1-(3-氯丙基)-3,4-二氢喹啉-2-one

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of NaH in mineral oil (55-60%)(712 mg) was added to a solution of 3,4-dihydro-1H-quinolin-2-one (2.0 g, 13.6 mmol) in N,N-dimethylformamide (50 mL) at 0° C. The reaction mixture was stirred at 0° C. for 1 h. then 1-bromo-3-chloropropane (1.34 mL, 13.6 mmol) was added. The slurry was stirred for additional 16 h. at ambient temperature then water (50 mL) was added and the product was extracted with diethyl ether (2×50 mL). The organic layer was dried (Na2SO4) and concentrated in vacuo. The product was purified by flash-chromatography (eluent: dichloromethane) to give 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol). KI (2.5 g, 15 mmol), K2CO3 (2.1 g, 15 mmol) and 4-butylpiperidine (1.8 mL, 15 mmol) were added to a solution of 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol) in acetonitrile (50 mL). The reaction mixture was 60° C. for 16 h. The acetonitrile was evaporated in vacuo, water (50 mL) was added and the product was extracted with ethyl acetate (2×50 mL). The organic layer was dried (Na2SO4), filtered and concentrated in vacuo. Purification by flash-chromatography (eluent: ethyl acetate) gave the title product. Yield 2.06 g, 58%. Oxalate-salt was prepared from oxalic acid (1.1 eq.) in acetone. HPLC-MS: M+1+=329.5 (UV/MS(%)=100/100). 1H NMR (400 MHz, CD3OD): δ=0.89 (3H, t), 1.12-1.36 (9H, m), 1.67 (2H, broad d), 1.83 (2H, quin.), 1.97 (2H, broad t), 2.41 (2H, t), 2.59 (2H, t), 2.84-2.96 (4H, m), 3.99 (2H, t), 7.02 (1H, broad t), 7.16 (1H, broad d), 7.20 (1H, broad d), 7.25 (1H, broad t). 13C NMR (CD3OD): δ 13.2, 22.8, 24.3, 25.0, 28.9, 31.6, 31.9 (2C), 35.6, 36.2, 40.1, 53.8 (2C), 55.9, 115,2, 123.2, 127.0, 127.4, 127.9, 139.1, 171.5 The slurry was stirred for additional 16 h. at ambient temperature the product was extracted with diethyl ether (2×50 mL) The organic layer was dried (Na2SO4) concentrated in vacuo The product was purified by flash-chromatography (eluent: dichloromethane)

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 4 mL vial was charged with crude 1-(3-chloro-propyl)-3,4-dihydro-1H-quinolin-2-one (85LM31) (0.200 g), 4-propoxy-piperidine (79KS-66) (0.130 g, 0.897 mmol), potassium carbonate (0.247 g, 1.79 mmol) and sodium iodide (0.269 g, 1.79 mmol) in MeCN (2 mL) and shaken at 50° C. for 20 h. The reaction mixture was quenched with water (1 mL), and the product was extracted into EtOAc (3×1 mL). The combined organic layers were dried over Na2SO4, evaporated and purified by flash CC (SiO2; MeOH/DCM 0:1→3:7) to give the title compound (85LM32) (0.012 g, total yield 3%). 1H NMR (CDCl3) δ 7.25 (t, J=7.4 Hz, 1H), 7.18-7.08 (m, 2H), 6.98 (t, J=7.4 Hz, 1H), 3.98 (t, J=7.6 Hz, CH2), 3.38 (t, J=6.8 Hz, CH2), 3.35-3.25 (m, 1H), 2.87 (t, J=7.6 Hz, CH2), 2.80-2.70 (m, 2H), 2.65-2.60 (m, 2H), 2.45-2.35 (m, 2H), 2.20-2.10 (m, 2H), 1.95-1.80 (m, 4H), 1.65-1.50 (m, 4H), 0.95 (t, J=7.6 Hz, CH3); 13C NMR (CDCl3) δ 170.2, 140.0, 128.2, 127.5, 126.6, 122.8, 115.3, 70.0, 56.0, 51.8, 40.5, 32.0, 31.5, 25.8, 25.2, 22.8, 10.7; HPLC-MS (ammonium acetate) [M+H]+=331.3. The reaction mixture was quenched with water (1 mL) the product was extracted into EtOAc (3×1 mL) The combined organic layers were dried over Na2SO4 evaporated purified by flash CC (SiO2; MeOH/DCM 0:1→3:7)

