4-溴-2-氟苯乙酮

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Bromine (0.54 mL, 10.6 mmol) was added dropwise to a cold (0° C.) solution of 4-bromo-2-fluoroacetophenone (2.30 g, 10.6 mmol) in dioxane (80 mL) and tetrahydrofuran (80 mL). The mixture was stirred for 1 h at 0° C. and warmed to RT for 15 h. The mixture was diluted with ethyl acetate, washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine prior to drying (Na2SO4). 2-Bromo-1-(4-bromo-2-fluorophenyl)ethanone (D1) was isolated as a colorless film which solidified upon further concentration under high vacuum. This solid was dissolved into anhydrous acetonitrile (50 mL) and treated with N-Boc-L-proline (2.28 g, 10.6 mmol) and diisopropylethylamine (1.85 mL, 10.6 mmol). After being stirred for 3 h at RT, the solvent was removed in vacuo and the residue was partitioned into ethyl acetate and water. The organic phase was washed with 0.1N hydrochloric acid, saturated NaHCO3 solution and brine prior to drying (Na2SO4), filtration, and concentration. This residue was taken up in xylenes (50 mL) and treated to solid NH4OAc (4.1 g, 53.0 mmol). The mixture was heated at 140° C. for 2 hr in a thick-walled, screw-top flask before it was cooled to ambient temperature, diluted with ethyl acetate and washed with saturated NaHCO3 solution and brine prior to drying (Na2SO4) and concentration. Purification of the residue by Biotage™ flash chromatography on silica gel (65M column, preequilibration with 16% B for 1800 mL followed by gradient elution with 16% B to 16% B for 450 mL, 16% B to 50% B for 2199 ml and finally 50% B to 100% B for 2199 mL) afforded title compound (D5) (3.61 g, 83%) as a brownish/caramel-colored oil. A small portion (40 mg) of the title compound was further purified by preparative HPLC (20% B to 100% B over 14 min where B is 10 mM NH4OAc in 10:90 H2O/ACN and A is 10 mM NH4OAc in 95:5 H2O/CAN using a Phenomenex-Gemini 30×100 mm S10 column flowing at 40 mL/min) to afford pure title compound (31.8 mg) as a white solid. warmed to RT for 15 h washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine to drying (Na2SO4)

反应条件: temp:-30.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: An oven dried 500 mL flask, was charged under nitrogen with (S)-2-methyl-CBS-oxazaborolidine 1M in toluene (5.02 mL) and dissolved in CH2Cl2 (250 mL). Me2-BH3 (30 mL, 60.27 mmol) was then added and cooled to −30° C. and reaction stirred for 15 minutes. (1-(4-Bromo-2-fluoro-phenyl)-ethanone (10.9 g, 50.23 mmol) from step 2 below was dissolved in CH2Cl2 (10 mL) and slowly added via addition funnel to the previous solution. The resulting reaction was stirred at 25° C. overnight. The solution was carefully quenched with MeOH, the solvent was removed in vacuo and the residue was purified by flash column chromatography (20% EtOAc in hexanes) to provide the desired product (9 37 g, 90%) as a clear oil. 1H NMR (400 MHz, CDCl3): δ 1.49 (d, J=6.6 Hz, 3H), 5.15 (q, J=12, 6.4 Hz, 1H), 7.15–7.45 (m, 3H). An oven dried 500 mL flask was charged under nitrogen with (S)-2-methyl-CBS-oxazaborolidine 1M in toluene (5.02 mL) dissolved in CH2Cl2 (250 mL) Me2-BH3 (30 mL, 60.27 mmol) was then added reaction slowly added via addition funnel to the previous solution The resulting reaction was stirred at 25° C. overnight The solution was carefully quenched with MeOH the solvent was removed in vacuo the residue was purified by flash column chromatography (20% EtOAc in hexanes)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Bromine (0.54 mL, 10.6 mmol) was added dropwise to a cold (0° C.) solution of 4-bromo-2-fluoroacetophenone (2.30 g, 10.6 mmol) in dioxane (80 mL) and tetrahydrofuran (80 mL). The mixture was stirred for 1 h at 0° C. and warmed to RT for 15 h. The mixture was diluted with ethyl acetate, washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine prior to drying (Na2SO4). 