3-氧代丁酸 (1R,2S,5R)-5-甲基-2-(1-甲基乙基)环己基酯

反应条件: temp:23.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer, and a glass stopper was charged with t-butyl alcohol (300 mL) and potassium 1-butoxide (68.7 g, 612 mmol, 1.04 equiv). The glass stopper was removed and, with efficient mechanical stirring, (1R,3R,4S)-p-menth-3-yl acetoacetate (1, 150 g, 624 mmol, 1.06 equiv) was added rapidly to the yellow slurry. The open neck of the reaction flask was fitted with a 100-mL addition funnel containing (E)-ethyl crotonate (73.2 mL, 588 mmol, 1 equiv). The largely solid reaction mixture was heated to reflux with a heating mantle. At this point, (E)-ethyl crotonate was added to the refluxing, dark yellow slurry over 15 min via the addition funnel. The addition funnel was replaced with a glass stopper and heating at reflux was continued. Solids were observed to dissolve within 1 h after addition of (E)-ethyl crotonate; the product began to crystallize from solution after about 1.5 h. After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate), heating was discontinued and the reaction mixture was allowed to cool to 23° C. The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL). The aqueous layer was separated and extracted further with two 600-mL portions of dichloromethane. The combined organic layers were dried over sodium sulfate and then were concentrated. The solid residue was dissolved in boiling benzene (ca. 600 mL) and the resulting solution was allowed to cool slowly to 23° C. whereupon (1R,3R,4S)-p-menth-3-yl(1R,2S)-2-methyl-4,6-dioxocyclo-hexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36%). To isolate the diastereomeric diketone product, (1R,3R,4S)-p-menth-3-yl(1S,2R)-2-methyl-4,6-dioxocyclohexanecarboxylate (3), the mother liquors were concentrated and the solid residue was dissolved in boiling ethyl acetate (ca. 200 mL). Hexanes (50 mL) were added to the hot solution and the mixture was allowed to cool to 23° C. Further cooling to -20° C. induced crystallization of diketone diastereomer 3 over a period of 12 h (mp 140°-141° C., 45 g, 25%). ##STR15## A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer was added rapidly to the yellow slurry The open neck of the reaction flask was fitted with a 100-mL addition funnel The largely solid reaction mixture was heated to reflux with a heating mantle heating at reflux to dissolve within 1 h to crystallize from solution after about 1.5 h After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate) heating The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL) The aqueous layer was separated extracted further with two 600-mL portions of dichloromethane The combined organic layers were dried over sodium sulfate were concentrated The solid residue was dissolved to cool slowly to 23° C. whereupon (1R,3R,4S)-p-menth-3-yl(1R,2S)-2-methyl-4,6-dioxocyclo-hexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36%)

反应条件: temp:23.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer, and a glass stopper was charged with t-butyl alcohol (300 mL) and potassium 1-butoxide (68.7 g, 612 mmol, 1.04 equiv). The glass stopper was removed and, with efficient mechanical stirring, (1R,3R,4S)-p-menth-3-yl acetoacetate (1, 150 g, 624 mmol, 1.06 equiv) was added rapidly to the yellow slurry. The open neck of the reaction flask was fitted with a 100-mL addition funnel containing (E)-ethyl crotonate (73.2 mL, 588 mmol, 1 equiv). The largely solid reaction mixture was heated to reflux with a heating mantle. At this point, (E)-ethyl crotonate was added to the refluxing, dark yellow slurry over 15 min via the addition funnel. The addition funnel was replaced with a glass stopper and heating at reflux was continued. Solids were observed to dissolve within 1 h after addition of (E)-ethyl crotonate; the product began to crystallize from solution after about 1.5 h. After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate), heating was discontinued and the reaction mixture was allowed to cool to 23° C. The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL). The aqueous layer was separated and extracted further with two 600-mL portions of dichloromethane. The combined organic layers were dried over sodium sulfate and then were concentrated. The solid residue was dissolved in boiling benzene (ca. 600 mL) and the resulting solution was allowed to cool slowly to 23° C. whereupon (1R,3R,4S)-p-menth-3-yl(1R,2S)-2-methyl-4,6-dioxocyclo-hexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36%). To isolate the diastereomeric diketone product, (1R,3R,4S)-p-menth-3-yl(1S,2R)-2-methyl-4,6-dioxocyclohexanecarboxylate (3), the mother liquors were concentrated and the solid residue was dissolved in boiling ethyl acetate (ca. 200 mL). Hexanes (50 mL) were added to the hot solution and the mixture was allowed to cool to 23° C. Further cooling to -20° C. induced crystallization of diketone diastereomer 3 over a period of 12 h (mp 140°-141° C., 45 g, 25%). ##STR15## A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer was added rapidly to the yellow slurry The open neck of the reaction flask was fitted with a 100-mL addition funnel The largely solid reaction mixture was heated to reflux with a heating mantle heating at reflux to dissolve within 1 h to crystallize from solution after about 1.5 h After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate) heating The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL) The aqueous layer was separated extracted further with two 600-mL portions of dichloromethane The combined organic layers were dried over sodium sulfate were concentrated The solid residue was dissolved to cool slowly to 23° C. whereupon (1R,3R,4S)-p-menth-3-yl(1R,2S)-2-methyl-4,6-dioxocyclo-hexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36%)

