3-溴-4-羟基苯甲酸乙酯

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a mixture of 3-bromo-4-hydroxybenzoic acid ethyl ester (69.2 g, 282 mmol) in 2N aqueous potassium carbonate (423 mL) was added sufficient THF to completely dissolve the phenol and make the solution clear (˜300 to 500 mL). The solution was cooled to 0° C. and I2 (158 g, 621 mmol) was added portionwise at such a rate as not to accumulate a large amount of solid 12 on the bottom of the flask. After addition was complete, the ice bath was removed, and the solution was allowed to warm to room temperature. The reaction was complete in 2 h. Worked up by adding (slowly with caution) solid sodium bisulfite at a rate so excess foaming doesn't occur. Sodium bisulfite was added until nearly decolorized. The mixture was acidified with concentrated hydrochloric acid, extracted several times with ethyl acetate, the organic layers combined, washed with brine, dried over anhydrous sodium sulfate, decanted, and concentrated in vacuo to give 3-bromo-4-hydroxy-5-iodobenzoic acid ethyl ester (94.6 g, 90%) as a pale yellow solid. NMR indicated it was suitable for use in the next step without further purification. 1H NMR (300 MHz, CDCl3) δ1.39 (t, J=6.8 Hz, 3H, —CO2CH2CH3), 4.32 (t, J=6.8 Hz, 2H, —CO2CH2CH3), 8.14 (d, 1H, arom), 8.32 (d, 1H, arom). After addition the ice bath was removed to warm to room temperature by adding (slowly with caution) solid sodium bisulfite at a rate so excess foaming doesn't Sodium bisulfite was added extracted several times with ethyl acetate washed with brine dried over anhydrous sodium sulfate decanted concentrated in vacuo

反应条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: This procedure is modified from the work of Oberhauser (J. Org. Chem, 1997, 62,4504). To a solution of 4-hydroxybenzoic acid ethyl ester (57.8 g, 348 mmol) in 480 mL of dry acetonitrile was added HBF4 EtO (54% in Et2O, 32.9 mL). The solution was cooled to −15° C. with an ice/methanol bath. N-bromosuccmimide (67.2 g, 378 mmol) was added portionwise at a rate where the temperature would not rise above −10° C. After addition was complete, the cooling bath was removed and the reaction mixture wag allowed to stir overnight at room temperature. Worked up by pouring the reaction mixture into aqueous sodium bisulfite (38%, 200 mL) and extracting four times with ethyl acetate. The organic layers were combined, washed with water, saturated brine, dried over anhydrous sodium sulfate, decanted, and concentrated in vacuo to give a white solid. Recrystallization from ethyl acetate/hexane gave 3-bromo-4-hydroxybenzoic acid ethyl ester (70.7 g, 83%) as a white solid. 1H NMR (300 MHz, CDCl3) δ1.39 (t, J=6.7 Hz, 3H, —CO2CH2CH3), 4.34 (t, J=6.7 Hz, 2H, —CO2CH2CH3), 7.02 (d, 1H, arom), 7.91 (dd, 1H, arom), 8.19 (d, 1H, arom). rise above −10° C After addition the cooling bath was removed by pouring the reaction mixture into aqueous sodium bisulfite (38%, 200 mL) extracting four times with ethyl acetate washed with water, saturated brine dried over anhydrous sodium sulfate decanted concentrated in vacuo to give a white solid Recrystallization from ethyl acetate/hexane