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 4 mL vial was charged with crude 1-(3-chloro-propyl)-3,4-dihydro-1H-quinolin-2-one (85LM31) (0.200 g), 4-propoxy-piperidine (79KS-66) (0.130 g, 0.897 mmol), potassium carbonate (0.247 g, 1.79 mmol) and sodium iodide (0.269 g, 1.79 mmol) in MeCN (2 mL) and shaken at 50° C. for 20 h. The reaction mixture was quenched with water (1 mL), and the product was extracted into EtOAc (3×1 mL). The combined organic layers were dried over Na2SO4, evaporated and purified by flash CC (SiO2; MeOH/DCM 0:1→3:7) to give the title compound (85LM32) (0.012 g, total yield 3%). 1H NMR (CDCl3) δ 7.25 (t, J=7.4 Hz, 1H), 7.18-7.08 (m, 2H), 6.98 (t, J=7.4 Hz, 1H), 3.98 (t, J=7.6 Hz, CH2), 3.38 (t, J=6.8 Hz, CH2), 3.35-3.25 (m, 1H), 2.87 (t, J=7.6 Hz, CH2), 2.80-2.70 (m, 2H), 2.65-2.60 (m, 2H), 2.45-2.35 (m, 2H), 2.20-2.10 (m, 2H), 1.95-1.80 (m, 4H), 1.65-1.50 (m, 4H), 0.95 (t, J=7.6 Hz, CH3); 13C NMR (CDCl3) δ 170.2, 140.0, 128.2, 127.5, 126.6, 122.8, 115.3, 70.0, 56.0, 51.8, 40.5, 32.0, 31.5, 25.8, 25.2, 22.8, 10.7; HPLC-MS (ammonium acetate) [M+H]+=331.3. The reaction mixture was quenched with water (1 mL) the product was extracted into EtOAc (3×1 mL) The combined organic layers were dried over Na2SO4 evaporated purified by flash CC (SiO2; MeOH/DCM 0:1→3:7)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 50 mL flask was charged with 3,4-dihydro-1H-quinolin-2-one (2.00 g, 13.6 mmol) and sodium hydride (60% in oil, 0.712 g, 16.3 mmol) in DMF (50 mL, dry) and stirred at 0° C. for 1 h, followed by addition of 1-chloro-3-iodo-propane (2.77 g, 13.6 mmol) and stirring at rt for 20 h. The reaction mixture was quenched with water (10 mL), and the product was extracted into EtOEt (3×25 mL). The combined organic layers were dried (Na2SO4), evaporated and purified by flash CC (SiO2; EtOAc/heptane 1:4) to give the crude title compound (85LM31) (2.25 g). 1H NMR (CDCl3) δ 7.29-7.22 (m, 1H), 7.17 (d, J=7.4 Hz, 1H), 7.08-6.98 (m, 2H), 4.10 (t, J=7.3 Hz, CH2), 3.62 (t, J=5.9 Hz, CH2), 2.88 (t, J=7.3 Hz, CH2), 2.63 (t, J=7.3 Hz, CH2), 2.19-2.10 (m, 2H); 13C NMR (CDCl3) δ 170.5, 140.0, 128.2, 127.8, 126.3, 123.2, 115.0, 43.3, 40.2, 32.2, 30.5, 26.0. stirring at rt for 20 h The reaction mixture was quenched with water (10 mL) the product was extracted into EtOEt (3×25 mL) The combined organic layers were dried (Na2SO4) evaporated purified by flash CC (SiO2; EtOAc/heptane 1:4)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 50 mL flask was charged with 3,4-dihydro-1H-quinolin-2-one (2.00 g, 13.6 mmol) and sodium hydride (60% in oil, 0.712 g, 16.3 mmol) in DMF (50 mL, dry) and stirred at 0° C. for 1 h, followed by addition of 1-chloro-3-iodo-propane (2.77 g, 13.6 mmol) and stirring at rt for 20 h. The reaction mixture was quenched with water (10 mL), and the product was extracted into EtOEt (3×25 mL). The combined organic layers were dried (Na2SO4), evaporated and purified by flash CC (SiO2; EtOAc/heptane 1:4) to give the crude title compound (85LM31) (2.25 g). 1H NMR (CDCl3) δ 7.29-7.22 (m, 1H), 7.17 (d, J=7.4 Hz, 1H), 7.08-6.98 (m, 2H), 4.10 (t, J=7.3 Hz, CH2), 3.62 (t, J=5.9 Hz, CH2), 2.88 (t, J=7.3 Hz, CH2), 2.63 (t, J=7.3 Hz, CH2), 2.19-2.10 (m, 2H); 13C NMR (CDCl3) δ 170.5, 140.0, 128.2, 127.8, 126.3, 123.2, 115.0, 43.3, 40.2, 32.2, 30.5, 26.0. stirring at rt for 20 h The reaction mixture was quenched with water (10 mL) the product was extracted into EtOEt (3×25 mL) The combined organic layers were dried (Na2SO4) evaporated purified by flash CC (SiO2; EtOAc/heptane 1:4)

