2′-溴-2,6-二甲氧基联苯

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 250-mL round-bottom flask equipped with a magnetic stir bar was added 2′-bromo-2,6-dimethoxybiphenyl (see Buchwald S L, Journal of the American Chemical Society 2005; 127:4685-4696) (7.02 g, 24.0 mmol, 1 equiv). Degassed, anhydrous tetrahydrofuran was added (80 mL) followed by N,N,N′,N′-tetramethylethylene-1,2-diamine (4.31 mL, 28.7 mmol, 1.2 equiv). The resulting solution was cooled to −78° C., and then n-butyllithium (11.5 mL, 28.7 mmol, 1.2 equiv, 2.5 M in hexanes) was added in a dropwise fashion. After the addition of 5 mL of n-butyllithium the reaction slurry could no longer be stirred. The reaction flask was warmed to 0° C. at which point the slurry became free-flowing. The remainder of the n-butyllithium (˜6.5 mL) was added over the course of 10 minutes. The reaction was stirred for 90 minutes at 0° C., and then the aryllithium intermediate was quenched with diethyl chlorophosphate (4.15 mL, 28.7 mmol, 1.2 equiv). The reaction was re-cooled to −78° C. and stirred for 1 hour, then the cooling bath was removed and the flask was warmed to room temperature. At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL). The reaction mixture was worked up by separating the phases and washing the aqueous layer with ethyl acetate (4×60 mL). The combined organic fractions were then washed once with brine (150 mL), dried over sodium sulfate, filtered, and concentrated on a rotary evaporator. The crude product was purified by column chromatography (120-g column; gradient: 1.5 column volumes dichloromethane, ramp up to 88:12 dichloromethane:acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield). 1H NMR (400 MHz, CDCl3) δ ppm 8.07 (dd, J=14.1, 7.7 Hz, 1H), 7.57 (t, J=7.5 Hz, 1H), 7.46-7.37 (m, 1H), 7.30 (t, J=8.3 Hz, 1H), 7.24-7.18 (m, 1H), 6.60 (d, J=8.4 Hz, 2H), 3.98-3.77 (m, 4H), 3.70 (s, 6H), 1.17 (t, J=7.1 Hz, 6H). 31P NMR (CDCl3, 202 MHz) δ ppm 15.2 (s). To a 250-mL round-bottom flask equipped with a magnetic stir bar Degassed anhydrous tetrahydrofuran was added (80 mL) The reaction flask was warmed to 0° C. at which point the slurry The reaction was stirred for 90 minutes at 0° C. The reaction was re-cooled to −78° C. stirred for 1 hour the cooling bath was removed the flask was warmed to room temperature At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL) by separating the phases washing the aqueous layer with ethyl acetate (4×60 mL) The combined organic fractions were then washed once with brine (150 mL) dried over sodium sulfate filtered concentrated on a rotary evaporator The crude product was purified by column chromatography (120-g column acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield)

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 250-mL round-bottom flask equipped with a magnetic stir bar was added 2′-bromo-2,6-dimethoxybiphenyl (see Buchwald S L, Journal of the American Chemical Society 2005; 127:4685-4696) (7.02 g, 24.0 mmol, 1 equiv). Degassed, anhydrous tetrahydrofuran was added (80 mL) followed by N,N,N′,N′-tetramethylethylene-1,2-diamine (4.31 mL, 28.7 mmol, 1.2 equiv). The resulting solution was cooled to −78° C., and then n-butyllithium (11.5 mL, 28.7 mmol, 1.2 equiv, 2.5 M in hexanes) was added in a dropwise fashion. After the addition of 5 mL of n-butyllithium the reaction slurry could no longer be stirred. The reaction flask was warmed to 0° C. at which point the slurry became free-flowing. The remainder of the n-butyllithium (˜6.5 mL) was added over the course of 10 minutes. The reaction was stirred for 90 minutes at 0° C., and then the aryllithium intermediate was quenched with diethyl chlorophosphate (4.15 mL, 28.7 mmol, 1.2 equiv). The reaction was re-cooled to −78° C. and stirred for 1 hour, then the cooling bath was removed and the flask was warmed to room temperature. At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL). The reaction mixture was worked up by separating the phases and washing the aqueous layer with ethyl acetate (4×60 mL). The combined organic fractions were then washed once with brine (150 mL), dried over sodium sulfate, filtered, and concentrated on a rotary evaporator. The crude product was purified by column chromatography (120-g column; gradient: 1.5 column volumes dichloromethane, ramp up to 88:12 dichloromethane:acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield). 1H NMR (400 MHz, CDCl3) δ ppm 8.07 (dd, J=14.1, 7.7 Hz, 1H), 7.57 (t, J=7.5 Hz, 1H), 7.46-7.37 (m, 1H), 7.30 (t, J=8.3 Hz, 1H), 7.24-7.18 (m, 1H), 6.60 (d, J=8.4 Hz, 2H), 3.98-3.77 (m, 4H), 3.70 (s, 6H), 1.17 (t, J=7.1 Hz, 6H). 31P NMR (CDCl3, 202 MHz) δ ppm 15.2 (s). To a 250-mL round-bottom flask equipped with a magnetic stir bar Degassed anhydrous tetrahydrofuran was added (80 mL) The reaction flask was warmed to 0° C. at which point the slurry The reaction was stirred for 90 minutes at 0° C. The reaction was re-cooled to −78° C. stirred for 1 hour the cooling bath was removed the flask was warmed to room temperature At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL) by separating the phases washing the aqueous layer with ethyl acetate (4×60 mL) The combined organic fractions were then washed once with brine (150 mL) dried over sodium sulfate filtered concentrated on a rotary evaporator The crude product was purified by column chromatography (120-g column acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield)

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 250-mL round-bottom flask equipped with a magnetic stir bar was added 2′-bromo-2,6-dimethoxybiphenyl (see Buchwald S L, Journal of the American Chemical Society 2005; 127:4685-4696) (7.02 g, 24.0 mmol, 1 equiv). Degassed, anhydrous tetrahydrofuran was added (80 mL) followed by N,N,N′,N′-tetramethylethylene-1,2-diamine (4.31 mL, 28.7 mmol, 1.2 equiv). The resulting solution was cooled to −78° C., and then n-butyllithium (11.5 mL, 28.7 mmol, 1.2 equiv, 2.5 Min hexanes) was added in a dropwise fashion. After the addition of 5 mL of n-butyllithium the reaction slurry could no longer be stirred. The reaction flask was warmed to 0° C. at which point the slurry became free-flowing. The remainder of the n-butyllithium (−6.5 mL) was added over the course of 10 minutes. The reaction was stirred for 90 minutes at 0° C., and then the aryllithium intermediate was quenched with diethyl chlorophosphate (4.15 mL, 28.7 mmol, 1.2 equiv). The reaction was re-cooled to −78° C. and stirred for 1 hour, then the cooling bath was removed and the flask was warmed to room temperature. At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL). The reaction mixture was worked up by separating the phases and washing the aqueous layer with ethyl acetate (4×60 mL). The combined organic fractions were then washed once with brine (150 mL), dried over sodium sulfate, filtered, and concentrated on a rotary evaporator. The crude product was purified by column chromatography (120-g column; gradient: 1.5 column volumes dichloromethane, ramp up to 88:12 dichloromethane:acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield). 1H NMR (400 MHz, CDCl3) δ ppm 8.07 (dd, J=14.1, 7.7 Hz, 1H), 7.57 (t, J=7.5 Hz, 1H), 7.46-7.37 (m, 1H), 7.30 (t, J=8.3 Hz, 1H), 7.24-7.18 (m, 1H), 6.60 (d, J=8.4 Hz, 2H), 3.98-3.77 (m, 4H), 3.70 (s, 6H), 1.17 (t, J=7.1 Hz, 6H). 31P NMR (CDCl3, 202 MHz) δ ppm 15.2 (s). To a 250-mL round-bottom flask equipped with a magnetic stir bar Degassed anhydrous tetrahydrofuran was added (80 mL) The reaction flask was warmed to 0° C. at which point the slurry The reaction was stirred for 90 minutes at 0° C. The reaction was re-cooled to −78° C. stirred for 1 hour the cooling bath was removed the flask was warmed to room temperature At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL) by separating the phases washing the aqueous layer with ethyl acetate (4×60 mL) The combined organic fractions were then washed once with brine (150 mL) dried over sodium sulfate filtered concentrated on a rotary evaporator The crude product was purified by column chromatography (120-g column acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield)