反应条件: temp:23.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of (-)-menthol (23.0 g, 147 mmol, 1 equiv) and 1-butyl acetoacetate (20.0 ml, 121 mmol, 0.80 equiv) in toluene (50 mL) was heated at reflux for 12 h, then was cooled to 23° C. Volatiles were removed in vacuo and toluene (20 mL) and 1-butyl acetoacetate (12.2 mL, 73.5 mmol, 0.50 equiv) were added to the residue. The resulting solution was heated at reflux for 12 h, then was cooled to 23° C. The cooled reaction mixture was concentrated in vacuo and the residue was purified by distillation under reduced pressure (bp 90° C., 30 mmHg) to afford (1R,3R,4S)-p-menth-3-yl acetoacetate (1) as a low-melting solid (33.3 g, 94%). ##STR14## at reflux for 12 h were added to the residue The resulting solution was heated at reflux for 12 h was cooled to 23° C The cooled reaction mixture was concentrated in vacuo the residue was purified by distillation under reduced pressure (bp 90° C., 30 mmHg)

反应条件: temp:23.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer, and a glass stopper was charged with t-butyl alcohol (300 mL) and potassium t-butoxide (68.7 g, 612 mmol, 1.04 equiv). The glass stopper was removed and, with efficient mechanical stirring, (1R, 3R, 4S)-p-menth-3-yl acetoacetate (1, 150 g, 624 mmol, 1.06 equiv) was added rapidly to the yellow slurry. The open neck of the reaction flask was fitted with a 100-mL addition funnel containing (E)-ethyl crotonate (73.2 mL, 588 mmol, 1 equiv). The largely solid reaction mixture was heated to reflux with a heating mantle. At this point, (E)-ethyl crotonate was added to the refluxing, dark yellow slurry over 15 min via the addition funnel. The addition funnel was replaced with a glass stopper and heating at reflux was continued. Solids were observed to dissolve within 1 h after addition of (E)-ethyl crotonate; the product began to crystallize from solution after about 1.5 h. After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate), heating was discontinued and the reaction mixture was allowed to cool to 23° C. The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL). The aqueous layer was separated and extracted further with two 600-mL portions of dichloromethane. The combined organic layers were dried over sodium sulfate and then were concentrated. The solid residue was dissolved in boiling benzene (ca. 600 mL) and the resulting solution was allowed to cool slowly to 23° C. whereupon (1R, 3R, 4S)-p-menth-3-yl (1R, 2S)-2-methyl-4,6-dioxocyclohexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36w). To isolate the diastereomeric diketone product, (1R, 3R, 4S)-p-menth-3-yl (1S, 2R)-2-methyl-4,6-dioxocyclohexanecarboxylate (3), the mother liquors were concentrated and the solid residue was dissolved in boiling ethyl acetate (ca. 200 mL). Hexanes (50 mL) were added to the hot solution and the mixture was allowed to cool to 23° C. Further cooling to -20° C. induced crystallization of diketone diastereomer 3 over a period of 12 h (mp 140°-141° C., 45 g, 25%). A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer was added rapidly to the yellow slurry The open neck of the reaction flask was fitted with a 100-mL addition funnel The largely solid reaction mixture was heated to reflux with a heating mantle heating at reflux to dissolve within 1 h to crystallize from solution after about 1.5 h After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate) heating The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL) The aqueous layer was separated extracted further with two 600-mL portions of dichloromethane The combined organic layers were dried over sodium sulfate were concentrated The solid residue was dissolved to cool slowly to 23° C. whereupon (1R, 3R, 4S)-p-menth-3-yl (1R, 2S)-2-methyl-4,6-dioxocyclohexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36w)

