4-(二甲基氨基)丁-2-烯酰氯盐酸盐

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-{[6-(3-chloro-4-(2-pyridyl)methoxyphenylamino)-pyrimidin-4-ylamino]phenylamine (IR-9) was dissolved in N-methylpyrrolidinone (1.2 mL) and added dropwise over 10 minutes to the ice-cold solution of (E)-4-(dimethylamino)but-2-enoyl chloride hydrochloride in acetonitrile. The reaction was stirred in an ice bath for 2 hr. To the mixture was added sodium bicarbonate to pH greater than 9. The oil that formed was extracted with EtOAc (3×25 mL). A portion of the material was insoluble and set aside. The organic layer was dried (MgSO4) filtered and evaporated to a dark red oil. Both oils contained substantial amount of product as shown by TLC: SiO2CHCl3:MeOH/NH4OH (8:1) 19:1. The oils were combined and purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities followed by 10% methanol/ammonium hydroxide 8/1 to elute 59 mg of product. The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1 to give the title compound (16.3 mg, 0.03 mmol, 6.4% yield). MS (ES+) 530(M+): 552, (M+Na); 1H NMR (DMSO-d6, 500 MHz) δ (ppm): 10.04 (s, 1H), 9.19 (s, 1H), 9.14 (s, 1H), 8.60 (s, 1H), 8.27 (s, 1H), 7.88 (s, 2H), 7.57 (s, 1H), 7.36 (d, 1H, J=7.4 Hz), 7.29 (d, 2H, J=7.8 Hz), 7.22 (d, 2H, J=7.9 Hz), 7.18 (m, 2H), 6.74 (m, 1H), 6.30 (d, 1H, J=15 Hz) 6.10 (s, 1H), 5.24 (s, 2H), 3.06 (s, 2H), 2.18 (s, 6H) ppm; HPLC: tR=5.15 min, 97.5% (YMC-Pack ODS-A 4.6×100 mm, 80% water/20% acetonitrile to 5% water/95% acetonitrile over 5.5 min, hold to 9 min.). The oil that formed was extracted with EtOAc (3×25 mL) The organic layer was dried (MgSO4) filtered evaporated to a dark red oil purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities to elute 59 mg of product The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To (E)-4-(dimethylamino)but-2-enoic acid hydrochloride (110 mg, 0.664 mmol) in acetonitrile (1.5 mL) was added oxalyl dichloride (75.9 mg, 0.598 mmol) followed by one drop of DMF. After heating to 60° C. for 30 minutes, the mixture was cooled to room temperature and concentrated to 0.5 mL total volume. The resulting solution was used without further purification. the mixture was cooled to room temperature concentrated to 0.5 mL total volume The resulting solution was used without further purification

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To (E)-4-(dimethylamino)but-2-enoic acid hydrochloride (110 mg, 0.664 mmol) in acetonitrile (1.5 mL) was added oxalyl dichloride (75.9 mg, 0.598 mmol) followed by one drop of DMF. After heating to 60° C. for 30 minutes, the mixture was cooled to room temperature and concentrated to 0.5 mL total volume. The resulting solution was used without further purification. the mixture was cooled to room temperature concentrated to 0.5 mL total volume The resulting solution was used without further purification