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 250-mL round-bottom flask equipped with a magnetic stir bar was added 2′-bromo-2,6-dimethoxybiphenyl (see Buchwald S L, Journal of the American Chemical Society 2005; 127:4685-4696) (7.02 g, 24.0 mmol, 1 equiv). Degassed, anhydrous tetrahydrofuran was added (80 mL) followed by N,N,N′,N′-tetramethylethylene-1,2-diamine (4.31 mL, 28.7 mmol, 1.2 equiv). The resulting solution was cooled to −78° C., and then n-butyllithium (11.5 mL, 28.7 mmol, 1.2 equiv, 2.5 M in hexanes) was added in a dropwise fashion. After the addition of 5 mL of n-butyllithium the reaction slurry could no longer be stirred. The reaction flask was warmed to 0° C. at which point the slurry became free-flowing. The remainder of the n-butyllithium (˜6.5 mL) was added over the course of 10 minutes. The reaction was stirred for 90 minutes at 0° C., and then the aryllithium intermediate was quenched with diethyl chlorophosphate (4.15 mL, 28.7 mmol, 1.2 equiv). The reaction was re-cooled to −78° C. and stirred for 1 hour, then the cooling bath was removed and the flask was warmed to room temperature. At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL). The reaction mixture was worked up by separating the phases and washing the aqueous layer with ethyl acetate (4×60 mL). The combined organic fractions were then washed once with brine (150 mL), dried over sodium sulfate, filtered, and concentrated on a rotary evaporator. The crude product was purified by column chromatography (120-g column; gradient: 1.5 column volumes dichloromethane, ramp up to 88:12 dichloromethane:acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield). 1H NMR (400 MHz, CDCl3)δ ppm 8.07 (dd, J=14.1, 7.7 Hz, 1H), 7.57 (t, J=7.5 Hz, 1H), 7.46-7.37 (m, 1H), 7.30 (t, J=8.3 Hz, 1H), 7.24-7.18 (m, 1H), 6.60 (d, J=8.4 Hz, 2H), 3.98-3.77 (m, 4H), 3.70 (s, 6H), 1.17 (t, J=7.1 Hz, 6H). 31P NMR (CDCl3, 202 MHz) δ ppm 15.2 (s). To a 250-mL round-bottom flask equipped with a magnetic stir bar Degassed anhydrous tetrahydrofuran was added (80 mL) The reaction flask was warmed to 0° C. at which point the slurry The reaction was stirred for 90 minutes at 0° C. The reaction was re-cooled to −78° C. stirred for 1 hour the cooling bath was removed the flask was warmed to room temperature At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL) by separating the phases washing the aqueous layer with ethyl acetate (4×60 mL) The combined organic fractions were then washed once with brine (150 mL) dried over sodium sulfate filtered concentrated on a rotary evaporator The crude product was purified by column chromatography (120-g column acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield)

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 250-mL round-bottom flask equipped with a magnetic stir bar was added 2′-bromo-2,6-dimethoxybiphenyl (see Buchwald SL, Journal of the American Chemical Society 2005;127:4685-4696)(7.02 g, 24.0 mmol, 1 equiv). Degassed, anhydrous tetrahydrofuran was added (80 mL) followed by N,N,N′,N′-tetramethylethylene-1,2-diamine (4.31 mL, 28.7 mmol, 1.2 equiv). The resulting solution was cooled to −78 ° C., and then n-butyllithium (11.5 mL, 28.7 mmol, 1.2 equiv, 2.5 M hexanes) was added in a dropwise fashion. After the addition of 5 mL of n-butyllithium the reaction slurry could no longer be stirred. The reaction flask was warmed to 0 ° C. at which point the slurry became free-flowing. The remainder of the n-butyllithium (˜6.5 mL) was added over the course of 10 minutes. The reaction was stirred for 90 minutes at 0 ° C., and then the aryllithium intermediate was quenched with diethyl chlorophosphate (4.15 mL, 28.7 mmol, 1.2 equiv). To a 250-mL round-bottom flask equipped with a magnetic stir bar Degassed anhydrous tetrahydrofuran was added (80 mL) The reaction flask was warmed to 0 ° C. at which point the slurry The reaction was stirred for 90 minutes at 0 ° C.