2-Bromo-1-(4-bromo-2-fluorophenyl)ethanone (D1) was isolated as a colorless film which solidified upon further concentration under high vacuum. This solid was dissolved into anhydrous acetonitrile (50 mL) and treated with N-Boc-L-proline (2.28 g, 10.6 mmol) and diisopropylethylamine (1.85 mL, 10.6 mmol). After being stirred for 3 h at RT, the solvent was removed in vacuo and the residue was partitioned into ethyl acetate and water. The organic phase was washed with 0.1N hydrochloric acid, saturated NaHCO3 solution and brine prior to drying (Na2SO4), filtration, and concentration. This residue was taken up in xylenes (50 mL) and treated to solid NH4OAc (4.1 g, 53.0 mmol). The mixture was heated at 140° C. for 2 hr in a thick-walled, screw-top flask before it was cooled to ambient temperature, diluted with ethyl acetate and washed with saturated NaHCO3 solution and brine prior to drying (Na2SO4) and concentration. Purification of the residue by Biotage™ flash chromatography on silica gel (65M column, preequilibration with 16% B for 1800 mL followed by gradient elution with 16% B to 16% B for 450 mL, 16% B to 50% B for 2199 ml and finally 50% B to 100% B for 2199 mL) afforded title compound (D5) (3.61 g, 83%) as a brownish/caramel-colored oil. A small portion (40 mg) of the title compound was further purified by preparative HPLC (20% B to 100% B over 14 min where B is 10 mM NH4OAc in 10:90 H2O/ACN and A is 10 mM NH4OAc in 95:5 H2O/CAN using a Phenomenex-Gemini 30×100 mm S10 column flowing at 40 mL/min) to afford pure title compound (31.8 mg) as a white solid. warmed to RT for 15 h washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine to drying (Na2SO4)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Bromine (0.54 mL, 10.6 mmol) was added dropwise to a cold (0° C.) solution of 4-bromo-2-fluoroacetophenone (2.30 g, 10.6 mmol) in dioxane (80 mL) and tetrahydrofuran (80 mL). The mixture was stirred for 1 h at 0° C. and warmed to RT for 15 h. The mixture was diluted with ethyl acetate, washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine prior to drying (Na2SO4). 2-Bromo-1-(4-bromo-2-fluorophenyl)ethanone (D1) was isolated as a colorless film which solidified upon further concentration under high vacuum. This solid was dissolved into anhydrous acetonitrile (50 mL) and treated with N-Boc-L-proline (2.28 g, 10.6 mmol) and diisopropylethylamine (1.85 mL, 10.6 mmol). After being stirred for 3 h at RT, the solvent was removed in vacuo and the residue was partitioned into ethyl acetate and water. The organic phase was washed with 0.1N hydrochloric acid, saturated NaHCO3 solution and brine prior to drying (Na2SO4), filtration, and concentration. This residue was taken up in xylenes (50 mL) and treated to solid NH4OAc (4.1 g, 53.0 mmol). The mixture was heated at 140° C. for 2 Hr in a thick-walled, screw-top flask before it was cooled to ambient temperature, diluted with ethyl acetate and washed with saturated NaHCO3 solution and brine prior to drying (Na2SO4) and concentration. Purification of the residue by Biotage™ flash chromatography on silica gel (65M column, preequilibration with 16% B for 1800 mL followed by gradient elution with 16% B to 16% B for 450 mL, 16% B to 50% B for 2199 ml and finally 50% B to 100% B for 2199 mL) afforded title compound (D5) (3.61 g, 83%) as a brownish/caramel-colored oil. A small portion (40 mg) of the title compound was further purified by preparative HPLC (20% B to 100% B over 14 min where B is 10 mM NH4OAc in 10:90 H2O/ACN and A is 10 mM NH4OAc in 95:5 H2O/CAN using a Phenomenex-Gemini 30×100 mm S10 column flowing at 40 mL/min) to afford pure title compound (31.8 mg) as a white solid. warmed to RT for 15 h washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine to drying (Na2SO4)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Bromine (0.54 mL, 10.6 mmol) was added dropwise to a cold (0° C.) solution of 4-bromo-2-fluoroacetophenone (2.30 g, 10.6 mmol) in dioxane (80 mL) and tetrahydrofuran (80 mL). The mixture was stirred for 1 h at 0° C. and warmed to RT for 15 h. The mixture was diluted with ethyl acetate, washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine prior to drying (Na2SO4). 