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-{[6-(3-chloro-4-(2-pyridyl)methoxyphenylamino)-pyrimidin-4-ylamino]phenylamine (IR-9) was dissolved in N-methylpyrrolidinone (1.2 mL) and added dropwise over 10 minutes to the ice-cold solution of (E)-4-(dimethylamino)but-2-enoyl chloride hydrochloride in acetonitrile. The reaction was stirred in an ice bath for 2 hr. To the mixture was added sodium bicarbonate to pH greater than 9. The oil that formed was extracted with EtOAc (3×25 mL). A portion of the material was insoluble and set aside. The organic layer was dried (MgSO4) filtered and evaporated to a dark red oil. Both oils contained substantial amount of product as shown by TLC: SiO2CHCl3:MeOH/NH4OH (8:1) 19:1. The oils were combined and purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities followed by 10% methanol/ammonium hydroxide 8/1 to elute 59 mg of product. The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1 to give the title compound (16.3 mg, 0.03 mmol, 6.4% yield). MS (ES+) 530 (M+): 552, (M+Na); 1H NMR (DMSO-d6, 500 MHz) δ (ppm): 10.04 (s, 1H), 9.19 (s, 1H), 9.14 (s, 1H), 8.60 (s, 1H), 8.27 (s, 1H), 7.88 (s, 2H), 7.57 (s, 1H), 7.36 (d, 1H, J=7.4 Hz), 7.29 (d, 2H, J=7.8 Hz), 7.22 (d, 2H, J=7.9 Hz), 7.18 (m, 2H), 6.74 (m, 1H), 6.30 (d, 1H, J=15 Hz) 6.10 (s, 1H), 5.24 (s, 2H), 3.06 (s, 2H), 2.18 (s, 6H) ppm; HPLC: tR=5.15 min, 97.5% (YMC-Pack ODS-A 4.6×100 mm, 80% water/20% acetonitrile to 5% water/95% acetonitrile over 5.5 min, hold to 9 min.). The oil that formed was extracted with EtOAc (3×25 mL) The organic layer was dried (MgSO4) filtered evaporated to a dark red oil purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities to elute 59 mg of product The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-{[6-(3-chloro-4-(2-pyridyl)methoxyphenylamino)-pyrimidin-4-ylamino]phenylamine (IR-9) was dissolved in N-methylpyrrolidinone (1.2 mL) and added dropwise over 10 minutes to the ice-cold solution of (E)-4-(dimethylamino)but-2-enoyl chloride hydrochloride in acetonitrile. The reaction was stirred in an ice bath for 2 hr. To the mixture was added sodium bicarbonate to pH greater than 9. The oil that formed was extracted with EtOAc (3×25 mL). A portion of the material was insoluble and set aside. The organic layer was dried (MgSO4) filtered and evaporated to a dark red oil. Both oils contained substantial amount of product as shown by TLC:SiO2 CHCl3:MeOH/NH4OH (8:1) 19:1. The oils were combined and purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities followed by 10% methanol/ammonium hydroxide 8/1 to elute 59 mg of product. The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1 to give the title compound (16.3 mg, 0.03 mmol, 6.4% yield). MS (ES+) 530 (M+): 552, (M+Na); 1H NMR (DMSO-d6, 500 MHz) δ (ppm): 10.04 (s, 1H), 9.19 (s, 1H), 9.14 (s, 1H), 8.60 (s, 1H), 8.27 (s, 1H), 7.88 (s, 2H), 7.57 (s, 1H), 7.36 (d, 1H, J=7.4 Hz), 7.29 (d, 2H, J=7.8 Hz), 7.22 (d, 2H, J=7.9 Hz), 7.18 (m, 2H), 6.74 (m, 1H), 6.30 (d, 1H, J=15 Hz) 6.10 (s, 1H), 5.24 (s, 2H), 3.06 (s, 2H), 2.18 (s, 6H) ppm; HPLC: tR=5.15 min, 97.5% (YMC-Pack ODS-A 4.6×100 mm, 80% water/20% acetonitrile to 5% water/95% acetonitrile over 5.5 min, hold to 9 min.). The oil that formed was extracted with EtOAc (3×25 mL) The organic layer was dried (MgSO4) filtered evaporated to a dark red oil purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities to elute 59 mg of product The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-{[6-(3-chloro-4-(2-pyridyl)methoxyphenylamino)-pyrimidin-4-ylamino]phenylamine (IR-9) was dissolved in N-methylpyrrolidinone (1.2 mL) and added dropwise over 10 minutes to the ice-cold solution of (E)-4-(dimethylamino)but-2-enoyl chloride hydrochloride in acetonitrile. The reaction was stirred in an ice bath for 2 hr. To the mixture was added sodium bicarbonate to pH greater than 9. The oil that formed was extracted with EtOAc (3×25 mL). A portion of the material was insoluble and set aside. The organic layer was dried (MgSO4) filtered and evaporated to a dark red oil. Both oils contained substantial amount of product as shown by TLC:SiO2 CHCl3:MeOH/NH4OH (8:1) 19:1. The oils were combined and purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities followed by 10% methanol/ammonium hydroxide 8/1 to elute 59 mg of