock was evacuated with stirring over the course of 45 min at −78° C. to stir at −78° C. for an additional 30 min After stirring at −78° C. for an additional 1 h the mixture was quenched with saturated aqueous NH4Cl solution (100 mL) to gradually warm to room temperature the aqueous layer was extracted with a mixture of ethyl acetate and THF (1:1, 50 mL×3) The combined organic layers were dried over MgSO4 filtered concentrated in vacuo stirred at room temperature for 30 min The resulting solid was collected by filtration washed with hexane

反应条件: temp:90.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-Chloro-5-morpholinopyridin-3-amine (62 mg, 0.29 mmol), 4-methoxy-2,6-dimethylphenylboronic acid (0.07 g, 0.39 mmol), tricyclohexylphosphine (12 mg, 0.042 mmol), and tris(dibenzylideneacetone)dipalladium (0) (19 mg, 0.02 mmol) were added to a flask then degassed and backfilled with argon. To the flask, 1,4-dioxane (3 mL) and aq. 1.3M potassium phosphate tribasic (0.67 mL, 0.87 mmol) were added by syringe. The resulting reaction was heated to 90° C. and monitored with TLC and LC-MS. After 19 h, the reaction was cooled to rt then poured into water. After extracting twice with EtOAc and twice with DCM, the combined organic extractions were dried over anhydrous magnesium sulfate. After filtration and concentration, the residue was purified on silica gel (0-30% of a premixed solution of 89:9:1 DCM:MeOH:ammonium hydroxide in DCM) to afford a light yellow solid as 2-(4-methoxy-2,6-dimethylphenyl)-5-morpholinopyridin-3-amine. 1H NMR (500 MHz, CDCl3) δ ppm 7.75 (1H, br. s.), 6.75 (3H, m), 3.95 (4H, m), 3.85 (3H, m), 3.54 (2H, br. s.), 3.28 (4H, m), 2.04 (6H, s). Mass Spectrum (pos.) m/e: 314.2 (M+1). then degassed The resulting reaction the reaction was cooled to rt After extracting twice with EtOAc and twice with DCM the combined organic extractions were dried over anhydrous magnesium sulfate After filtration and concentration the residue was purified on silica gel (0-30% of a premixed solution of 89:9:1 DCM:MeOH:ammonium hydroxide in DCM)

反应条件: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A flame-dried sealable Schlenk tube was charged with 4-bromo-3,5-dimethyl-pyridine 1-oxide (1; 10.1 g, 50.0 mmol), 2 (18.0 g, 100 mmol), Pd2(dba)3 (0.915 g, 1.00 mmol), dicyclohexyl-(2-phenanthren-9-yl-phenyl)-phosphane (1.8 g, 4.0 mmol), and K3PO4 (31.9 g, 150 mmol). The Schlenk tube was next evacuated and backfilled with N2. Then, degassed dry toluene (100 mL) was added via syringe under N2. The Schlenk tube was sealed, and the mixture was stirred at 120° C. for 48 h. The reaction mixture was subsequently cooled to room temperature, diluted with methylene chloride (500 mL), filtered, and concentrated in vacuo. The resulting dark brown oil was allowed to stand at room temperature until the colorless crystalline product separated from the liquid. The solid was then collected by filtration and identified as the pure title compound (6.55 g). The filtrate was purified by flash chromatography eluting with 95:5 CHCl3: methanol to afford an additional 0.23 g of the title compound. The combined yield was 6.78 g (53%): mp 194-195° C.; 1H NMR (400 MHz, CD2Cl2): δ 7.990 (s, 2H), 6.705 (s, 2H), 3.798 (s, 3H), 1.892 (s, 6H), 1.842 (s, 6H); 13C NMR (125 MHz, CD2Cl2): δ 159.771, 139.578, 137.663, 137.187, 135.775, 128.289, 113.709, 55.605, 20.198, 17.087; MS (ESI): m/z 258.4 [(M+H)+, 100]; Anal. Calcd. For C16H19NO2: C, 74.68; H, 7.44; N, 5.44. Found: C, 74.54; H, 7.40; N, 5.51. The Schlenk tube was next evacuated Then, degassed dry toluene (100 mL) was added via syringe under N2 The Schlenk tube was sealed The reaction mixture was subsequently cooled to room temperature diluted with methylene chloride (500 mL) filtered concentrated in vacuo to stand at room temperature until the colorless crystalline product separated from the liquid The solid was then collected by filtration The filtrate was purified by flash chromatography eluting with 95:5 CHCl3

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: An oven-dried three-neck round-bottom flask equipped with two rubber septum-sealed addition funnels and a sidearm stopcock was evacuated and backfilled with N2. Dry THF (100 mL) and 2-bromo-5-methoxy-1,3-dimethyl-benzene (21.5 g, 0.100 mol) were then added via syringe. The mixture was then cooled to −78° C. with stirring in a dry ice-acetone bath. Next, n-butyl lithium (2.5 M solution in hexane, 44 mL, 0.11 mol) was added dropwise via syringe with stirring over the course of 45 min at −78° C., and the mixture was allowed to stir at −78° C. for an additional 30 min. Triisopropyl borate (28.2 g, 0.150 mol) was then added dropwise via syringe over the course of 30 min at −78° C. After stirring at −78° C. for an additional 1 h, the mixture was quenched with saturated aqueous NH4Cl solution (100 mL), and the resulting mixture allowed to gradually warm to room temperature. The organic layer was next separated, and the aqueous layer was extracted with a mixture of ethyl acetate and THF (1:1, 50 mL×3). The combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo. The resulting sticky oil was suspended in hexane (100 mL) and stirred at room temperature for 30 min. The resulting solid was collected by filtration and washed with hexane to yield 14.9 g of the title compound as a colorless solid (83%). 1H NMR (400 MHz, CDCl3): δ 6.552 (s, 2H), 4.684 (s, 2H), 3.780 (s, 3H), 2.370 (s, 6H). 13C NMR (100 MHz, CDCl3): δ 141.714, 122.607, 112.325, 111.815, 55.238, 22.663. MS (EI): m/z 180.1 [M+, 100]. Anal. Calcd. For C9H13BO3: C, 60.05; H, 7.28. Found: C, 60.27; H, 7.42. An oven-dried three-neck round-bottom flask equipped with two rubber septum-sealed addition funnels a sidearm stopcock was evacuated with stirring over the course of 45 min at −78° C. to stir at −78° C. for an additional 30 min After stirring at −78° C. for an additional 1 h the mixture was quenched with saturated aqueous NH4Cl solution (100 mL) to gradually warm to room temperature the aqueous layer was extracted with a mixture of ethyl acetate and THF (1:1, 50 mL×3) The combined organic layers were dried over MgSO4 filtered concentrated in vacuo stirred at room temperature for 30 min The resulting solid was collected by filtration washed with hexane