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a mixture of 3-bromo-4-hydroxybenzoic acid ethyl ester (69.2 g, 282 mmol) in 2N aqueous potassium carbonate (423 mL) was added sufficient THF to completely dissolve the phenol and make the solution clear (˜300 to 500 mL). The solution was cooled to 0° C. and I2 (158 g, 621 mmol) was added portionwise at such a rate as not to accumulate a large amount of solid 12 on the bottom of the flask. After addition was complete, the ice bath was removed, and the solution was allowed to warm to room temperature. The reaction was complete in 2 h. Worked up by adding (slowly with caution) solid sodium bisulfite at a rate so excess foaming doesn't occur. Sodium bisulfite was added until nearly decolorized. The mixture was acidified with concentrated hydrochloric acid, extracted several times with ethyl acetate, the organic layers combined, washed with brine, dried over anhydrous sodium sulfate, decanted, and concentrated in vacuo to give 3-bromo-4-hydroxy-5-iodobenzoic acid ethyl ester (94.6 g, 90%) as a pale yellow solid. NMR indicated it was suitable for use in the next step without further purification. 1H NMR (300 MHz, CDCl3) δ1.39 (t, J=6.8 Hz, 3H, —CO2CH2CH3), 4.32 (t, J=6.8 Hz, 2H, —CO2CH2CH3), 8.14 (d, 1H, arom), 8.32 (d, 1H, arom). After addition the ice bath was removed to warm to room temperature by adding (slowly with caution) solid sodium bisulfite at a rate so excess foaming doesn't Sodium bisulfite was added extracted several times with ethyl acetate washed with brine dried over anhydrous sodium sulfate decanted concentrated in vacuo

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a mixture of 3-bromo-4-hydroxybenzoic acid ethyl ester (69.2 g, 282 mmol) in 2N aqueous potassium carbonate (423 mL) was added sufficient THF to completely dissolve the phenol and make the solution clear (˜300 to 500 mL). The solution was cooled to 0° C. and I2 (158 g, 621 mmol) was added portionwise at such a rate as not to accumulate a large amount of solid 12 on the bottom of the flask. After addition was complete, the ice bath was removed, and the solution was allowed to warm to room temperature. The reaction was complete in 2 h. Worked up by adding (slowly with caution) solid sodium bisulfite at a rate so excess foaming doesn't occur. Sodium bisulfite was added until nearly decolorized. The mixture was acidified with concentrated hydrochloric acid, extracted several times with ethyl acetate, the organic layers combined, washed with brine, dried over anhydrous sodium sulfate, decanted, and concentrated in vacuo to give 3-bromo-4-hydroxy-5-iodobenzoic acid ethyl ester (94.6 g, 90%) as a pale yellow solid. NMR indicated it was suitable for use in the next step without further purification. 1H NMR (300 MHz, CDCl3) δ1.39 (t, J=6.8 Hz, 3H, —CO2CH2CH3), 4.32 (t, J=6.8 Hz, 2H, —CO2CH2CH3), 8.14 (d, 1H, arom), 8.32 (d, 1H, arom). After addition the ice bath was removed to warm to room temperature by adding (slowly with caution) solid sodium bisulfite at a rate so excess foaming doesn't Sodium bisulfite was added extracted several times with ethyl acetate washed with brine dried over anhydrous sodium sulfate decanted concentrated in vacuo

反应条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: This procedure is modified from the work of Oberhauser (J. Org. Chem, 1997, 62,4504). To a solution of 4-hydroxybenzoic acid ethyl ester (57.8 g, 348 mmol) in 480 mL of dry acetonitrile was added HBF4 EtO (54% in Et2O, 32.9 mL). The solution was cooled to −15° C. with an ice/methanol bath. N-bromosuccmimide (67.2 g, 378 mmol) was added portionwise at a rate where the temperature would not rise above −10° C. After addition was complete, the cooling bath was removed and the reaction mixture wag allowed to stir overnight at room temperature. Worked up by pouring the reaction mixture into aqueous sodium bisulfite (38%, 200 mL) and extracting four times with ethyl acetate. The organic layers were combined, washed with water, saturated brine, dried over anhydrous sodium sulfate, decanted, and concentrated in vacuo to give a white solid. Recrystallization from ethyl acetate/hexane gave 3-bromo-4-hydroxybenzoic acid ethyl ester (70.7 g, 83%) as a white solid. 1H NMR (300 MHz, CDCl3) δ1.39 (t, J=6.7 Hz, 3H, —CO2CH2CH3), 4.34 (t, J=6.7 Hz, 2H, —CO2CH2CH3), 7.02 (d, 1H, arom), 7.91 (dd, 1H, arom), 8.19 (d, 1H, arom). rise above −10° C After addition the cooling bath was removed by pouring the reaction mixture into aqueous sodium bisulfite (38%, 200 mL) extracting four times with ethyl acetate washed with water, saturated brine dried over anhydrous sodium sulfate decanted concentrated in vacuo to give a white solid Recrystallization from ethyl acetate/hexane

