2,3,5,6-四氟苯甲腈

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 100 g of ethylbenzene and 3.0 g of 5% palladium/activated carbon were added to a 1000 cc stainless steel autoclave. The gas phase was sufficiently replaced with hydrogen gas, then hydrogen gas was used to apply a pressure of 0.3 MPa and make the temperature 100° C. and catalytic pretreatment was carried out for 1 hour. The gas phase was again sufficiently replaced with nitrogen, then 3.0 g of the reaction material, that is, 2,3,5,6-tetrafluoroterephthalonitrile was added. The nitrogen atmosphere was maintained, the autoclave sealed as it was at atmospheric pressure, and the temperature held at 175° C. After 3 hours, the reaction solution was analyzed by gas chromatography, whereupon the conversion of 2,3,5,6-tetrafluoroterephthalonitrile was found to be 100% and the yield of 2,3,5,6-tetrafluorobenzonitrile (based on 2,3,5,6-tetrafluoroterephthalonitrile) was 95%. At the same time, 13.4 mmol of α-methylbenzylcyanide was produced. This corresponded to 0.95 times molar amount relative to the production of 2,3,5,6-tetrafluorobenzonitrile. the temperature 100° C. and catalytic pretreatment The nitrogen atmosphere was maintained the autoclave sealed as it held at 175° C After 3 hours

反应条件: temp:190.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 200 g of ethylbenzene, 0.30 g of 5% palladium/activated carbon, and 6.0 g of 2,3,5,6-tetrafluoroterephthalonitrile were added to a 1000 cc stainless steel autoclave in a nitrogen atmosphere. The gas phase was sufficiently replaced with a mixed gas of 41 vol % hydrogen and 59 vol % nitrogen, then the mixed gas was used to keep the pressure at 0.23 MPa and the temperature was maintained at 190° C. After 2, 4, and 6 hours, the reaction solution was analyzed by gas chromatography, whereupon the conversions of 2,3,5,6-tetrafluoroterephthalonitrile were found to be 23, 62, and 99% and the yields of 2,3,5,6-tetrafluorobenzonitrile (based on 2,3,5,6-tetrafluoroterephthalonitrile) were 22, 56, and 87%, respectively. After 2, 4, and 6 hours

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 100 g of ethylbenzene and 3.0 g of 5% palladium/activated carbon were added to a 1000 cc stainless steel autoclave. The gas phase was sufficiently replaced with hydrogen gas, then hydrogen gas was used to apply a pressure of 0.3 MPa and make the temperature 100° C. and catalytic pretreatment was carried out for 1 hour. The gas phase was again sufficiently replaced with nitrogen, then 3.0 g of the reaction material, that is, 2,3,5,6-tetrafluoroterephthalonitrile was added. The nitrogen atmosphere was maintained, the autoclave sealed as it was at atmospheric pressure, and the temperature held at 175° C. After 3 hours, the reaction solution was analyzed by gas chromatography, whereupon the conversion of 2,3,5,6-tetrafluoroterephthalonitrile was found to be 100% and the yield of 2,3,5,6-tetrafluorobenzonitrile (based on 2,3,5,6-tetrafluoroterephthalonitrile) was 95%. At the same time, 13.4 mmol of α-methylbenzylcyanide was produced. This corresponded to 0.95 times molar amount relative to the production of 2,3,5,6-tetrafluorobenzonitrile. the temperature 100° C. and catalytic pretreatment The nitrogen atmosphere was maintained the autoclave sealed as it held at 175° C After 3 hours

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 100 g of ethylbenzene and 3.0 g of 5% palladium/activated carbon were added to a 1000 cc stainless steel autoclave. The gas phase was sufficiently replaced with hydrogen gas, then hydrogen gas was used to apply a pressure of 0.3 MPa and make the temperature 100° C. and catalytic pretreatment was carried out for 1 hour. The gas phase was again sufficiently replaced with nitrogen, then 3.0 g of the reaction material, that is, 2,3,5,6-tetrafluoroterephthalonitrile was added. The nitrogen atmosphere was maintained, the autoclave sealed as it was at atmospheric pressure, and the temperature held at 175° C. After 3 hours, the reaction solution was analyzed by gas chromatography, whereupon the conversion of 2,3,5,6-tetrafluoroterephthalonitrile was found to be 100% and the yield of 2,3,5,6-tetrafluorobenzonitrile (based on 2,3,5,6-tetrafluoroterephthalonitrile) was 95%. At the same time, 13.4 mmol of α-methylbenzylcyanide was produced. This corresponded to 0.95 times molar amount relative to the production of 2,3,5,6-tetrafluorobenzonitrile. the temperature 100° C. and catalytic pretreatment The nitrogen atmosphere was maintained the autoclave sealed as it held at 175° C After 3 hours

反应条件: temp:190.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 200 g of ethylbenzene, 0.30 g of 5% palladium/activated carbon, and 6.0 g of 2,3,5,6-tetrafluoroterephthalonitrile were added to a 1000 cc stainless steel autoclave in a nitrogen atmosphere. The gas phase was sufficiently replaced with a mixed gas of 41 vol % hydrogen and 59 vol % nitrogen, then the mixed gas was used to keep the pressure at 0.23 MPa and the temperature was maintained at 190° C. After 2, 4, and 6 hours, the reaction solution was analyzed by gas chromatography, whereupon the conversions of 2,3,5,6-tetrafluoroterephthalonitrile were found to be 23, 62, and 99% and the yields of 2,3,5,6-tetrafluorobenzonitrile (based on 2,3,5,6-tetrafluoroterephthalonitrile) were 22, 56, and 87%, respectively. After 2, 4, and 6 hours

反应条件: temp:0.00; pressure:0.00; stir: