对氟苯丙炔酸甲酯

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of (4-fluorophenyl)propynoic acid methyl ester (1.6 g, 9.0 mmol) in MeOH (10 mL) and H2O (10 mL) was heated at 60° C. and MeNHNH2 (0.5 mL, 9.4 mmol) was added. The reaction mixture was stirred at 60° C. for 20 min. then filtered. The residue was washed with H2O (10 mL) and MeOH (5 mL) and dried to give 5-(4-fluorophenyl)-1-methyl-1,2-dihydro-pyrazol-3-one (0.63 g, 36%). The filtrate was then concentrated under reduced pressure and the residue dissolved in EtOAc (20 ml) and washed with H2O (3×15 mL). The aqueous layer was acidified to pH 5.5 with 2 M citric acid solution (3×15 mL) and extracted with EtOAc (3×20 mL). The extracts were dried (MgSO4) and concentrated under reduced pressure to give 5-(4-fluoro-phenyl)-2-methyl-1,2-dihydro-pyrazol-3-one (0.2 g, 12%). then filtered The residue was washed with H2O (10 mL) and MeOH (5 mL) dried

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 4-fluorophenylacetylene (2.86 mL, 3.00 g, 24.97 mmol) in tetrahydrofuran at −78° C. was treated with a solution of n-butyllithium in hexanes (2.29 M, 12.0 mL, 27.5 mmol) followed by stirring at −78° C. for 45 minutes. The solution was then treated rapidly with methyl chloroformate (2.12 mL, 2.60 g, 27.5 mmol) followed by stirring at −78° C. for 30 minutes and warming to room temperature for 18 hours. The mixture was treated with water and concentrated in vacuo to remove tetrahydrofuran. The residue was dissolved in ethyl acetate and washed with water and saturated sodium chloride solution. Drying (Na2SO4) and concentration in vacuo afforded a yellow solid, which was chromatographed over a 340 g silica gel cartridge, eluting with 15-50% dichloromethane in hexanes. These procedures afforded the product (2.95 g, 66%) as an off-white fluffy solid. by stirring at −78° C. for 30 minutes warming to room temperature for 18 hours concentrated in vacuo to remove tetrahydrofuran The residue was dissolved in ethyl acetate washed with water and saturated sodium chloride solution Drying (Na2SO4) and concentration in vacuo afforded a yellow solid, which was chromatographed over a 340 g silica gel cartridge eluting with 15-50% dichloromethane in hexanes

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 4-fluorophenylacetylene (2.86 mL, 3.00 g, 24.97 mmol) in tetrahydrofuran at −78° C. was treated with a solution of n-butyllithium in hexanes (2.29 M, 12.0 mL, 27.5 mmol) followed by stirring at −78° C. for 45 minutes. The solution was then treated rapidly with methyl chloroformate (2.12 mL, 2.60 g, 27.5 mmol) followed by stirring at −78° C. for 30 minutes and warming to room temperature for 18 hours. The mixture was treated with water and concentrated in vacuo to remove tetrahydrofuran. The residue was dissolved in ethyl acetate and washed with water and saturated sodium chloride solution. Drying (Na2SO4) and concentration in vacuo afforded a yellow solid, which was chromatographed over a 340 g silica gel cartridge, eluting with 15-50% dichloromethane in hexanes. These procedures afforded the product (2.95 g, 66%) as an off-white fluffy solid. by stirring at −78° C. for 30 minutes warming to room temperature for 18 hours concentrated in vacuo to remove tetrahydrofuran The residue was dissolved in ethyl acetate washed with water and saturated sodium chloride solution Drying (Na2SO4) and concentration in vacuo afforded a yellow solid, which was chromatographed over a 340 g silica gel cartridge eluting with 15-50% dichloromethane in hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The title compound was synthesized from (4-fluoro-phenyl)-propynoic acid methyl ester and 7-[2-(1H-Indol-5-yloxy)-ethyl]-3,4-dihydro-2H-[1,8]naphthyridine-1-carboxylic acid tert-butyl ester using the procedure described in Example 17, step (a), in 73% yield as an E/Z isomeric mixture. 1H NMR (CDCl3) [E/Z mixture] δ 7.43 (m, 1H), 7.30 (m, 2H), 7.00-7.20 (m, 3), 6.94 (m, 1H), 6.50-6.90 (m, 3H), 6.12 (s, 1H), 4.36 (m, 2H), 3.75 (m, 2H), 3.7 and 3.6 (s, 3H), 3.20 (m, 2H), 2.75 (m, 2H), 1.90 (m, 2H), 1.50 (s, 9H). Mass Spectrum (LCMS, ESI) calculated for C33H35FN3O5 572.3 (M+H); found 472.3 (M-Boc+H).