反应条件: temp:23.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of (-)-menthol (23.0 g, 147 mmol, 1 equiv) and t-butyl acetoacetate (20.0 mL, 121 mmol, 0.80 equiv) in toluene (50 mL) was heated at reflux for 12 h, then was cooled to 23° C. Volatiles were removed in vacuo and toluene (20 mL) and t-butyl acetoacetate (12.2 mL, 73.5 mmol, 0.50 equiv) were added to the residue. The resulting solution was heated at reflux for 12 h, then was cooled to 23° C. The cooled reaction mixture was concentrated in vacuo and the residue was purified by distillation under reduced pressure (bp 90° C., 30 mmHg) to afford (1R, 3R, 4S)-p-menth-3-yl acetoacetate (1) as a low-melting solid (33.3 g, 94%). at reflux for 12 h were added to the residue The resulting solution was heated at reflux for 12 h was cooled to 23° C The cooled reaction mixture was concentrated in vacuo the residue was purified by distillation under reduced pressure (bp 90° C., 30 mmHg)

反应条件: temp:23.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer, and a glass stopper was charged with t-butyl alcohol (300 mL) and potassium 1-butoxide (68.7 g, 612 mmol, 1.04 equiv). The glass stopper was removed and, with efficient mechanical stirring, (1R,3R,4S)-p-menth-3-yl acetoacetate (1, 150 g, 624 mmol, 1.06 equiv) was added rapidly to the yellow slurry. The open neck of the reaction flask was fitted with a 100-mL addition funnel containing (E)-ethyl crotonate (73.2 mL, 588 mmol, 1 equiv). The largely solid reaction mixture was heated to reflux with a heating mantle. At this point, (E)-ethyl crotonate was added to the refluxing, dark yellow slurry over 15 min via the addition funnel. The addition funnel was replaced with a glass stopper and heating at reflux was continued. Solids were observed to dissolve within 1 h after addition of (E)-ethyl crotonate; the product began to crystallize from solution after about 1.5 h. After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate), heating was discontinued and the reaction mixture was allowed to cool to 23° C. The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL). The aqueous layer was separated and extracted further with two 600-mL portions of dichloromethane. The combined organic layers were dried over sodium sulfate and then were concentrated. The solid residue was dissolved in boiling benzene (ca. 600 mL) and the resulting solution was allowed to cool slowly to 23° C. whereupon (1R,3R,4S)-p-menth-3-yl(1R,2S)-2-methyl-4,6-dioxocyclo-hexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36%). To isolate the diastereomeric diketone product, (1R,3R,4S)-p-menth-3-yl(1S,2R)-2-methyl-4,6-dioxocyclohexanecarboxylate (3), the mother liquors were concentrated and the solid residue was dissolved in boiling ethyl acetate (ca. 200 mL). Hexanes (50 mL) were added to the hot solution and the mixture was allowed to cool to 23° C. Further cooling to -20° C. induced crystallization of diketone diastereomer 3 over a period of 12 h (mp 140°-141° C., 45 g, 25%). ##STR15## A 2-L 3-necked round bottom flask fitted with a reflux condenser, a mechanical stirrer was added rapidly to the yellow slurry The open neck of the reaction flask was fitted with a 100-mL addition funnel The largely solid reaction mixture was heated to reflux with a heating mantle heating at reflux to dissolve within 1 h to crystallize from solution after about 1.5 h After a total reflux period of 2.5 h (from addition of (E)-ethyl crotonate) heating The cooled reaction mixture was partitioned between aqueous sulfuric acid solution (5% v/v, 500 mL) and dichloromethane (600 mL) The aqueous layer was separated extracted further with two 600-mL portions of dichloromethane The combined organic layers were dried over sodium sulfate were concentrated The solid residue was dissolved to cool slowly to 23° C. whereupon (1R,3R,4S)-p-menth-3-yl(1R,2S)-2-methyl-4,6-dioxocyclo-hexanecarboxylate (2) crystallized as a white powder (mp 180°-181° C., 64.5 g, 36%)

反应条件: temp:23.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of (-)-menthol (23.0 g, 147 mmol, 1 equiv) and 1-butyl acetoacetate (20.0 ml, 121 mmol, 0.80 equiv) in toluene (50 mL) was heated at reflux for 12 h, then was cooled to 23° C. Volatiles were removed in vacuo and toluene (20 mL) and 1-butyl acetoacetate (12.2 mL, 73.5 mmol, 0.50 equiv) were added to the residue. The resulting solution was heated at reflux for 12 h, then was cooled to 23° C. The cooled reaction mixture was concentrated in vacuo and the residue was purified by distillation under reduced pressure (bp 90° C., 30 mmHg) to afford (1R,3R,4S)-p-menth-3-yl acetoacetate (1) as a low-melting solid (33.3 g, 94%). ##STR14## at reflux for 12 h were added to the residue The resulting solution was heated at reflux for 12 h was cooled to 23° C The cooled reaction mixture was concentrated in vacuo the residue was purified by distillation under reduced pressure (bp 90° C., 30 mmHg)