已二酰二胺

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A series of films were prepared using these above four bisamides at an equivalent molar replacement, that is, normalizing to the molecular weights of 396.5, 432.6 and 376.5 for the phthalamide, sebacamide and adipamide replacements of 390.5 m.w. hexamethoxymethyl-melamine. Removal of 1.5 g melamine from a nominal ten g solids formulation therefore resulted in replacement by 1.52 g iso- or terephthalamide, 1.66 g sebacamide and 1.43 g adipamide. Removal of drawn films after curing for 20 minutes at 300° F. as described above allowed the following dynamic mechanical analysis of crosslinking as described in Journal of Coatings Technology, 46, no. 808, 29-42 (1992) by L.W. Hill in the article 'Structure/Property Relationships of Thermoset Coatings. A series of films were prepared Removal of 1.5 g melamine from a nominal ten g solids formulation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A series of films were prepared using these above four bisamides at an equivalent molar replacement, that is, normalizing to the molecular weights of 396.5, 432.6 and 376.5 for the phthalamide, sebacamide and adipamide replacements of 390.5 m.w. hexamethoxymethyl-melamine. Removal of 1.5 g melamine from a nominal ten g solids formulation therefore resulted in replacement by 1.52 g iso- or terephthalamide, 1.66 g sebacamide and 1.43 g adipamide. Removal of drawn films after curing for 20 minutes at 300° F. as described above allowed the following dynamic mechanical analysis of crosslinking as described in Journal of Coatings Technology, 46, no. 808, 29-42 (1992) by L.W. Hill in the article 'Structure/Property Relationships of Thermoset Coatings. A series of films were prepared Removal of 1.5 g melamine from a nominal ten g solids formulation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A cellular residue containing 13.1 mg of dry weight of cells was suspended in 2 ml of a 52.3 mM solution of adiponitrile in 50 mM potassium phosphate buffer, pH 7. The reaction was carried out at 25° C., with shaking, and the kinetics were followed by sampling. 5-Cyanovaleramide, adipamide, 5-cyanovalerate, adipamate and adipate were determined on each sample by high performance liquid chromatography (HPLC). The results are collated in FIG. 1, which shows the curves of the yield (on the ordinate) of cyanovalerate (curve a) and ammonium adipate (curve b). The respective rates of formation of cyanovalerate and adipate were greater than 0.45 and equal to 0.15 U/mg of dry weight of cells (1 U is equal to 1 μmol of product formed per minute). A cellular residue containing 13.1 mg of dry weight of cells was carried out at 25° C. by sampling

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A series of films were prepared using these above four bisamides at an equivalent molar replacement, that is, normalizing to the molecular weights of 396.5, 432.6 and 376.5 for the phthalamide, sebacamide and adipamide replacements of 390.5 m.w. hexamethoxymethyl-melamine. Removal of 1.5 g melamine from a nominal ten g solids formulation therefore resulted in replacement by 1.52 g iso- or terephthalamide, 1.66 g sebacamide and 1.43 g adipamide. Removal of drawn films after curing for 20 minutes at 300° F. as described above allowed the following dynamic mechanical analysis of crosslinking as described in Journal of Coatings Technology, 46, no. 808, 29-42 (1992) by L. W. Hill in the article `Structure/Property Relationships of Thermoset Coatings. A series of films were prepared Removal of 1.5 g melamine from a nominal ten g solids formulation

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A cellular residue containing 13.1 mg of dry weight of cells was suspended in 2 ml of a 52.3 mM solution of adiponitrile in 50 mM potassium phosphate buffer, pH 7. The reaction was carried out at 25° C., with shaking, and the kinetics were followed by sampling. 5-Cyanovaleramide, adipamide, 5-cyanovalerate, adipamate and adipate were determined on each sample by high performance liquid chromatography (HPLC). The results are collated in FIG. 1, which shows the curves of the yield (on the ordinate) of cyanovalerate (curve a) and ammonium adipate (curve b). The respective rates of formation of cyanovalerate and adipate were greater than 0.45 and equal to 0.15 U/mg of dry weight of cells (1 U is equal to 1 μmol of product formed per minute). A cellular residue containing 13.1 mg of dry weight of cells was carried out at 25° C. by sampling