苄基 2-[(4S)-2-氧代-1,3-恶唑烷-4-基]乙酸甲酯

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Methylmagnesium bromide (227 mL of 3M solution in diethyl ether) was added to a mixture of toluene (340 mL) and THF (340 mL) at −20° C. A warm THF solution (170 mL) of the ester from Step 2 (40 g) was then added dropwise maintaining the temperature below −10° C. The mixture was aged for 2 hours and was then slowly added to a mixture of water (1000 mL) and acetic acid (200 mL) and the resultant mixture was stirred for 2 hours at room temperature. The aqueous layer was separated and the organic layer was extracted with water (2×200 mL). The product was extracted from the combined aqueous layers using dichloromethane and a continuous extractor. The dichloromethane extract was evaporated to dryness using heptane as a co-solvent to azeotrope off the acetic acid. The residue was purified by chromatography on SiO2 using ethanol and dichloromethane (1:30) to yield (4S)-4-(2-hydroxy-2-methylpropyl)-1,3-oxazolidin-2-one. maintaining the temperature below −10° C The aqueous layer was separated the organic layer was extracted with water (2×200 mL) The product was extracted from the combined aqueous layers The dichloromethane extract was evaporated to dryness The residue was purified by chromatography on SiO2

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Methylmagnesium bromide (227 mL of 3M solution in diethyl ether) was added to a mixture of toluene (340 mL) and THF (340 mL) at −20° C. A warm THF solution (170 mL) of the ester from Step 2 (40 g) was then added dropwise maintaining the temperature below −10° C. The mixture was aged for 2 hours and was then slowly added to a mixture of water (1000 mL) and acetic acid (200 mL) and the resultant mixture was stirred for 2 hours at room temperature. The aqueous layer was separated and the organic layer was extracted with water (2×200 mL). The product was extracted from the combined aqueous layers using dichloromethane and a continuous extractor. The dichloromethane extract was evaporated to dryness using heptane as a co-solvent to azeotrope off the acetic acid. The residue was purified by chromatography on SiO2 using ethanol and dichloromethane (1:30) to yield (4S)-4-(2-hydroxy-2-methylpropyl)-1,3-oxazolidin-2-one. maintaining the temperature below −10° C The aqueous layer was separated the organic layer was extracted with water (2×200 mL) The product was extracted from the combined aqueous layers The dichloromethane extract was evaporated to dryness The residue was purified by chromatography on SiO2

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of the alcohol (95.7 g) from Step 1 in dichloroethane (925 mL) was added pyridine (625 mL) and the mixture was cooled to 0-5° C. Anhydrous p-toluenesulfonic anhydride (105.7 g) was added and the mixture was warmed to room temperature and stirred for 1 hour and then heated to 90° C. for 2 hours. The mixture was cooled, diluted with dichloromethane (1000 mL) and washed with 1N HCl (3×600 mL). The organic layer was washed with brine, dried with sodium sulfate and the solvents were removed in vacuo. The residue was purified by chromatography on SiO2 using ethyl acetate and hexanes in a 1:1 ratio followed by ethyl acetate to yield benzyl [(4S)-2-oxo-1,3-oxazolidin-4-yl]acetate. the mixture was warmed to room temperature heated to 90° C. for 2 hours The mixture was cooled washed with 1N HCl (3×600 mL) The organic layer was washed with brine dried with sodium sulfate the solvents were removed in vacuo The residue was purified by chromatography on SiO2

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of sodium bis(trimethylsilyl)amide (1M in THF; 68.0 mL) under argon atmosphere was added THF (40.4 mL). The mixture was cooled to −78° C. and a solution of (S)-benzyl 2-(2-oxooxazolidin-4-yl)acetate (7.80 g, 33.2 mmol) in THF (85 mL) was added slowly over ˜15 min. The mixture was stirred for 1 hr at −78° C. and a solution of iodomethane (4.25 mL, 68.0 mmol) in THF (40.4 mL) was added slowly over ˜10 min. The reaction mixture was stirred for 1 hr at −78° C. and ˜1 hr at −40° C. The mixture was quenched with saturated aqueous ammonium chloride solution (˜100 mL) and allowed to warm to room temperature. The mixture was extracted with DCM (3×). The combined organic layers were dried over sodium sulfate, filtered off and concentrated under reduced pressure. The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane] to provide (R)-benzyl 2-((S)-2-oxooxazolidin-4-yl)propanoate (7.47 g) as a colorless oil. MS m/z 250.1 (M+H)+; Rt-0.65 min. 1H NMR (400 Mhz, DMSO-d6) δ ppm 7.85 (s, 1H), 7.44-7.28 (m, 5H), 5.10 (s, 2H), 4.36 (t, J=1.0 Hz, 1H), 4.11 (dd, J=5.4, 8.9 Hz, 1H), 4.06-3.98 (m, 1H), 2.69 (quin, J=6.9 Hz, 1H), 1.08 (d, J=7.1 Hz, 3H). The reaction mixture was stirred for 1 hr at −78° C. and ˜1 hr at −40° C The mixture was quenched with saturated aqueous ammonium chloride solution (˜100 mL) to warm to room temperature The mixture was extracted with DCM (3×) The combined organic layers were dried over sodium sulfate filtered off concentrated under reduced pressure The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane]

