3-辛醇

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: BM 2: 500 parts of an epoxy resin based on Bisphenol A and epichlorohydrin (epoxy equivalent weight about 500) are dissolved in 214 parts propyleneglycol monomethylether and reacted at 110° C. with 83 parts of a semiester of phthalic acid anhydride and 2 ethylhexanol, in the presence of 0.5 parts of triethylamine as catalyst, to an acid value of below 3 mg KOH/g. Then, 120 parts of an NH-functional oxazolidine of aminoethylethanolamine, 2-ethylhexylacrylate and formaldehyde, and 26 parts diethylaminopropylamine are added and the batch is reacted at 80° C. to an epoxy value of practically zero. The batch is diluted with 200 parts propyleneglycol monomethylether. 70 parts (resin solids) of this oxazolidine modified epoxy resin amine adduct are homogenized for 30 minutes at 50° C. with 30 parts based on resin solids of a crosslinking component obtained through reaction of 1 mole of a toluylene diisocyanate semi-blocked with 2-ethylhexanol and 0.33 moles triethanolamine. The reaction is carried out in a 70% solution of diethyleneglycol dimethylether, at 50 to 60° C. until all isocyanate groups have reacted.

反应条件: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To 8 ml (23 g, 85.3 mmol) of phosphorus tribromide was added dropwise 15 g (115.4 mmol) of 3-octanol over a 1/2 hr period. The resulting solution was heated at 100° C. (oil bath) for 2 hr, after which time the reaction mixture was cooled and poured into 200 ml ice-water which was extracted with CHCl3 (3×120 ml). The combined organic extracts were washed with 5% Na2S2O3 (2×200 ml), H2O (200 ml), sat'd aq. NaHCO3 (2×200 ml), H2O (200 ml), and sat'd aq. NaCl (200 ml), and dried over MgSO4. After the removal of the solvent under reduced pressure, the residue was distilled (bp 78°-80° C./18 Torr, lit. bp 84.4°-85.1° C./20 Torr (18)) to give 17.5 g (78.58%) of pure 3-bromooctane which exhibited C-Br band at 797 cm-1 in the IR spectrum (18). NMR(CDCl3): δ1.0 (6H, t, CH3), δ1.31 (6H, broad singlet, --CH2), δ1.75 (4H, q, ##STR13## δ3.90 (1H, m, >CHBr). after which time the reaction mixture was cooled was extracted with CHCl3 (3×120 ml) The combined organic extracts were washed with 5% Na2S2O3 (2×200 ml), H2O (200 ml) dried over MgSO4 After the removal of the solvent under reduced pressure the residue was distilled (bp 78°-80° C./18 Torr, lit. bp 84.4°-85.1° C./20 Torr (18))

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a well-stirred solution of 19.2 g (0.15 mmol) of 3-octanone in 270 ml of 95% ethanol, cooled in an ice bath, was added in portions a solution of 3.9 g (0.103 mmol) of sodium borohydride in 27 ml of water. Ammonium hydroxide (15M, 27 ml) was added and the ice bath removed and stirring was continued in room temperature for 3 hr. The reaction mixture was concentrated to near dryness and the residue was partitioned between 250 ml each of CHCl3 and H2O. The organic layer was separated and the aqueous layer was extracted with CHCl3 (2×200 ml). The combined extracts were washed with 5% HCl (350 ml), and saturated NaCl solution (350 ml) and dried over MgSO4. After the removal of the solvent, the liquid residue was distilled under reduced pressure (bp 86°-87° C./24 Torr; lit. bp 69.5°-70.4° C./7 Torr (18)) to give 15.41 g (79.02%) of pure 3-octanol. NMR(CDCl3): δ0.93 (6H, t, CH3), δ1.37 (10H, broad multiplet, --CH2 --), δ2.35 (1H, broad singlet, exchangeable with D2O and shift to low field in pyridine, --OH), δ3.47 (1H, m, >CHO--). the ice bath removed The reaction mixture was concentrated the residue was partitioned between 250 ml each of CHCl3 and H2O The organic layer was separated the aqueous layer was extracted with CHCl3 (2×200 ml) The combined extracts were washed with 5% HCl (350 ml), and saturated NaCl solution (350 ml) dried over MgSO4 After the removal of the solvent the liquid residue was distilled under reduced pressure (bp 86°-87° C./24 Torr; lit. bp 69.5°-70.4° C./7 Torr (18))

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Using a procedure analogous to that of Example 1, 81 g (0.522 mol) of 3-octanol is reacted with 62.1 g (0.337 mol) of cyanuric chloride over a period of 9 hours at a reaction temperature of 70° C. The liquid reaction phase after extraction with sodium hydroxide has the following composition: The liquid reaction phase after extraction with sodium hydroxide

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A further selective hydroxylation reaction was carried out with the sol-gel-embedded CYP BM-3 on the substrate n-octane. 79% of the precursor were hydroxylated. The regio isomers 2-octanol, 3-octanol and 4-octanol were obtained in a molar ratio of 1:2.1:1.6 (detected by gas chromatography). A further selective hydroxylation reaction

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A further selective hydroxylation reaction was carried out with the sol-gel-embedded CYP BM-3 on the substrate n-octane. 79% of the precursor were hydroxylated. The regio isomers 2-octanol, 3-octanol and 4-octanol were obtained in a molar ratio of 1:2.1:1.6 (detected by gas chromatography). A further selective hydroxylation reaction

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3 g of catalyst A (3% Ru/SiO2) were placed in a 300 ml pressure reactor. The reactor was subsequently charged with 150 ml of a 33% strength solution of 2-ethylhexanal in THF. The hydrogenation was carried out at 130° C. and a pressure of 250 bar using pure hydrogen. The hydrogenation was continued until no more hydrogen was taken up and the reactor was subsequently vented. After distilling off the solvent, the reaction product was analyzed by gas chromatography. 2-Ethylhexanal had been reacted completely. 99.5% of ethylhexanol were obtained. was carried out at 130° C. After distilling off the solvent 2-Ethylhexanal had been reacted completely

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3 g of catalyst A (3% Ru/SiO2) were placed in a 300 ml pressure reactor. The reactor was subsequently charged with 150 ml of a 33% strength solution of 2-ethylhexanal in THF. The hydrogenation was carried out at 130° C. and a pressure of 250 bar using pure hydrogen. The hydrogenation was continued until no more hydrogen was taken up and the reactor was subsequently vented. After distilling off the solvent, the reaction product was analyzed by gas chromatography. 2-Ethylhexanal had been reacted completely. 99.5% of ethylhexanol were obtained. was carried out at 130° C. After distilling off the solvent 2-Ethylhexanal had been reacted completely

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Under agitation, 339.6 g (1.26 moles) of 99.4% strength 4-n-octylamino-2,2,6,6-tetramethylpiperidine, 7.2 g (0.063 mole) of quadratic acid, and 150 cc of ethylhexanol was heated to boiling with reflux for 2.5 hours in a 1-liter stirred flask with water trap attached thereto; the solid matter was dissolved even before reaching reflux above 150° C. The sump temperature was 220° C. The amount of water removed from the cycle was 2.2 cc. Crystals precipitated from the reaction solution. After washing with petroleum ether and drying, 25.8 g was obtained. Yield: 84.4% of theory, mp 171°-175° C. (from cyclohexane). Extinction (g/l.cm) at 278 nm: 21; at 335 nm: 77. with reflux for 2.5 hours in a 1-liter the solid matter was dissolved even before reaching reflux above 150° C was 220° C The amount of water removed from the cycle Crystals precipitated from the reaction solution After washing with petroleum ether drying 25.8 g was obtained

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Under agitation, 339.6 g (1.26 moles) of 99.4% strength 4-n-octylamino-2,2,6,6-tetramethylpiperidine, 7.2 g (0.063 mole) of quadratic acid, and 150 cc of ethylhexanol was heated to boiling with reflux for 2.5 hours in a 1-liter stirred flask with water trap attached thereto; the solid matter was dissolved even before reaching reflux above 150° C. The sump temperature was 220° C. The amount of water removed from the cycle was 2.2 cc. Crystals precipitated from the reaction solution. After washing with petroleum ether and drying, 25.8 g was obtained. Yield: 84.4% of theory, mp 171°-175° C. (from cyclohexane). Extinction (g/l.cm) at 278 nm: 21; at 335 nm: 77. with reflux for 2.5 hours in a 1-liter the solid matter was dissolved even before reaching reflux above 150° C was 220° C The amount of water removed from the cycle Crystals precipitated from the reaction solution After washing with petroleum ether drying 25.8 g was obtained