3-溴甲基-3-甲基-1-氧杂环丁烷

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a slurry of (S)-2-amino-1′-bromo-7′-(pyridin-3-yl)-5H-spiro[oxazole-4,9′-xanthen]-2′-ol (710 mg, 1.674 mmol), cesium carbonate (1091 mg, 3.35 mmol) and potassium iodide (306 mg, 1.841 mmol) in DMF (6694 μL, 1.674 mmol) at 0° C. was added 3-(bromomethyl)-3-methyloxetane (304 mg, 1.841 mmol). The reaction was removed from the ice bath and allowed to warm to rt. Reaction was allowed to stir at rt overnight before being diluted with water (250 mL) and poured into a separatory funnel containing ethyl acetate (100 mL). The layers were separated and the aqueous layer was extracted with ethyl acetate (2×100 mL). The combined organic layers were washed with brine, dried over sodium sulfate, filtered and concentrated in vacuo to provide a red oil that was purified by silica gel chromatography (Redi-Sep pre-packed silica gel column (40 g), 0-100% CH2Cl2 to 10:1 methanol in methylenechloride with 0.1% ammonium hydroxide) to provide (S)-1′-bromo-2′-((3-methyloxetan-3-yl)methoxy)-7′-(pyridin-3-yl)-5H-spiro[oxazole-4,9′-xanthen]-2-amine as an off white solid. MS m/z=508.0 [M+H]. The reaction was removed from the ice bath Reaction poured into a separatory funnel The layers were separated the aqueous layer was extracted with ethyl acetate (2×100 mL) The combined organic layers were washed with brine dried over sodium sulfate filtered concentrated in vacuo to provide a red oil that was purified by silica gel chromatography (Redi-Sep pre-packed silica gel column (40 g), 0-100% CH2Cl2 to 10:1 methanol in methylenechloride with 0.1% ammonium hydroxide)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a manner similar to that described above, 12.0 grams of 3-bromomethyl-3-methyloxetane (73 mmol) was reacted with 26.5 grams of 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctan-1-ol (72.7 mmol) in 300 milliliters of dimethylformamide in the presence of 3.9 grams of a 50 weight percent dispersion of sodium hydride (81 mmol) in mineral oil at 85° C. for 24 hours to give 21.5 grams (70% yield) of 3-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyloxymethyl)-3-methyloxetane, a colorless oil with a boiling point of 66°-68° C./2-2.5 mm-Hg; 1H NMR (CDCl3) δ4.50 and 4.36 (AB, J=5.5 Hz, 4H), 3.78 (t, J=6.6 Hz, 2H), 3.53 (s, 2H), 2.42 (triplet of triplets, J=6.6 and 18 Hz, 2 H), and 1.31 (s, 3 H); 13C NMR (CDCl3) δ79.89, 78.30, 63.31, 39.9, 31.64 (t), and 21.1 (signals due to carbons bearing fluorines are not included due to the complex splitting patterns and low peak intensities); 19F NMR δ-81.4 (3F), -113.8 (2F), -118.2 (2F), -112.3 (2F), -124.1 (2F) and -126.7 (2F). The elemental analysis was: Calculated for C13H13F13O2 : C, 34.8; H, 2.9; F, 55.1. Found: C, 35.1; H, 3.0; F, 54.7.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a manner similar to that described above, 12.0 grams of 3-bromomethyl-3-methyloxetane (73 mmol) was reacted with 26.5 grams of 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctan-1-ol (72.7 mmol) in 300 milliliters of dimethylformamide in the presence of 3.9 grams of a 50 weight percent dispersion of sodium hydride (81 mmol) in mineral oil at 85° C. for 24 hours to give 21.5 grams (70% yield) of 3-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyloxymethyl)-3-methyloxetane, a colorless oil with a boiling point of 66°-68° C./2-2.5 mm-Hg; 1H NMR (CDCl3) δ4.50 and 4.36 (AB, J=5.5 Hz, 4H), 3.78 (t, J=6.6 Hz, 2H), 3.53 (s, 2H), 2.42 (triplet of triplets, J=6.6 and 18 Hz, 2 H), and 1.31 (s, 3 H); 13C NMR (CDCl3) δ79.89, 78.30, 63.31, 39.9, 31.64 (t), and 21.1 (signals due to carbons bearing fluorines are not included due to the complex splitting patterns and low peak intensities); 19F NMR δ-81.4 (3F), -113.8 (2F), -118.2 (2F), -112.3 (2F), -124.1 (2F) and -126.7 (2F). The elemental analysis was: Calculated for C13H13F13O2 : C, 34.8; H, 2.9; F, 55.1. Found: C, 35.1; H, 3.0; F, 54.7.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of 4-bromo-3,5-dimethylphenol (3.0 g) and K2CO3 (5.5 g) in N,N-dimethylformamide (10 mL) is added 3-(bromomethyl)-3-methyloxetane (2.95 g). The mixture is stirred for 12 hours at room temperature and then partitioned between saturated aqueous NaHCO3 solution and ethyl acetate. The aqueous phase is extracted with ethyl acetate and the combined organic phases are dried (MgSO4). The solvent is evaporated and the residue is chromatographed on silica gel (cyclohexane/ethyl acetate 100:0→70:30) to give the title compound. Yield: 3.5 g; LC (method 4): tR=1.81 min; Mass spectrum (ESI+): m/z=285 [M+H]+. partitioned between saturated aqueous NaHCO3 solution and ethyl acetate The aqueous phase is extracted with ethyl acetate the combined organic phases are dried (MgSO4) The solvent is evaporated the residue is chromatographed on silica gel (cyclohexane/ethyl acetate 100:0→70:30)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Prepared according to the general procedure described in Example 86, by reacting 4-methoxy-3-(1H-pyrazol-4-yl)-1-trityl-1H-pyrazolo[4,3-c]pyridine with 3-(bromomethyl)-3-methyloxetane to give the title compound (23.1 mg, 35% over two steps). LC-MS (Method G): m/z=300.0 [M+H]+; 2.54 min. 1H-NMR (400 MHz, DMSO) δ 8.75 (s, 2H), 7.47 (d, J=5.8, 1H), 7.00 (d, J=6.0, 1H), 4.54 (d, J=11.7, 2H), 4.31 (d, J=11.8, 2H), 4.01 (s, 2H), 3.50 (s, 5H), 1.31 (s, 3H). Prepared