反应条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: This procedure is modified from the work of Oberhauser (J. Org. Chem, 1997, 62,4504). To a solution of 4-hydroxybenzoic acid ethyl ester (57.8 g, 348 mmol) in 480 mL of dry acetonitrile was added HBF4 EtO (54% in Et2O, 32.9 mL). The solution was cooled to −15° C. with an ice/methanol bath. N-bromosuccmimide (67.2 g, 378 mmol) was added portionwise at a rate where the temperature would not rise above −10° C. After addition was complete, the cooling bath was removed and the reaction mixture wag allowed to stir overnight at room temperature. Worked up by pouring the reaction mixture into aqueous sodium bisulfite (38%, 200 mL) and extracting four times with ethyl acetate. The organic layers were combined, washed with water, saturated brine, dried over anhydrous sodium sulfate, decanted, and concentrated in vacuo to give a white solid. Recrystallization from ethyl acetate/hexane gave 3-bromo-4-hydroxybenzoic acid ethyl ester (70.7 g, 83%) as a white solid. 1H NMR (300 MHz, CDCl3) δ1.39 (t, J=6.7 Hz, 3H, —CO2CH2CH3), 4.34 (t, J=6.7 Hz, 2H, —CO2CH2CH3), 7.02 (d, 1H, arom), 7.91 (dd, 1H, arom), 8.19 (d, 1H, arom). rise above −10° C After addition the cooling bath was removed by pouring the reaction mixture into aqueous sodium bisulfite (38%, 200 mL) extracting four times with ethyl acetate washed with water, saturated brine dried over anhydrous sodium sulfate decanted concentrated in vacuo to give a white solid Recrystallization from ethyl acetate/hexane

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 5.5 g of sodium hydride was added to a tetrahydrofuran (300 ml) solution of 20.5 g of ethyl 3-bromo-4-hydroxybenzoate produced according to the method described in Monatsh. Chem.; 22; 1901; 437, with cooling with ice, and the reaction liquid was stirred for 30 minutes, and then, at the same temperature, 10 ml of chloromethyl methyl ether was added to the reaction liquid, and the reaction liquid was stirred overnight at room temperature. The reaction liquid was diluted with ethyl acetate, and washed with water, and the aqueous layer was extracted with ethyl acetate, and dried with anhydrous magnesium sulfate. The solvent was evaporated away under reduced pressure, and the resulting solid was suspended in hexane and then taken out through filtration to obtain the entitled compound as a white solid. produced 437, with cooling with ice the reaction liquid the reaction liquid was stirred overnight at room temperature The reaction liquid washed with water the aqueous layer was extracted with ethyl acetate dried with anhydrous magnesium sulfate The solvent was evaporated away under reduced pressure taken out through filtration

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 5.5 g of sodium hydride was added to a tetrahydrofuran (300 ml) solution of 20.5 g of ethyl 3-bromo-4-hydroxybenzoate produced according to the method described in Monatsh. Chem.; 22; 1901; 437, with cooling with ice, and the reaction liquid was stirred for 30 minutes, and then, at the same temperature, 10 ml of chloromethyl methyl ether was added to the reaction liquid, and the reaction liquid was stirred overnight at room temperature. The reaction liquid was diluted with ethyl acetate, and washed with water, and the aqueous layer was extracted with ethyl acetate, and dried with anhydrous magnesium sulfate. The solvent was evaporated away under reduced pressure, and the resulting solid was suspended in hexane and then taken out through filtration to obtain the entitled compound as a white solid. produced 437, with cooling with ice the reaction liquid the reaction liquid was stirred overnight at room temperature The reaction liquid washed with water the aqueous layer was extracted with ethyl acetate dried with anhydrous magnesium sulfate The solvent was evaporated away under reduced pressure taken out through filtration