2-Bromo-1-(4-bromo-2-fluorophenyl)ethanone (D1) was isolated as a colorless film which solidified upon further concentration under high vacuum. This solid was dissolved into anhydrous acetonitrile (50 mL) and treated with N-Boc-L-proline (2.28 g, 10.6 mmol) and diisopropylethylamine (1.85 mL, 10.6 mmol). After being stirred for 3 h at RT, the solvent was removed in vacuo and the residue was partitioned into ethyl acetate and water. The organic phase was washed with 0.1N hydrochloric acid, saturated NaHCO3 solution and brine prior to drying (Na2SO4), filtration, and concentration. This residue was taken up in xylenes (50 mL) and treated to solid NH4OAc (4.1 g, 53.0 mmol). The mixture was heated at 140° C. for 2 hr in a thick-walled, screw-top flask before it was cooled to ambient temperature, diluted with ethyl acetate and washed with saturated NaHCO3 solution and brine prior to drying (Na2SO4) and concentration. Purification of the residue by Biotage™ flash chromatography on silica gel (65M column, preequilibration with 16% B for 1800 mL followed by gradient elution with 16% B to 16% B for 450 mL, 16% B to 50% B for 2199 ml and finally 50% B to 100% B for 2199 mL) afforded title compound (D5) (3.61 g, 83%) as a brownish/caramel-colored oil. A small portion (40 mg) of the title compound was further purified by preparative HPLC (20% B to 100% B over 14 min where B is 10 mM NH4OAc in 10:90 H2O/ACN and A is 10 mM NH4OAc in 95:5 H2O/CAN using a Phenomenex-Gemini 30×100 mm S10 column flowing at 40 mL/min) to afford pure title compound (31.8 mg) as a white solid. warmed to RT for 15 h washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine to drying (Na2SO4)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Bromine (0.54 mL, 10.6 mmol) was added dropwise to a cold (0° C.) solution of 4-bromo-2-fluoroacetophenone (2.30 g, 10.6 mmol) in dioxane (80 mL) and tetrahydrofuran (80 mL). The mixture was stirred for 1 h at 0° C. and warmed to RT for 15 h. The mixture was diluted with ethyl acetate, washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine prior to drying (Na2SO4). 2-Bromo-1-(4-bromo-2-fluorophenyl)ethanone (D1) was isolated as a colorless film which solidified upon further concentration under high vacuum. This solid was dissolved into anhydrous acetonitrile (50 mL) and treated with N-Boc-L-proline (2.28 g, 10.6 mmol) and diisopropylethylamine (1.85 mL, 10.6 mmol). After being stirred for 3 h at RT, the solvent was removed in vacuo and the residue was partitioned into ethyl acetate and water. The organic phase was washed with 0.1N hydrochloric acid, saturated NaHCO3 solution and brine prior to drying (Na2SO4), filtration, and concentration. This residue was taken up in xylenes (50 mL) and treated to solid NH4OAc (4.1 g, 53.0 mmol). The mixture was heated at 140° C. for 2 hr in a thick-walled, screw-top flask before it was cooled to ambient temperature, diluted with ethyl acetate and washed with saturated NaHCO3 solution and brine prior to drying (Na2SO4) and concentration. Purification of the residue by Biotage™ flash chromatography on silica gel (65M column, preequilibration with 16% B for 1800 mL followed by gradient elution with 16% B to 16% B for 450 mL, 16% B to 50% B for 2199 ml and finally 50% B to 100% B for 2199 mL) afforded title compound (D5) (3.61 g, 83%) as a brownish/caramel-colored oil. A small portion (40 mg) of the title compound was further purified by preparative HPLC (20% B to 100% B over 14 min where B is 10 mM NH4OAc in 10:90 H2O/ACN and A is 10 mM NH4OAc in 95:5 H2O/CAN using a Phenomenex-Gemini 30×100 mm S10 column flowing at 40 mL/min) to afford pure title compound (31.8 mg) as a white solid. warmed to RT for 15 h washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine to drying (Na2SO4)

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Bromine (0.54 mL, 10.6 mmol) was added dropwise to a cold (0° C.) solution of 4-bromo-2-fluoroacetophenone (2.30 g, 10.6 mmol) in dioxane (80 mL) and tetrahydrofuran (80 mL). The mixture was stirred for 1 h at 0° C. and warmed to RT for 15 h. The mixture was diluted with ethyl acetate, washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine prior to drying (Na2SO4). 