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a manner similar to the that of Example B14, a mixture of 3-bromomethyl-3-methyloxetane (468 g, 2.84 mol), 2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctan-1-ol (1032 g, 2.58 mol), tetrabutylammonium bromide (41.5 g), potassium hydroxide (208 g, 3.23 mol), and water (1680 ml) was heated under reflux for 3 hours. GLC analysis revealed complete consumption of starting materials. The reaction mixture was diluted with water, worked-up in the usual manner, and distilled under reduced pressure to give 1,085 g of 15-FOX, representing an-overall yield of 87%; bp 82° C./0.1 mm-Hg. The distilled material was >99% pure as indicated by GLC and was used in subsequent polymerization reactions. was heated under reflux for 3 hours consumption of starting materials The reaction mixture was diluted with water distilled under reduced pressure to give 1,085 g of 15-FOX, was used in subsequent polymerization reactions

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a manner similar to that described above, 12.0 grams of 3-bromomethyl-3-methyloxetane (73 mmol) was reacted with 26.5 grams of 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctan-1-ol (72.7 mmol) in 300 milliliters of dimethylformamide in the presence of 3.9 grams of a 50 weight percent dispersion of sodium hydride (81 mmol) in mineral oil at 85° C. for 24 hours to give 21.5 grams (70% yield) of 3-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyloxymethyl)-3-methyloxetane, a colorless oil with a boiling point of 66-68° C./2-2.5 mm-Hg; 1H NMR (CDCl3) δ 4.50 and 4.36 (AB, J=5.5 Hz, 4 H), 3.78 (t, J=6.6 Hz, 2 H), 3.53 (s, 2 H), 2.42 (triplet of triplets, J=6.6 and 18 Hz, 2 H), and 1.31 (s, 3 H); 13C NMR (CDCl3) δ 79.89, 78.30, 63.31, 39.9, 31.64 (t), and 21.1 (signals due to carbons bearing fluorines are not included due to the complex splitting patterns and low peak intensities); 19F NMR δ −81.4 (3 F), −113.8 (2 F), −118.2 (2 F), −112.3 (2 F), −124.1 (2 F) and −126.7 (2 F). The elemental analysis was: Calculated for C13H13F13O2: C, 34.8; H, 2.9; F, 55.1. Found: C, 35.1; H, 3.0; F, 54.7.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a manner similar to that described above, 12.0 grams of 3-bromomethyl-3-methyloxetane (73 mmol) was reacted with 26.5 grams of 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctan-1-ol (72.7 mmol) in 300 milliliters of dimethylformamide in the presence of 3.9 grams of a 50 weight percent dispersion of sodium hydride (81 mmol) in mineral oil at 85° C. for 24 hours to give 21.5 grams (70% yield) of 3-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyloxymethyl)-3-methyloxetane, a colorless oil with a boiling point of 66-68° C./2-2.5 mm-Hg; 1H NMR (CDCl3) δ 4.50 and 4.36 (AB, J=5.5 Hz, 4 H), 3.78 (t, J=6.6 Hz, 2 H), 3.53 (s, 2 H), 2.42 (triplet of triplets, J=6.6 and 18 Hz, 2 H), and 1.31 (s, 3 H); 13C NMR (CDCl3) δ 79.89, 78.30, 63.31, 39.9, 31.64 (t), and 21.1 (signals due to carbons bearing fluorines are not included due to the complex splitting patterns and low peak intensities); 19F NMR δ −81.4 (3 F), −113.8 (2 F), −118.2 (2 F), −112.3 (2 F), −124.1 (2 F) and −126.7 (2 F). The elemental analysis was: Calculated for C13H13F13O2: C, 34.8; H, 2.9; F, 55.1. Found: C, 35.1; H, 3.0; F, 54.7.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 5 liter jacketed flask equipped with a mechanical stirrer was charged with 1062 grams of sodium azide, 1972 ml of water, and 2450 grams of 3-bromomethyl-3-methyloxetane (supplied by AmeriBrom, Inc. of New York). This mixture was brought to reflux with vigorous mixing. After 48 hours the mixture was cooled to room temperature. The organic layer was separated off and washed three times with 1000 ml of water before being dried over molecular sieves to yield pure 3-azidomethyl-3-methyloxetane at 85% yield. equipped with a mechanical stirrer to reflux with vigorous mixing The organic layer was separated off washed three times with 1000 ml of water before being dried over molecular sieves

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 5 liter jacketed flask equipped with a mechanical stirrer was charged with 1062 grams of sodium azide, 1972 ml of water, and 2450 grams of 3-bromomethyl-3-methyloxetane (supplied by AmeriBrom, Inc. of New York). This mixture was brought to reflux with vigorous mixing. After 48 hours the mixture was cooled to room temperature. The organic layer was separated off and washed three times with 1000 ml of water before being dried over molecular sieves to yield pure 3-azidomethyl-3-methyloxetane at 85% yield. equipped with a mechanical stirrer to reflux with vigorous mixing The organic layer was separated off washed three times with 1000 ml of water before being dried over molecular sieves