product. The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1 to give the title compound (16.3 mg, 0.03 mmol, 6.4% yield). MS (ES+) 530 (M+): 552, (M+Na); 1H NMR (DMSO-d6, 500 MHz) δ (ppm): 10.04 (s, 1H), 9.19 (s, 1H), 9.14 (s, 1H), 8.60 (s, 1H), 8.27 (s, 1H), 7.88 (s, 2H), 7.57 (s, 1H), 7.36 (d, 1H, J=7.4 Hz), 7.29 (d, 2H, J=7.8 Hz), 7.22 (d, 2H, J=7.9 Hz), 7.18 (m, 2H), 6.74 (m, 1H), 6.30 (d, 1H, J=15 Hz) 6.10 (s, 1H), 5.24 (s, 2H), 3.06 (s, 2H), 2.18 (s, 6H) ppm; HPLC: tR=5.15 min, 97.5% (YMC-Pack ODS-A 4.6×100 mm, 80% water/20% acetonitrile to 5% water/95% acetonitrile over 5.5 min, hold to 9 min.). The oil that formed was extracted with EtOAc (3×25 mL) The organic layer was dried (MgSO4) filtered evaporated to a dark red oil purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities to elute 59 mg of product The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-{[6-(3-chloro-4-(2-pyridyl) methoxyphenylamino)-pyrimidin-4-ylamino]phenylamine (IR-9) was dissolved in N-methylpyrrolidinone (1.2 mL) and added dropwise over 10 minutes to the ice-cold solution of (E)-4-(dimethylamino)but-2-enoyl chloride hydrochloride in acetonitrile. The reaction was stirred in an ice bath for 2 hr. To the mixture was added sodium bicarbonate to pH greater than 9. The oil that formed was extracted with EtOAc (3×25 mL). A portion of the material was insoluble and set aside. The organic layer was dried (MgSO4) filtered and evaporated to a dark red oil. Both oils contained substantial amount of product as shown by TLC: SiO2CHCl3:MeOH/NH4OH (8:1) 19:1. The oils were combined and purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities followed by 10% methanol/ammonium hydroxide 8/1 to elute 59 mg of product. The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1 to give the title compound (16.3 mg, 0.03 mmol, 6.4% yield). MS (ES+) 530 (M+): 552, (M+Na); 1H NMR (DMSO-d6, 500 MHz) δ (ppm): 10.04 (s, 1H), 9.19 (s, 1H), 9.14 (s, 1H), 8.60 (s, 1H), 8.27 (s, 1H), 7.88 (s, 2H), 7.57 (s, 1H), 7.36 (d, 1H, J=7.4 Hz), 7.29 (d, 2H, J=7.8 Hz), 7.22 (d, 2H, J=7.9 Hz), 7.18 (m, 2H), 6.74 (m, 1H), 6.30 (d, 1H, J=15 Hz) 6.10 (s, 1H), 5.24 (s, 2H), 3.06 (s, 2H), 2.18 (s, 6H) ppm; HPLC: tR=5.15 min, 97.5% (YMC-Pack ODS-A 4.6×100 mm, 80% water/20% acetonitrile to 5% water/95% acetonitrile over 5.5 min, hold to 9 min.). The oil that formed was extracted with EtOAc (3×25 mL) The organic layer was dried (MgSO4) filtered evaporated to a dark red oil purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities to elute 59 mg of product The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-{[6-(3-chloro-4-(2-pyridyl) methoxyphenylamino)-pyrimidin-4-ylamino]phenylamine (IR-9) was dissolved in N-methylpyrrolidinone (1.2 mL) and added dropwise over 10 minutes to the ice-cold solution of (E)-4-(dimethylamino)but-2-enoyl chloride hydrochloride in acetonitrile. The reaction was stirred in an ice bath for 2 hr. To the mixture was added sodium bicarbonate to pH greater than 9. The oil that formed was extracted with EtOAc (3×25 mL). A portion of the material was insoluble and set aside. The organic layer was dried (MgSO4) filtered and evaporated to a dark red oil. Both oils contained substantial amount of product as shown by TLC: SiO2CHCl3:MeOH/NH4OH (8:1) 19:1. The oils were combined and purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities followed by 10% methanol/ammonium hydroxide 8/1 to elute 59 mg of product. The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1 to give the title compound (16.3 mg, 0.03 mmol, 6.4% yield). MS (ES+) 530 (M+): 552, (M+Na); 1H NMR (DMSO-d6, 500 MHz) δ (ppm): 10.04 (s, 1H), 9.19 (s, 1H), 9.14 (s, 1H), 8.60 (s, 1H), 8.27 (s, 1H), 7.88 (s, 2H), 7.57 (s, 1H), 7.36 (d, 1H, J=7.4 Hz), 7.29 (d, 2H, J=7.8 Hz), 7.22 (d, 2H, J=7.9 Hz), 7.18 (m, 2H), 6.74 (m, 1H), 6.30 (d, 1H, J=15 Hz) 6.10 (s, 1H), 5.24 (s, 2H), 3.06 (s, 2H), 2.18 (s, 6H) ppm; HPLC: tR=5.15 min, 97.5% (YMC-Pack ODS-A 4.6×100 mm, 80% water/20% acetonitrile to 5% water/95% acetonitrile over 5.5 min, hold to 9 min.). The oil that formed was extracted with EtOAc (3×25 mL) The organic layer was dried (MgSO4) filtered evaporated to a dark red oil purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities to elute 59 mg of product The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1

反应条件: temp:22.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A well stirred suspension 4-dimethylaminocrotonic acid hydrochloride (5.0 g, 30 mmol) in cold (0° C.) THF (40 mL) and DMF (2 pipet drops) was treated with oxalyl chloride (3.15 mL, 36 mmol). The mixture was stirred at 20-25° C. for 3 h then cooled to 0° C. and held for 30 min. The solids were collected on Buchner funnel (under a blanket of nitrogen) and washed with cold (0° C.) THF (3×5 mL). The product was dried under vacuum (˜1 torr) at 40-50 2° C. for 3 h to give 4.0 g of 4-dimethylaminocrotonoyl chloride hydrochloride. This material is characterized as its methyl ester by treatment of the solid with methanol. then cooled to 0° C. held for 30 min The solids were collected on Buchner funnel (under a blanket of nitrogen) and washed with cold (0° C.) THF (3×5 mL) The product was dried under vacuum (˜1 torr) at 40-50 2° C. for 3 h

反应条件: temp:22.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A well stirred suspension 4-dimethylaminocrotonic acid hydrochloride (5.0 g, 30 mmol) in cold (0° C.) THF (40 mL) and DMF (2 pipet drops) was treated with oxalyl chloride (3.15 mL, 36 mmol). The mixture was stirred at 20-25° C. for 3 h then cooled to 0° C. and held for 30 min. The solids were collected on Buchner funnel (under a blanket of nitrogen) and washed with cold (0° C.) THF (3×5 mL). The product was dried under vacuum (˜1 torr) at 40-50 2° C. for 3 h to give 4.0 g of 4-dimethylaminocrotonoyl chloride hydrochloride. This material is characterized as its methyl ester by treatment of the solid with methanol. then cooled to 0° C. held for 30 min The solids were collected on Buchner funnel (under a blanket of nitrogen) and washed with cold (0° C.) THF (3×5 mL) The product was dried under vacuum (˜1 torr) at 40-50 2° C. for 3 h

反应条件: temp:22.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A well stirred suspension 4-dimethylaminocrotonic acid hydrochloride (5.0 g, 30 mmol) in cold (0° C.) THF (40 mL) and DMF (2 pipet drops) was treated with oxalyl chloride (3.15 mL, 36 mmol). The mixture was stirred at 20-25° C. for 3 h then cooled to 0° C. and held for 30 min. The solids were collected on Buchner funnel (under a blanket of nitrogen) and washed with cold (0° C.) THF (3×5 mL). The product was dried under vacuum (˜1 torr) at 40-50 2° C. for 3 h to give 4.0 g of 4-dimethylaminocrotonoyl chloride hydrochloride. This material is characterized as its methyl ester by treatment of the solid with methanol. then cooled to 0° C. held for 30 min The solids were collected on Buchner funnel (under a blanket of nitrogen) and washed with cold (0° C.) THF (3×5 mL) The product was dried under vacuum (˜1 torr) at 40-50 2° C. for 3 h

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-{[6-(3-chloro-4-(2-pyridyl)methoxyphenylamino)-pyrimidin-4-ylamino]phenylamine (IR-9) was dissolved in N-methylpyrrolidinone (1.2 mL) and added dropwise over 10 minutes to the ice-cold solution of (E)-4-(dimethylamino)but-2-enoyl chloride hydrochloride in acetonitrile. The reaction was stirred in an ice bath for 2 hr. To the mixture was added sodium bicarbonate to pH greater than 9. The oil that formed was extracted with EtOAc (3×25 mL). A portion of the material was insoluble and set aside. The organic layer was dried (MgSO4) filtered and evaporated to a dark red oil. Both oils contained substantial amount of product as shown by TLC: SiO2 CHCl3:MeOH/NH4OH (8:1) 19:1. The oils were combined and purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities followed by 10% methanol/ammonium hydroxide 8/1 to elute 59 mg of product. The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1 to give the title compound (16.3 mg, 0.03 mmol, 6.4% yield). MS (ES+) 530 (M+): 552, (M+Na); 1H NMR (DMSO-d6, 500 MHz) δ (ppm): 10.04 (s, 1H), 9.19 (s, 1H), 9.14 (s, 1H), 8.60 (s, 1H), 8.27 (s, 1H), 7.88 (s, 2H), 7.57 (s, 1H), 7.36 (d, 1H, J=7.4 Hz), 7.29 (d, 2H, J=7.8 Hz), 7.22 (d, 2H, J=7.9 Hz), 7.18 (m, 2H), 6.74 (m, 1H), 6.30 (d, 1H, J=15 Hz) 6.10 (s, 1H), 5.24 (s, 2H), 3.06 (s, 2H), 2.18 (s, 6H) ppm; HPLC: tR=5.15 min, 97.5% (YMC-Pack ODS-A 4.6×100 mm, 80% water/20% acetonitrile to 5% water/95% acetonitrile over 5.5 min, hold to 9 min.). The oil that formed was extracted with EtOAc (3×25 mL) The organic layer was dried (MgSO4) filtered evaporated to a dark red oil purified by flash column chromatography silica gel (25×300 mm) eluted first with 5% methanol/ammonium hydroxide 8/1 to remove non-polar impurities to elute 59 mg of product The sample was further purified by a second flash column chromatography silica gel (25×250 mm) eluted with 10% methanol/ammonium hydroxide 8/1