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The title compound was synthesized from (4-fluoro-phenyl)-propynoic acid methyl ester and 7-[2-(1H-Indol-5-yloxy)-ethyl]-3,4-dihydro-2H-[1,8]naphthyridine-1-carboxylic acid tert-butyl ester using the procedure described in Example 17, step (a), in 73% yield as an E/Z isomeric mixture. 1H NMR (CDCl3) [E/Z mixture] δ 7.43 (m, 1H), 7.30 (m, 2H), 7.00-7.20 (m, 3), 6.94 (m, 1H), 6.50-6.90 (m, 3H), 6.12 (s, 1H), 4.36 (m, 2H), 3.75 (m, 2H), 3.7 and 3.6 (s, 3H), 3.20 (m, 2H), 2.75 (m, 2H), 1.90 (m, 2H), 1.50 (s, 9H). Mass Spectrum (LCMS, ESI) calculated for C33H35FN3O5 572.3 (M+H); found 472.3 (M-Boc+H).

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of methyl 3-(4-fluorophenyl)propiolate (3.47 g, 19.5 mmol) and 1-amino-2-methylpyridinium 2,4,6-trimethylbenzenesulfonate (6.0 g, 19.5 mmol) in dry acetonitrile (75 mL) was added, dropwise over 10 min a solution of 1,8-diazabicycloundec-7-ene (5.82 mL, 39 mmol) in dry acetonitrile (25 mL). The mixture was allowed to stir at room temperature for about 18 hours. The solvent was evaporated under reduced pressure and the residue was partitioned between water (500 mL) and ethyl acetate (250 mL) and the organic phase separated. The aqueous was extracted with ethyl acetate and the combined organic extracts are dried over anhydrous magnesium sulfate, and the solvent removed under vacuum. The residue was purified by chromatography on silica gel using 10:1 hexanes:ethyl acetate as eluent to give the title compound as a white solid, 4.65 g (86%). 1H NMR (CDCl3) δ 8.15 (d, 1H, J=8.8 Hz), 7.86 (m, 2H), 7.41 (t, 1H, J=8.9 Hz), 7.19 (t, 2H, J=17.6 Hz), 6.87 (d, 1H, J=7.0 Hz), 3.89 (s, 3H), 2.85 (s, 3H). MS (+ve ion electrospray) 285 (100), (MH+). The solvent was evaporated under reduced pressure the residue was partitioned between water (500 mL) and ethyl acetate (250 mL) the organic phase separated The aqueous was extracted with ethyl acetate the combined organic extracts are dried over anhydrous magnesium sulfate the solvent removed under vacuum The residue was purified by chromatography on silica gel using 10:1 hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a stirred solution of methyl 3-(4-fluorophenyl)propiolate (3.47 g, 19.5 mmol) and 1-amino-2-methylpyridinium 2,4,6-trimethylbenzenesulfonate (6.0 g, 19.5 mmol) in dry acetonitrile (75 mL) was added, dropwise over 10 min a solution of 1,8-diazabicycloundec-7-ene (5.82 mL, 39 mmol) in dry acetonitrile (25 mL). The mixture was allowed to stir at room temperature for about 18 hours. The solvent was evaporated under reduced pressure and the residue was partitioned between water (500 mL) and ethyl acetate (250 mL) and the organic phase separated. The aqueous was extracted with ethyl acetate and the combined organic extracts are dried over anhydrous magnesium sulfate, and the solvent removed under vacuum. The residue was purified by chromatography on silica gel using 10:1 hexanes:ethyl acetate as eluent to give the title compound as a white solid, 4.65 g (86%). 