甲基 3-羟基-3-苯基丙酸乙酯

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:65.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: At room temperature, a three-necked flask fitted with reflux condenser, internal thermometer, dropping funnel and stirrer was charged, under nitrogen protective gas, with 5.7 g of zinc powder (87 mmol) in 35 ml of isopropyl acetate. After 1.65 ml of trimethylchlorosilane (13 mmol) had been added, the mixture was heated at 65° C. for 30 min. Following cooling to 60° C., 6.2 g of benzaldehyde (58 mmol) were added and, over the course of 4 min, 10.6 g of methyl bromoacetate (70 mmol) were added dropwise at 55° C., the temperature being maintained at 55° C. by external cooling. The mixture was then stirred at 55° C. for 5 min and, after cooling to 0° C., acidified with 40 ml of 2 N hydrochloric acid to a pH of 1 and stirred for 30 min. Excess zinc was removed by filtration and the organic phase separated. The organic phase was then stirred at 0° C. with 40 ml of 0.5 N hydrochloric acid and finally washed with 20 ml of saturated sodium hydrogen carbonate solution. Following phase separation and drying over sodium sulfate, the solvent was distilled off under reduced pressure. Methyl 3-hydroxy-3-phenylpropionate was obtained in a yield of 8.9 g (85% of theory) with a boiling point of 76° C. (0.07 mbar). At room temperature, a three-necked flask fitted with reflux condenser Following cooling to 60° C. were added dropwise at 55° C. the temperature being maintained at 55° C. by external cooling after cooling to 0° C. stirred for 30 min Excess zinc was removed by filtration the organic phase separated The organic phase was then stirred at 0° C. with 40 ml of 0.5 N hydrochloric acid finally washed with 20 ml of saturated sodium hydrogen carbonate solution Following phase separation drying over sodium sulfate the solvent was distilled off under reduced pressure

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: At room temperature, a three-neck flask equipped with a reflux condenser, internal thermometer, dropping funnel and stirrer under nitrogen protective gas was initially charged with 7.6 g of zinc powder (115 mmol) in 45 ml of isopropyl acetate. After 1.83 ml of trimethylchlorosilane (14 mmol) had been added, the mixture was heated to 60° C. for 15 min, then allowed to cool to 55° C. and 16.3 g of undiluted methyl bromoacetate (107 mmol) were subsequently added dropwise within 5 min, and the temperature was maintained at 60° C. by external cooling. The mixture was then stirred at 50° C. for 15 min. After cooling to 30° C., 9.4 g of undiluted benzaldehyde (89 mmol) were added, and the temperature was maintained at 40° C. by external cooling. After stirring had been continued at 40° C. for 30 min, the mixture was cooled to 0° C., acidified with 20 ml of 20% hydrochloric acid to a pH of 1 and the mixture was stirred for 30 min, during which excess zinc dissolved. The organic phase was then removed. The organic phase was then stirred with 30 ml of concentrated ammonia solution at 0° C. for 10 min. After the phase separation, drying was effected over sodium sulfate and the solvent was distilled off under reduced pressure. Methyl 3-hydroxy-3-phenylpropionate was obtained in a yield of 14.3 g (89% of theory) and had a boiling point of 78° C. (0.08 mbar). At room temperature, a three-neck flask equipped with a reflux condenser to cool to 55° C. the temperature was maintained at 60° C. by external cooling After cooling to 30° C. the temperature was maintained at 40° C. by external cooling After stirring had been continued at 40° C. for 30 min the mixture was cooled to 0° C. dissolved The organic phase was then removed The organic phase was then stirred with 30 ml of concentrated ammonia solution at 0° C. for 10 min After the phase separation drying the solvent was distilled off under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:65.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: At room temperature, a three-necked flask fitted with reflux condenser, internal thermometer, dropping funnel and stirrer was charged, under nitrogen protective gas, with 5.7 g of zinc powder (87 mmol) in 35 ml of isopropyl acetate. After 1.65 ml of trimethylchlorosilane (13 mmol) had been added, the mixture was heated at 65° C. for 30 min. Following cooling to 60° C., 6.2 g of benzaldehyde (58 mmol) were added and, over the course of 4 min, 10.6 g of methyl bromoacetate (70 mmol) were added dropwise at 55° C., the temperature being maintained at 55° C. by external cooling. The mixture was then stirred at 55° C. for 5 min and, after cooling to 0° C., acidified with 40 ml of 2 N hydrochloric acid to a pH of 1 and stirred for 30 min. Excess zinc was removed by filtration and the organic phase separated. The organic phase was then stirred at 0° C. with 40 ml of 0.5 N hydrochloric acid and finally washed with 20 ml of saturated sodium hydrogen carbonate solution. Following phase separation and drying over sodium sulfate, the solvent was distilled off under reduced pressure. Methyl 3-hydroxy-3-phenylpropionate was obtained in a yield of 8.9 g (85% of theory) with a boiling point of 76° C. (0.07 mbar). At room temperature, a three-necked flask fitted with reflux condenser Following cooling to 60° C. were added dropwise at 55° C. the temperature being maintained at 55° C. by external cooling after cooling to 0° C. stirred for 30 min Excess zinc was removed by filtration the organic phase separated The organic phase was then stirred at 0° C. with 40 ml of 0.5 N hydrochloric acid finally washed with 20 ml of saturated sodium hydrogen carbonate solution Following phase separation drying over sodium sulfate the solvent was distilled off under reduced pressure

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: At room temperature, a three-neck flask equipped with a reflux condenser, internal thermometer, dropping funnel and stirrer under nitrogen protective gas was initially charged with 7.6 g of zinc powder (115 mmol) in 45 ml of isopropyl acetate. After 1.83 ml of trimethylchlorosilane (14 mmol) had been added, the mixture was heated to 60° C. for 15 min, then allowed to cool to 55° C. and 16.3 g of undiluted methyl bromoacetate (107 mmol) were subsequently added dropwise within 5 min, and the temperature was maintained at 60° C. by external cooling. The mixture was then stirred at 50° C. for 15 min. After cooling to 30° C., 9.4 g of undiluted benzaldehyde (89 mmol) were added, and the temperature was maintained at 40° C. by external cooling. After stirring had been continued at 40° C. for 30 min, the mixture was cooled to 0° C., acidified with 20 ml of 20% hydrochloric acid to a pH of 1 and the mixture was stirred for 30 min, during which excess zinc dissolved. The organic phase was then removed. The organic phase was then stirred with 30 ml of concentrated ammonia solution at 0° C. for 10 min. After the phase separation, drying was effected over sodium sulfate and the solvent was distilled off under reduced pressure. Methyl 3-hydroxy-3-phenylpropionate was obtained in a yield of 14.3 g (89% of theory) and had a boiling point of 78° C. (0.08 mbar). At room temperature, a three-neck flask equipped with a reflux condenser to cool to 55° C. the temperature was maintained at 60° C. by external cooling After cooling to 30° C. the temperature was maintained at 40° C. by external cooling After stirring had been continued at 40° C. for 30 min the mixture was cooled to 0° C. dissolved The organic phase was then removed The organic phase was then stirred with 30 ml of concentrated ammonia solution at 0° C. for 10 min After the phase separation drying the solvent was distilled off under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir: