3-叔丁基邻苯二酚

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of styrene (13.5 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated. The residue is redissolved in triglyme (0.5 M). Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature. The flask is equipped with a reflux condenser, fritted gas dispersion tube, and internal Temperature probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed. Some dimethyl 2-phenyl-cyclohexane-1,4-dicarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated The residue is redissolved in triglyme (0.5 M) Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature The flask is equipped with a reflux condenser, fritted gas dispersion tube is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of methyl acrylate (10.6 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated (0.5 M). Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature. The flask is equipped with a reflux condenser, fritted gas dispersion tube, and internal T probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed. Some trimethyl cyclohexane-1,2,4-tricarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated (0.5 M) Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature The flask is equipped with a reflux condenser, fritted gas dispersion tube is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of styrene (13.5 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated. The residue is redissolved in triglyme (0.5 M). Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature. The flask is equipped with a reflux condenser, fritted gas dispersion tube, and internal Temperature probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed. Some dimethyl 2-phenyl-cyclohexane-1,4-dicarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated The residue is redissolved in triglyme (0.5 M) Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature The flask is equipped with a reflux condenser, fritted gas dispersion tube is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of methyl acrylate (10.6 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated (0.5 M). Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature. The flask is equipped with a reflux condenser, flitted gas dispersion tube, and internal T probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed. Some trimethyl cyclohexane-1,2,4-tricarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated (0.5 M) Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature The flask is equipped with a reflux condenser is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: (36.6 g, 0.30 mol) of 2,6-dimethylphenol are mixed in an Hastelloy C autoclave with 0.315 mol of acetic anhydride and 9 mols of hydrogen fluoride. The temperature is raised to 50° C. and the reaction runs for 3 hours. After extraction and wash, 47.4 g of a gray to purple solid mass of 3,5-dimethyl-4-hydroxyacetophenone is obtained. This solid is then esterified by refluxing with 4 mols of acetic anhydride for 19 hours. After removal of acetic acid and acetic anhydride by vacuum distillation the 3,5-dimethyl-4-acetoxyacetophenone is flash distilled to yield 47.7 g of a slightly yellow liquid. 0.1 mol of the 3,5-dimethyl-4-acetoxyacetophenone, 1.2 g of 5% Pd/C as catalyst and 100 ml ethanol are mixed in an autoclave and the autoclave is charged with hydrogen gas at a pressure of 215-220 mm Hg PSIG and the reaction is run for about 21/2 hours at a temperature of about 25°-30° C. Additional catalyst is added as needed. The catalyst is then removed and the ethanol evaporated to yield 21.5 g of a colorless oil which is 1-(3',5'-dimethyl-4'-acetoxyphenyl)ethanol. 0.168 mol of 1-(3',5'-dimethyl-4'-acetoxyphenyl)ethanol is added to a flask with 0.35 g KHSO4 and 0.5 g t-butyl catechol. The flask is heated to 185° to 190° C. at 1.5 to 2.0 mm Hg. A colorless liquid is distilled. After the addition of 0.15 g of t-butyl catechol, and redistillation, 26.1 g of 3,5- dimethyl-4-acetoxystyrene monomer is produced. The compound has a boiling point of 90°-91° C. at 0.5 mm of Hg and the yield is 81.8%. The flask is heated to 185° to 190° C. at 1.5 to 2.0 mm Hg A colorless liquid is distilled After the addition of 0.15 g of t-butyl catechol, and redistillation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: (36.6 g, 0.30 mol) of 2,6-dimethylphenol are mixed in an Hastelloy C autoclave with 0.315 mol of acetic anhydride and 9 mols of hydrogen fluoride. The temperature is raised to 50° C. and the reaction runs for 3 hours. After extraction and wash, 47.4 g of a gray to purple solid mass of 3,5-dimethyl-4-hydroxyacetophenone is obtained. This solid is then esterified by refluxing with 4 mols of acetic anhydride for 19 hours. After removal of acetic acid and acetic anhydride by vacuum distillation the 3,5-dimethyl-4-acetoxyacetophenone is flash distilled to yield 47.7 g of a slightly yellow liquid. 0.1 mol of the 3,5-dimethyl-4-acetoxyacetophenone, 1.2 g of 5% Pd/C as catalyst and 100 ml ethanol are mixed in an autoclave and the autoclave is charged with hydrogen gas at a pressure of 215-220 mm Hg PSIG and the reaction is run for about 21/2 hours at a temperature of about 25°-30° C. Additional catalyst is added as needed. The catalyst is then removed and the ethanol evaporated to yield 21.5 g of a colorless oil which is 1-(3',5'-dimethyl-4'-acetoxyphenyl)ethanol. 0.168 mol of 1-(3',5'-dimethyl-4'-acetoxyphenyl)ethanol is added to a flask with 0.35 g KHSO4 and 0.5 g t-butyl catechol. The flask is heated to 185° to 190° C. at 1.5 to 2.0 mm Hg. A colorless liquid is distilled. After the addition of 0.15 g of t-butyl catechol, and redistillation, 26.1 g of 3,5- dimethyl-4-acetoxystyrene monomer is produced. The compound has a boiling point of 90°-91° C. at 0.5 mm of Hg and the yield is 81.8%. The flask is heated to 185° to 190° C. at 1.5 to 2.0 mm Hg A colorless liquid is distilled After the addition of 0.15 g of t-butyl catechol, and redistillation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The product of the hydrocyanation of butadiene using a nickel catalyst and a boron promoter contains 2-methylglutaronitrile, adiponitrile, phenyl t-butylcatecholboronate, and other organo boron compounds such as triphenyl boron, phenyl boronic acid, its anhydride and its phenol and cresol esters. (The t-butylcatecholboronate is formed by the reaction of t-butylcatechol with a boron compound. The t-butylcatechol is an additive used to inhibit the polymerization of butadiene.) This mixture is combined with the alcohol (e.g. ethylene glycol) in at least stoichiometric quantity relative to boron, and the mixture is distilled using a column with sufficient stages to separate out purified adiponitrile as the bottoms, and a mixture of 2-methylglutaronitrile, any excess alcohol (e.g. ethylene glycol), phenol, cresols, and the newly formed boron-complex, (e.g. phenyl ethyleneglycolboronate) as the overheads. (The adiponitrile bottoms may contain some t-butylcatechol at this point, depending on the efficiency of the column.) The overhead mixture is then further distilled in a second column to remove low boilers consisting of any excess ethylene glycol, phenol, cresols, and phenyl ethyleneglycolboronate. 2-methylglutaronitrile is removed as the bottoms, which are then sent to a third column where pure 2-methylglutaronitrile is taken overhead. The bottoms from this last column consist of t-butylcatechol and a small amount of adiponitrile.