2-Bromo-1-(4-bromo-2-fluorophenyl)ethanone (D1) was isolated as a colorless film which solidified upon further concentration under high vacuum. This solid was dissolved into anhydrous acetonitrile (50 mL) and treated with N-Boc-L-proline (2.28 g, 10.6 mmol) and diisopropylethylamine (1.85 mL, 10.6 mmol). After being stirred for 3 h at RT, the solvent was removed in vacuo and the residue was partitioned into ethyl acetate and water. The organic phase was washed with 0.1N hydrochloric acid, saturated NaHCO3 solution and brine prior to drying (Na2SO4), filtration, and concentration. This residue was taken up in xylenes (50 mL) and treated to solid NH4OAc (4.1 g, 53.0 mmol). The mixture was heated at 140° C. for 2 hr in a thick-walled, screw-top flask before it was cooled to ambient temperature, diluted with ethyl acetate and washed with saturated NaHCO3 solution and brine prior to drying (Na2SO4) and concentration. Purification of the residue by Biotage™ flash chromatography on silica gel (65M column, preequilibration with 16% B for 1800 mL followed by gradient elution with 16% B to 16% B for 450 mL, 16% B to 50% B for 2199 ml and finally 50% B to 100% B for 2199 mL) afforded title compound (D5) (3.61 g, 83%) as a brownish/caramel-colored oil. A small portion (40 mg) of the title compound was further purified by preparative HPLC (20% B to 100% B over 14 min where B is 10 mM NH4OAc in 10:90 H2O/ACN and A is 10 mM NH4OAc in 95:5 H2O/CAN using a Phenomenex-Gemini 30×100 mm S10 column flowing at 40 mL/min) to afford pure title compound (31.8 mg) as a white solid. warmed to RT for 15 h washed with saturated NaHCO3 solution, 5% sodium thiosulfate solution and brine to drying (Na2SO4)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1-(3,5′-Difluoro-2′-methoxy-biphenyl-4-yl)-ethylamine was prepared in a similar manner to 1-(2-allyl-5′-fluoro-2′-methoxy-biphenyl-4-yl)-ethylamine (Example 34) using 4′-bromo-2′-fluoroacetophenone to give 1-(4-bromo-2-fluoro-phenyl)-ethylamine. To a solution of 1-(3,5′-difluoro-2′-methoxy-biphenyl-4-yl)-ethylamine (20.0 mg, 0.08 mmol) in dichloromethane (1 ml) was added triethylamine (8.1 mg, 0.08 mmol) and 1-methyl-3-trifluoromethyl-1H-pyrazole-4-sulfonyl chloride (14.2 mg, 0.06 mmol). The solution was stirred overnight then the solvent evaporated and the residue purified by flash chromatography over silica gel eluting with dichloromethane. Evaporation of solvent under reduced pressure gave the title compound (20 mg). 1H NMR (400 MHz, CDCl3): δ 7.51 (s, 1H), 7.21-7.16 (m, 2H), 7.14-7.09 (m, 1H), 7.05-6.95 (m, 2H), 6.93-6.88 (m, 1H), 5.11 (d, 1H), 4.76 (dq, 1H), 3.81 (s, 3H), 3.73 (s, 3H), 1.55 (d, 3H) ppm; MS (ESI) m/z: 498.3 [M+Na]+.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 1-(3,5′-Difluoro-2′-methoxy-biphenyl-4-yl)-ethylamine was prepared in a similar manner to 1-(2-allyl-5′-fluoro-2′-methoxy-biphenyl-4-yl)-ethylamine (Example 34) using 4′-bromo-2′-fluoroacetophenone to give 1-(4-bromo-2-fluoro-phenyl)-ethylamine. To a solution of 1-(3,5′-difluoro-2′-methoxy-biphenyl-4-yl)-ethylamine (20.0 mg, 0.08 mmol) in dichloromethane (1 ml) was added triethylamine (8.1 mg, 0.08 mmol) and 1-methyl-3-trifluoromethyl-1H-pyrazole-4-sulfonyl chloride (14.2 mg, 0.06 mmol). The solution was stirred overnight then the solvent evaporated and the residue purified by flash chromatography over silica gel eluting with dichloromethane. Evaporation of solvent under reduced pressure gave the title compound (20 mg). 1H NMR (400 MHz, CDCl3): δ 7.51 (s, 1H), 7.21-7.16 (m, 2H), 7.14-7.09 (m, 1H), 7.05-6.95 (m, 2H), 6.93-6.88 (m, 1H), 5.11 (d, 1H), 4.76 (dq, 1H), 3.81 (s, 3H), 3.73 (s, 3H), 1.55 (d, 3H) ppm; MS (ESI) m/z: 498.3 [M+Na]+.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Using the same reaction conditions as in Example 14, 1-(4-methyl-pyridin-3-yl)-imidazolidin-2-one (I-14b: 500 mg, 2.8216 mmol) was reacted with 1-(4-bromo-2-fluoro-phenyl)-ethanone (679.9 mg, 3.1038 mmol), 1,4-dioxane (50 mL), copper iodide (53.6 mg, 0.28216 mmol), trans-1,2-diamino cyclohexane (97.09 mg, 0.84650 mmol) and potassium phosphate (1.49 g, 7.0541 mmol) to afford the crude product. Purification by column chromatography on silica gel (2% MeOH in CHCl3) afforded 780 mg of 1-(4-acetyl-3-fluoro-phenyl)-3-(4-methyl-pyridin-3-yl)-imidazolidin-2-one (111a: 88.2% yield). to afford the crude product Purification by column chromatography on silica gel (2% MeOH in CHCl3)