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of (S)-benzyl 3-((tert-butoxycarbonyl)amino)-4-hydroxybutanoate (16.3 g, 52.7 mmol) and pyridine (10.65 ml, 132 mmol) in DCE (157 mL) at 0° C. was added p-toluenesulfonic anhydride (17.10 g, 52.4 mmol) in two portions over 5 min. The mixture was stirred for a few minutes, then allowed to warm to room temperature and stirred for 1 hr. The mixture was heated for 6 hr at 92° C. and then allowed to cool to room temperature. The mixture was diluted with DCM (80 mL), washed with 1N aqueous HCl solution (2×200 mL), brine (200 mL), and saturated aqueous sodium bicarbonate solution (100 mL). The organic layer was dried over sodium sulfate, filtered off and concentrated under reduced pressure. The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane=5/95 to 75/25] to provide (S)-benzyl 2-(2-oxooxazolidin-4-yl)acetate (10.0 g) as a white solid. MS m/z 236.2 (M+H)+; Rt-0.59 min. stirred for 1 hr The mixture was heated for 6 hr at 92° C. to cool to room temperature washed with 1N aqueous HCl solution (2×200 mL), brine (200 mL), and saturated aqueous sodium bicarbonate solution (100 mL) The organic layer was dried over sodium sulfate filtered off concentrated under reduced pressure The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane=5/95 to 75/25]

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of sodium bis(trimethylsilyl)amide (1M in THF; 68.0 mL) under argon atmosphere was added THF (40.4 mL). The mixture was cooled to −78° C. and a solution of (S)-benzyl 2-(2-oxooxazolidin-4-yl)acetate (7.80 g, 33.2 mmol) in THF (85 mL) was added slowly over ˜15 min. The mixture was stirred for 1 hr at −78° C. and a solution of iodomethane (4.25 mL, 68.0 mmol) in THF (40.4 mL) was added slowly over ˜10 min. The reaction mixture was stirred for 1 hr at −78° C. and ˜1 hr at −40° C. The mixture was quenched with saturated aqueous ammonium chloride solution (˜100 mL) and allowed to warm to room temperature. The mixture was extracted with DCM (3×). The combined organic layers were dried over sodium sulfate, filtered off and concentrated under reduced pressure. The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane] to provide (R)-benzyl 2-((S)-2-oxooxazolidin-4-yl)propanoate (7.47 g) as a colorless oil. MS m/z 250.1 (M+H)+; Rt-0.65 min. 1H NMR (400 Mhz, DMSO-d6) δ ppm 7.85 (s, 1H), 7.44-7.28 (m, 5H), 5.10 (s, 2H), 4.36 (t, J=1.0 Hz, 1H), 4.11 (dd, J=5.4, 8.9 Hz, 1H), 4.06-3.98 (m, 1H), 2.69 (quin, J=6.9 Hz, 1H), 1.08 (d, J=7.1 Hz, 3H). The reaction mixture was stirred for 1 hr at −78° C. and ˜1 hr at −40° C The mixture was quenched with saturated aqueous ammonium chloride solution (˜100 mL) to warm to room temperature The mixture was extracted with DCM (3×) The combined organic layers were dried over sodium sulfate filtered off concentrated under reduced pressure The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane]

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of (S)-benzyl 3-((tert-butoxycarbonyl)amino)-4-hydroxybutanoate (16.3 g, 52.7 mmol) and pyridine (10.65 ml, 132 mmol) in DCE (157 mL) at 0° C. was added p-toluenesulfonic anhydride (17.10 g, 52.4 mmol) in two portions over 5 min. The mixture was stirred for a few minutes, then allowed to warm to room temperature and stirred for 1 hr. The mixture was heated for 6 hr at 92° C. and then allowed to cool to room temperature. The mixture was diluted with DCM (80 mL), washed with 1N aqueous HCl solution (2×200 mL), brine (200 mL), and saturated aqueous sodium bicarbonate solution (100 mL). The organic layer was dried over sodium sulfate, filtered off and concentrated under reduced pressure. The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane=5/95 to 75/25] to provide (S)-benzyl 2-(2-oxooxazolidin-4-yl)acetate (10.0 g) as a white solid. MS m/z 236.2 (M+H)+; Rt-0.59 min. stirred for 1 hr The mixture was heated for 6 hr at 92° C. to cool to room temperature washed with 1N aqueous HCl solution (2×200 mL), brine (200 mL), and saturated aqueous sodium bicarbonate solution (100 mL) The organic layer was dried over sodium sulfate filtered off concentrated under reduced pressure The residue was purified by column chromatography [SiO2, 220 g, EtOAc/heptane=5/95 to 75/25]