1H NMR (CDCl3) δ 8.15 (d, 1H, J=8.8 Hz), 7.86 (m, 2H), 7.41 (t, 1H, J=8.9 Hz), 7.19 (t, 2H, J=17.6 Hz), 6.87 (d, 1H, J=7.0 Hz), 3.89 (s, 3H), 2.85 (s, 3H). MS (+ve ion electrospray) 285 (100), (MH+). The solvent was evaporated under reduced pressure the residue was partitioned between water (500 mL) and ethyl acetate (250 mL) the organic phase separated The aqueous was extracted with ethyl acetate the combined organic extracts are dried over anhydrous magnesium sulfate the solvent removed under vacuum The residue was purified by chromatography on silica gel using 10:1 hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 1-(4-fluorophenyl)-2-trimethylsilylacetylene (64 g, 0.33 mol) in dry diethyl ether (400 mL) was cooled to 0° C. under a nitrogen atmosphere. To this solution was added, dropwise over 45 minutes, a solution of tetrabutylammonium fluoride (1M in tetrahydrofuran, 330 mL, 0.33 mol) via a dropping funnel maintaining the internal temperature below 2° C. The mixture was allowed to warm to room temperature over about 1 hour. Diethyl ether (300 mL) was added to the mixture and the organic solution was washed with water, saturated brine and then dried over anhydrous magnesium sulfate. The magnesium sulfate was removed by filtration and the filtrate was cooled to about −78° C. n-Butyl lithium (1.6M in hexanes, 450 mL, 0.72 mol) was added dropwise via a dropping funnel over about 1 hour while the temperature was maintained below −66° C. After complete addition the mixture was stirred at −78° C. for about 1 hour and then a precooled solution of methyl chloroformate (110 mL, 1.4 mol) in dry diethyl ether (200 mL) was added in a continuous stream as fast as possible. The mixture was allowed to cool to −78° C. and the allowed to warm to room temperature over 1.5 h. The organic reaction mixture was washed with water and saturated brine and then dried over anhydrous magnesium sulfate. The solvents are remove under reduced pressure and the residue dried under reduced pressure to give the title compound as a brown solid, 36.5 g (61%). 1H NMR (CDCl3) δ 7.58 (dd, 2H, J=9, 5.4 Hz), 7.07 (t, 2H, J=8.5 Hz), 3.84 (s, 3H). MS (+ve ion electrospray) 178 (30), (M+). To this solution was added, dropwise over 45 minutes the organic solution was washed with water, saturated brine dried over anhydrous magnesium sulfate The magnesium sulfate was removed by filtration was added dropwise via a dropping funnel over about 1 hour while the temperature was maintained below −66° C After complete addition the mixture to cool to −78° C. to warm to room temperature over 1.5 h The organic reaction mixture was washed with water and saturated brine dried over anhydrous magnesium sulfate The solvents are remove under reduced pressure the residue dried under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 1-(4-fluorophenyl)-2-trimethylsilylacetylene (64 g, 0.33 mol) in dry diethyl ether (400 mL) was cooled to 0° C. under a nitrogen atmosphere. To this solution was added, dropwise over 45 minutes, a solution of tetrabutylammonium fluoride (1M in tetrahydrofuran, 330 mL, 0.33 mol) via a dropping funnel maintaining the internal temperature below 2° C. The mixture was allowed to warm to room temperature over about 1 hour. Diethyl ether (300 mL) was added to the mixture and the organic solution was washed with water, saturated brine and then dried over anhydrous magnesium sulfate. The magnesium sulfate was removed by filtration and the filtrate was cooled to about −78° C. n-Butyl lithium (1.6M in hexanes, 450 mL, 0.72 mol) was added dropwise via a dropping funnel over about 1 hour while the temperature was maintained below −66° C. After complete addition the mixture was stirred at −78° C. for about 1 hour and then a precooled solution of methyl chloroformate (110 mL, 1.4 mol) in dry diethyl ether (200 mL) was added in a continuous stream as fast as possible. The mixture was allowed to cool to −78° C. and the allowed to warm to room temperature over 1.5 h. The organic reaction mixture was washed with water and saturated brine and then dried over anhydrous magnesium sulfate. The solvents are remove under reduced pressure and the residue dried under reduced pressure to give the title compound as a brown solid, 36.5 g (61%). 