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 250-mL round-bottom flask equipped with a magnetic stir bar was added 2′-bromo-2,6-dimethoxybiphenyl (see Buchwald S L, Journal of the American Chemical Society 2005; 127:4685-4696) (7.02 g, 24.0 mmol, 1 equiv). Degassed, anhydrous tetrahydrofuran was added (80 mL) followed by N,N,N′,N′-tetramethylethylene-1,2-diamine (4.31 mL, 28.7 mmol, 1.2 equiv). The resulting solution was cooled to −78° C., and then n-butyllithium (11.5 mL, 28.7 mmol, 1.2 equiv, 2.5 M in hexanes) was added in a dropwise fashion. After the addition of 5 mL of n-butyllithium the reaction slurry could no longer be stirred. The reaction flask was warmed to 0° C. at which point the slurry became free-flowing. The remainder of the n-butyllithium (˜6.5 mL) was added over the course of 10 minutes. The reaction was stirred for 90 minutes at 0° C., and then the aryllithium intermediate was quenched with diethyl chlorophosphate (4.15 mL, 28.7 mmol, 1.2 equiv). The reaction was re-cooled to −78° C. and stirred for 1 hour, then the cooling bath was removed and the flask was warmed to room temperature. At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL). The reaction mixture was worked up by separating the phases and washing the aqueous layer with ethyl acetate (4×60 mL). The combined organic fractions were then washed once with brine (150 mL), dried over sodium sulfate, filtered, and concentrated on a rotary evaporator. The crude product was purified by column chromatography (120-g column; gradient: 1.5 column volumes dichloromethane, ramp up to 88:12 dichloromethane:acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield). 1H NMR (400 MHz, CDCl3) δ ppm 8.07 (dd, J=14.1, 7.7 Hz, 1H), 7.57 (t, J=7.5 Hz, 1H), 7.46-7.37 (m, 1H), 7.30 (t, J=8.3 Hz, 1H), 7.24-7.18 (m, 1H), 6.60 (d, J=8.4 Hz, 2H), 3.98-3.77 (m, 4H), 3.70 (s, 6H), 1.17 (t, J=7.1 Hz, 6H). 31P NMR (CDCl3, 202 MHz) δ ppm 15.2 (s). To a 250-mL round-bottom flask equipped with a magnetic stir bar Degassed anhydrous tetrahydrofuran was added (80 mL) The reaction flask was warmed to 0° C. at which point the slurry The reaction was stirred for 90 minutes at 0° C. The reaction was re-cooled to −78° C. stirred for 1 hour the cooling bath was removed the flask was warmed to room temperature At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL) by separating the phases washing the aqueous layer with ethyl acetate (4×60 mL) The combined organic fractions were then washed once with brine (150 mL) dried over sodium sulfate filtered concentrated on a rotary evaporator The crude product was purified by column chromatography (120-g column acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield)

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 250-mL round-bottom flask equipped with a magnetic stir bar was added 2′-bromo-2,6-dimethoxybiphenyl (see Buchwald S L, Journal of the American Chemical Society 2005; 127:4685-4696) (7.02 g, 24.0 mmol, 1 equiv). Degassed, anhydrous tetrahydrofuran was added (80 mL) followed by N,N,N′,N′-tetramethylethylene-1,2-diamine (4.31 mL, 28.7 mmol, 1.2 equiv). The resulting solution was cooled to −78° C., and then n-butyllithium (11.5 mL, 28.7 mmol, 1.2 equiv, 2.5 M in hexanes) was added in a dropwise fashion. After the addition of 5 mL of n-butyllithium the reaction slurry could no longer be stirred. The reaction flask was warmed to 0° C. at which point the slurry became free-flowing. The remainder of the n-butyllithium (˜6.5 mL) was added over the course of 10 minutes. The reaction was stirred for 90 minutes at 0° C., and then the aryllithium intermediate was quenched with diethyl chlorophosphate (4.15 mL, 28.7 mmol, 1.2 equiv). The reaction was re-cooled to −78° C. and stirred for 1 hour, then the cooling bath was removed and the flask was warmed to room temperature. At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL). The reaction mixture was worked up by separating the phases and washing the aqueous layer with ethyl acetate (4×60 mL). The combined organic fractions were then washed once with brine (150 mL), dried over sodium sulfate, filtered, and concentrated on a rotary evaporator. The crude product was purified by column chromatography (120-g column; gradient: 1.5 column volumes dichloromethane, ramp up to 88:12 dichloromethane:acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield). 1H NMR (400 MHz, CDCl3) δ ppm 8.07 (dd, J=14.1, 7.7 Hz, 1H), 7.57 (t, J=7.5 Hz, 1H), 7.46-7.37 (m, 1H), 7.30 (t, J=8.3 Hz, 1H), 7.24-7.18 (m, 1H), 6.60 (d, J=8.4 Hz, 2H), 3.98-3.77 (m, 4H), 3.70 (s, 6H), 1.17 (t, J=7.1 Hz, 6H). 31P NMR (CDCl3, 202 MHz) δ ppm 15.2 (s). To a 250-mL round-bottom flask equipped with a magnetic stir bar Degassed anhydrous tetrahydrofuran was added (80 mL) The reaction flask was warmed to 0° C. at which point the slurry The reaction was stirred for 90 minutes at 0° C. The reaction was re-cooled to −78° C. stirred for 1 hour the cooling bath was removed the flask was warmed to room temperature At that point, the reaction solution was diluted with pH 7 phosphate buffer (100 mL) by separating the phases washing the aqueous layer with ethyl acetate (4×60 mL) The combined organic fractions were then washed once with brine (150 mL) dried over sodium sulfate filtered concentrated on a rotary evaporator The crude product was purified by column chromatography (120-g column acetone over 10.5 column volumes, hold at 88:12 for 6 column volumes), the product was isolated as a white solid (5.49 g, 78 area % by HPLC, 65% yield)