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Methylmagnesium bromide (227 mL of 3M solution in diethyl ether) was added to a mixture of toluene (340 mL) and THF (340 mL) at −20° C. A warm THF solution (170 mL) of the ester from Step 8 (40 g) was then added dropwise maintaining the temperature below −10° C. The mixture was aged for 2 hours and was then slowly added to a mixture of water (1000 mL) and acetic acid (200 mL) and the resultant mixture was stirred for 2 hours at room temperature. The aqueous layer was separated and the organic layer was extracted with water (2×200 mL). The product was extracted from the combined aqueous layers using dichloromethane and a continuous extractor. The dichloromethane extract was evaporated to dryness using heptane as a co-solvent to azeotrope off the acetic acid. The residue was purified by chromatography on SiO2 using ethanol and dichloromethane (1:30) to yield (4S)-4-(2-hydroxy-2-methylpropyl)-1,3-oxazolidin-2-one. maintaining the temperature below −10° C The aqueous layer was separated the organic layer was extracted with water (2×200 mL) The product was extracted from the combined aqueous layers The dichloromethane extract was evaporated to dryness The residue was purified by chromatography on SiO2

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Methylmagnesium bromide (227 mL of 3M solution in diethyl ether) was added to a mixture of toluene (340 mL) and THF (340 mL) at −20° C. A warm THF solution (170 mL) of the ester from Step 8 (40 g) was then added dropwise maintaining the temperature below −10° C. The mixture was aged for 2 hours and was then slowly added to a mixture of water (1000 mL) and acetic acid (200 mL) and the resultant mixture was stirred for 2 hours at room temperature. The aqueous layer was separated and the organic layer was extracted with water (2×200 mL). The product was extracted from the combined aqueous layers using dichloromethane and a continuous extractor. The dichloromethane extract was evaporated to dryness using heptane as a co-solvent to azeotrope off the acetic acid. The residue was purified by chromatography on SiO2 using ethanol and dichloromethane (1:30) to yield (4S)-4-(2-hydroxy-2-methylpropyl)-1,3-oxazolidin-2-one. maintaining the temperature below −10° C The aqueous layer was separated the organic layer was extracted with water (2×200 mL) The product was extracted from the combined aqueous layers The dichloromethane extract was evaporated to dryness The residue was purified by chromatography on SiO2

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of the alcohol (95.7 g) from Step 7 in dichloroethane (925 mL) was added pyridine (625 mL) and the mixture was cooled to 0-5° C. Anhydrous p-toluenesulfonic anhydride (105.7 g) was added and the mixture was warmed to room temperature and stirred for 1 hour and then heated to 90° C. for 2 hours. The mixture was cooled, diluted with dichloromethane (1000 mL) and washed with 1N HCl (3×600 mL). The organic layer was washed with brine, dried with sodium sulfate and the solvents were removed in vacuo. The residue was purified by chromatography on SiO2 using ethyl acetate and hexanes in a 1:1 ratio followed by ethyl acetate to yield benzyl [(4S)-2-oxo-1,3-oxazolidin-4-yl]acetate. the mixture was warmed to room temperature heated to 90° C. for 2 hours The mixture was cooled washed with 1N HCl (3×600 mL) The organic layer was washed with brine dried with sodium sulfate the solvents were removed in vacuo The residue was purified by chromatography on SiO2

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of the alcohol (95.7 g) from Step 7 in dichloroethane (925 mL) was added pyridine (625 mL) and the mixture was cooled to 0-5° C. Anhydrous p-toluenesulfonic anhydride (105.7 g) was added and the mixture was warmed to room temperature and stirred for 1 hour and then heated to 90° C. for 2 hours. The mixture was cooled, diluted with dichloromethane (1000 mL) and washed with 1N HCl (3×600 mL). The organic layer was washed with brine, dried with sodium sulfate and the solvents were removed in vacuo. The residue was purified by chromatography on SiO2 using ethyl acetate and hexanes in a 1:1 ratio followed by ethyl acetate to yield benzyl [(4S)-2-oxo-1,3-oxazolidin-4-yl]acetate. the mixture was warmed to room temperature heated to 90° C. for 2 hours The mixture was cooled washed with 1N HCl (3×600 mL) The organic layer was washed with brine dried with sodium sulfate the solvents were removed in vacuo The residue was purified by chromatography on SiO2

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of the alcohol (95.7 g) from Step 7 in dichloroethane (925 mL) was added pyridine (625 mL) and the mixture was cooled to 0-5° C. Anhydrous p-toluenesulfonic anhydride (105.7 g) was added and the mixture was warmed to room temperature and stirred for 1 hour and then heated to 90° C. for 2 hours. The mixture was cooled, diluted with dichloromethane (1000 mL) and washed with 1N HCl (3×600 mL). The organic layer was washed with brine, dried with sodium sulfate and the solvents were removed in vacuo. The residue was purified by chromatography on SiO2 using ethyl acetate and hexanes in a 1:1 ratio followed by ethyl acetate to yield benzyl [(4S)-2-oxo-1,3-oxazolidin-4-yl]acetate. the mixture was warmed to room temperature heated to 90° C. for 2 hours The mixture was cooled washed with 1N HCl (3×600 mL) The organic layer was washed with brine dried with sodium sulfate the solvents were removed in vacuo The residue was purified by chromatography on SiO2