1H NMR (CDCl3) δ 7.58 (dd, 2H, J=9, 5.4 Hz), 7.07 (t, 2H, J=8.5 Hz), 3.84 (s, 3H). MS (+ve ion electrospray) 178 (30), (M+). To this solution was added, dropwise over 45 minutes the organic solution was washed with water, saturated brine dried over anhydrous magnesium sulfate The magnesium sulfate was removed by filtration was added dropwise via a dropping funnel over about 1 hour while the temperature was maintained below −66° C After complete addition the mixture to cool to −78° C. to warm to room temperature over 1.5 h The organic reaction mixture was washed with water and saturated brine dried over anhydrous magnesium sulfate The solvents are remove under reduced pressure the residue dried under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of 1-(4-fluorophenyl)-2-trimethylsilylacetylene (64 g, 0.33 mol) in dry diethyl ether (400 mL) was cooled to 0° C. under a nitrogen atmosphere. To this solution was added, dropwise over 45 minutes, a solution of tetrabutylammonium fluoride (1M in tetrahydrofuran, 330 mL, 0.33 mol) via a dropping funnel maintaining the internal temperature below 2° C. The mixture was allowed to warm to room temperature over about 1 hour. Diethyl ether (300 mL) was added to the mixture and the organic solution was washed with water, saturated brine and then dried over anhydrous magnesium sulfate. The magnesium sulfate was removed by filtration and the filtrate was cooled to about −78° C. n-Butyl lithium (1.6M in hexanes, 450 mL, 0.72 mol) was added dropwise via a dropping funnel over about 1 hour while the temperature was maintained below −66° C. After complete addition the mixture was stirred at −78° C. for about 1 hour and then a precooled solution of methyl chloroformate (110 mL, 1.4 mol) in dry diethyl ether (200 mL) was added in a continuous stream as fast as possible. The mixture was allowed to cool to −78° C. and the allowed to warm to room temperature over 1.5 h. The organic reaction mixture was washed with water and saturated brine and then dried over anhydrous magnesium sulfate. The solvents are remove under reduced pressure and the residue dried under reduced pressure to give the title compound as a brown solid, 36.5 g (61%). 1H NMR (CDCl3) δ 7.58 (dd, 2H, J=9, 5.4 Hz), 7.07 (t, 2H, J=8.5 Hz), 3.84 (s, 3H). MS (+ve ion electrospray) 178 (30), (M+). To this solution was added, dropwise over 45 minutes the organic solution was washed with water, saturated brine dried over anhydrous magnesium sulfate The magnesium sulfate was removed by filtration was added dropwise via a dropping funnel over about 1 hour while the temperature was maintained below −66° C After complete addition the mixture to cool to −78° C. to warm to room temperature over 1.5 h The organic reaction mixture was washed with water and saturated brine dried over anhydrous magnesium sulfate The solvents are remove under reduced pressure the residue dried under reduced pressure