醋酸铜 (II) 水合物

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A Cu containing catalyst was prepared by ion-exchange with copper acetate. A copper (II) acetate monohydrate solution was prepared by dissolving 47.9 g of the copper salt in 800 L of deionized water at 60° C. 200 g of the NH4-form described in comparative example 2.1 was then added to this solution. An ion-exchange reaction between the NH4-form of the zeolite described in comparative example 2.1 and the copper ions was carried out by agitating the slurry at 60° C. for 1 hour. The pH was between 5 and 5.3 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μScm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu catalyst comprised CuO at 3.4% by weight and Na2O at less than 100 ppm. The SiO2:Al2O3 was 29. was then added to this solution The pH was between 5 and 5.3 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A Cu containing catalyst was prepared by ion-exchange with copper acetate. A 0.3 M copper (II) acetate monohydrate solution was prepared by dissolving 96 g of the copper salt in 1.6 L of deionized water at 60° C. 300 g of the calcined zeolite of example 1 was then added to this solution. An ion-exchange reaction between the H-form of the calcined zeolite described in example 1 and the copper ions was carried out by agitating the slurry at 60° C. for 1 hour. The pH was between 4.5 and 4.8 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μScm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu catalyst comprised CuO at 3.29% by weight and Na at 300 ppm, both reported on a volatile free basis. The BET surface of the calcined material was 468 m2/g, determined according to DIN 66131, and the Langmuir surface area was 636 m2/g, determined according to DIN 66135. The pH was between 4.5 and 4.8 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A CuCHA powder catalyst was prepared by ion-exchange with copper acetate. A 0.40 M of copper (II) acetate monohydrate solution was prepared by dissolving 89.8 g of the copper salt in 1.125 L of deionized water at 70° C. 300 g of NH4+-form CHA was then added to this solution. An ion-exchange reaction between the NH4+-form CHA and the copper ions was carried out by agitating the slurry at 70° C. for 1 hour. The pH was between 4.8 and 4.5 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μcm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained CuCHA catalyst comprised CuO at 3.06% by weight and Na2O at 140 ppm. The pH was between 4.8 and 4.5 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A CuCHA powder catalyst was prepared by ion-exchange with copper acetate. A 0.40 M of copper (II) acetate monohydrate solution was prepared by dissolving 89.8 g of the copper salt in 1.125 L of deionized water at 70° C. 300 g of NH4+-form CHA was then added to this solution. An ion-exchange reaction between the NH4+-form CHA and the copper ions was carried out by agitating the slurry at 70° C. for 1 hour. The pH was between 4.8 and 4.5 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μcm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained CuCHA catalyst comprised CuO at 3.06% by weight and Na2O at 140 ppm. The pH was between 4.8 and 4.5 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A copper (II) acetate monohydrate solution was prepared by dissolving 89.8 g of copper acetate salt in 1.125 l of deionized water at 70° C. 300 g of the zeolitic material of CE 1.4 was then added to this solution. An ion-exchange reaction between the NH4+-form of the zeolitic material and the copper ions was carried out by agitating the slurry at 70° C. for 1.5 hours. The pH was between 4.8 and 4.5 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 microSiemens/cm, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu containing material comprised Cu at 2.4% by weight and Na at 104 ppm. The SiO2:Al2O3 was 30:1. The pH was between 4.8 and 4.5 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A copper (II) acetate monohydrate solution was prepared by dissolving 89.8 g of copper acetate salt in 1.125 l of deionized water at 70° C. 300 g of the zeolitic material of CE 1.4 was then added to this solution. An ion-exchange reaction between the NH4+-form of the zeolitic material and the copper ions was carried out by agitating the slurry at 70° C. for 1.5 hours. The pH was between 4.8 and 4.5 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 microSiemens/cm, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu containing material comprised Cu at 2.4% by weight and Na at 104 ppm. The SiO2:Al2O3 was 30:1. The pH was between 4.8 and 4.5 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A copper (II) acetate monohydrate solution was prepared by dissolving 89.8 g of copper acetate salt in 1.125 l of deionized water at 70° C. 300 g of the zeolitic material of CE 1.4 was then added to this solution. An ion-exchange reaction between the NH4+-form of the zeolitic material and the copper ions was carried out by agitating the slurry at 70° C. for 1.5 hours. The pH was between 4.8 and 4.5 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 microSiemens/cm, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu containing material comprised Cu at 2.4% by weight and Na at 104 ppm. The SiO2:Al2O3 was 30:1. The pH was between 4.8 and 4.5 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 1:1.1 molar solution of porphyrin compound (VIII) (50 milligrams, 36.5 millimoles) to Cu(OAc)2.H2O (8 milligrams, 40 millimoles) to Cu(OAc)2H2O was prepared by dissolving the two compounds in methanol. The resulting purple solution was stirred for 20 minutes during which time the color turned to red. The solvent was then removed by rotary evaporation. The resulting residue was dissolved in dichloromethane to make an organic phase, which was washed with water and then dried over anhydrous sodium sulfate. The solvent of the organic phase was removed by rotary evaporation, leaving a red copper porphyrin compound. The compound was re-dissolved in dichloromethane and purified on a silica pad eluting with a 3:1:1 solvent mixture of hexane to dichloromethane to acetone. The solvent of the organic phase was removed by rotary evaporation, leaving 36 milligrams of the copper porphyrin compound (IX) (70% yield). The solvent was then removed by rotary evaporation The resulting residue was dissolved in dichloromethane was washed with water dried over anhydrous sodium sulfate The solvent of the organic phase was removed by rotary evaporation

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A Cu containing catalyst was prepared by ion-exchange with copper acetate. A copper (II) acetate monohydrate solution was prepared by dissolving 47.9 g of the copper salt in 800 L of deionized water at 60° C. 200 g of the NH4-form described in comparative example 2.1 was then added to this solution. An ion-exchange reaction between the NH4-form of the zeolite described in comparative example 2.1 and the copper ions was carried out by agitating the slurry at 60° C. for 1 hour. The pH was between 5 and 5.3 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μScm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu catalyst comprised CuO at 3.4% by weight and Na2O at less than 100 ppm. The SiO2:Al2O3 was 29. was then added to this solution The pH was between 5 and 5.3 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A Cu containing catalyst was prepared by ion-exchange with copper acetate. A copper (II) acetate monohydrate solution was prepared by dissolving 47.9 g of the copper salt in 800 L of deionized water at 60° C. 200 g of the NH4-form described in comparative example 2.1 was then added to this solution. An ion-exchange reaction between the NH4-form of the zeolite described in comparative example 2.1 and the copper ions was carried out by agitating the slurry at 60° C. for 1 hour. The pH was between 5 and 5.3 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μScm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu catalyst comprised CuO at 3.4% by weight and Na2O at less than 100 ppm. The SiO2:Al2O3 was 29. was then added to this solution The pH was between 5 and 5.3 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A Cu containing catalyst was prepared by ion-exchange with copper acetate. A 0.3 M copper (II) acetate monohydrate solution was prepared by dissolving 96 g of the copper salt in 1.6 L of deionized water at 60° C. 300 g of the calcined zeolite of example 1 was then added to this solution. An ion-exchange reaction between the H-form of the calcined zeolite described in example 1 and the copper ions was carried out by agitating the slurry at 60° C. for 1 hour. The pH was between 4.5 and 4.8 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μScm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu catalyst comprised CuO at 3.29% by weight and Na at 300 ppm, both reported on a volatile free basis. The BET surface of the calcined material was 468 m2/g, determined according to DIN 66131, and the Langmuir surface area was 636 m2/g, determined according to DIN 66135. The pH was between 4.5 and 4.8 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A Cu containing catalyst was prepared by ion-exchange with copper acetate. A 0.3 M copper (II) acetate monohydrate solution was prepared by dissolving 96 g of the copper salt in 1.6 L of deionized water at 60° C. 300 g of the calcined zeolite of example 1 was then added to this solution. An ion-exchange reaction between the H-form of the calcined zeolite described in example 1 and the copper ions was carried out by agitating the slurry at 60° C. for 1 hour. The pH was between 4.5 and 4.8 during the reaction. The resulting mixture was then filtered, washed until the filtrate had a conductivity of <200 μScm−1, which indicated that substantially no soluble or free copper remained in the sample, and the washed sample was dried at 90° C. The obtained Cu catalyst comprised CuO at 3.29% by weight and Na at 300 ppm, both reported on a volatile free basis. The BET surface of the calcined material was 468 m2/g, determined according to DIN 66131, and the Langmuir surface area was 636 m2/g, determined according to DIN 66135. The pH was between 4.5 and 4.8 during the reaction The resulting mixture was then filtered washed until the filtrate the washed sample was dried at 90° C