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of styrene (13.5 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated. The residue is redissolved in triglyme (0.5 M). Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature. The flask is equipped with a reflux condenser, fritted gas dispersion tube, and internal Temperature probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed. Some dimethyl 2-phenyl-cyclohexane-1,4-dicarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated The residue is redissolved in triglyme (0.5 M) Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature The flask is equipped with a reflux condenser, fritted gas dispersion tube is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of methyl acrylate (10.6 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated (0.5 M). Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature. The flask is equipped with a reflux condenser, fritted gas dispersion tube, and internal T probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed. Some trimethyl cyclohexane-1,2,4-tricarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated (0.5 M) Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature The flask is equipped with a reflux condenser, fritted gas dispersion tube is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of methyl acrylate (10.6 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated (0.5 M). Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature. The flask is equipped with a reflux condenser, fritted gas dispersion tube, and internal T probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed. Some trimethyl cyclohexane-1,2,4-tricarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated (0.5 M) Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature The flask is equipped with a reflux condenser, fritted gas dispersion tube is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of styrene (13.5 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated. The residue is redissolved in triglyme (0.5 M). Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature. The flask is equipped with a reflux condenser, fritted gas dispersion tube, and internal Temperature probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed. Some dimethyl 2-phenyl-cyclohexane-1,4-dicarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated The residue is redissolved in triglyme (0.5 M) Pd/Al2O3 catalyst is added (636 mg (0.5 mol percent) of Johnson-Matthey 5 percent Pd/Al2O3 #12) at room temperature The flask is equipped with a reflux condenser, fritted gas dispersion tube is heated to reflux for 63 hours whereby dimethyl phenyl-terephthalate is formed

反应条件: temp:150.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 75 ml sealed tube, a stirred suspension of trans,trans dimethyl muconate (10.0 g, 58.8 mmol), two equivalents of methyl acrylate (10.6 ml, 117.6 mmol), neutral Al2O3 (300 mg of Aldrich 199974, 3 mass percent), and tert-butyl catechol (25 mg, 0.2 mol percent) in diglyme (20 ml, 2.9 M) is heated to 150° C. for 24 hours. After cooling to room temperature, the reaction mixture is filtered, transferred to a flask, and concentrated (0.5 M). Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature. The flask is equipped with a reflux condenser, flitted gas dispersion tube, and internal T probe. Under N2 flow (190 ml/min) and stirring (190 rpm) the mixture is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed. Some trimethyl cyclohexane-1,2,4-tricarboxylate is also produced. In a 75 ml sealed tube After cooling to room temperature the reaction mixture is filtered transferred to a flask concentrated (0.5 M) Pd/C catalyst is added (856 mg (0.3 mol percent) of Johnson-Matthey 5 percent Pd/C #6) at room temperature The flask is equipped with a reflux condenser is heated to reflux for 27 hours whereby trimethyl trimellitate (46 percent over 2 steps) is formed