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of NaH in mineral oil (55-60%) (712 mg) was added to a solution of 3,4-dihydro-1H-quinolin-2-one (2.0 g, 13.6 mmol) in N,N-dimethylformamide (50 mL) at 0° C. The reaction mixture was stirred at 0° C. for 1 h. then 1-bromo-3-chloropropane (1.34 mL, 13.6 mmol) was added. The slurry was stirred for additional 16 h. at ambient temperature then water (50 mL) was added and the product was extracted with diethyl ether (2×50 mL). The organic layer was dried (Na2SO4) and concentrated in vacuo. The product was purified by flash-chromatography (eluent: dichloromethane) to give 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol). KI (2.5 g, 15 mmol), K2CO3 (2.1 g, 15 mmol) and 4-butylpiperidine (1.8 mL, 15 mmol) were added to a solution of 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol) in acetonitrile (50 mL). The reaction mixture was stirred at 60° C. for 16 h. The acetonitrile was evaporated in vacuo, water (50 mL) was added and the product was extracted with ethyl acetate (2×50 mL). The organic layer was dried (Na2SO4), filtered and concentrated in vacuo. Purification by flash-chromatography (eluent: ethyl acetate) gave the title product. Yield: 2.06 g, 58%. Oxalate-salt was prepared from oxalic acid (1.1 eq.) in acetone. HPLC-MS: M+1+=329.5 (UV/MS(%)=100/100). 1H NMR (400 MHz, CD3OD): δ=0.89 (3H, t), 1.12-1.36 (9H, m), 1.67 (2H, broad d), 1.83 (2H, quin.), 1.97 (2H, broad t), 2.41 (2H, t), 2.59 (2H, t), 2.84-2.96 (4H, m), 3.99 (2H, t), 7.02 (1H, broad t), 7.16 (1H, broad d), 7.20 (1H, broad d), 7.25 (1H, broad t). 13C NMR (CD3OD): δ 13.2, 22.8, 24.3, 25.0, 28.9, 31.6, 31.9 (2C), 35.6, 36.2, 40.1, 53.8 (2C), 55.9, 115.2, 123.2, 127.0, 127.4, 127.9, 139.1, 171.5 The acetonitrile was evaporated in vacuo, water (50 mL) was added the product was extracted with ethyl acetate (2×50 mL) The organic layer was dried (Na2SO4) filtered concentrated in vacuo Purification by flash-chromatography (eluent: ethyl acetate)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of NaH in mineral oil (55-60%) (712 mg) was added to a solution of 3,4-dihydro-1H-quinolin-2-one (2.0 g, 13.6 mmol) in N,N-dimethylformamide (50 mL) at 0° C. The reaction mixture was stirred at 0° C. for 1 h. then 1-bromo-3-chloropropane (1.34 mL, 13.6 mmol) was added. The slurry was stirred for additional 16 h. at ambient temperature then water (50 mL) was added and the product was extracted with diethyl ether (2×50 mL). The organic layer was dried (Na2SO4) and concentrated in vacuo. The product was purified by flash-chromatography (eluent: dichloromethane) to give 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol). KI (2.5 g, 15 mmol), K2CO3 (2.1 g, 15 mmol) and 4-butylpiperidine (1.8 mL, 15 mmol) were added to a solution of 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol) in acetonitrile (50 mL). The reaction mixture was stirred at 60° C. for 16 h. The acetonitrile was evaporated in vacuo, water (50 mL) was added and the product was extracted with ethyl acetate (2×50 mL). The organic layer was dried (Na2SO4), filtered and concentrated in vacuo. Purification by flash-chromatography (eluent: ethyl acetate) gave the title product. Yield: 2.06 g, 58%. Oxalate-salt was prepared from oxalic acid (1.1 eq.) in acetone. HPLC-MS: M+1+=329.5 (UV/MS(%)=100/100). 1H NMR (400 MHz, CD3OD): δ=0.89 (3H, t), 1.12-1.36 (9H, m), 1.67 (2H, broad d), 1.83 (2H, quin.), 1.97 (2H, broad t), 2.41 (2H, t), 2.59 (2H, t), 2.84-2.96 (4H, m), 3.99 (2H, t), 7.02 (1H, broad t), 7.16 (1H, broad d), 7.20 (1H, broad d), 7.25 (1H, broad t). 13C NMR (CD3OD): δ 13.2, 22.8, 24.3, 25.0, 28.9, 31.6, 31.9 (2C), 35.6, 36.2, 40.1, 53.8 (2C), 55.9, 115.2, 123.2, 127.0, 127.4, 127.9, 139.1, 171.5 The slurry was stirred for additional 16 h. at ambient temperature the product was extracted with diethyl ether (2×50 mL) The organic layer was dried (Na2SO4) concentrated in vacuo The product was purified by flash-chromatography (eluent: dichloromethane)

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 4 mL vial was charged with crude 1-(3-chloro-propyl)-3,4-dihydro-1H-quinolin-2-one (85LM31) (0.200 g), 4-propoxy-piperidine (79KS-66) (0.130 g, 0.897 mmol), potassium carbonate (0.247 g, 1.79 mmol) and sodium iodide (0.269 g, 1.79 mmol) in MeCN (2 mL) and shaken at 50° C. for 20 h. The reaction mixture was quenched with water (1 mL), and the product was extracted into EtOAc (3×1 mL). The combined organic layers were dried over Na2SO4, evaporated and purified by flash CC (SiO2; MeOH/DCM 0:1→3:7) to give the title compound (85LM32) (0.012 g, total yield 3%). 1H NMR (CDCl3) δ 7.25 (t, J=7.4 Hz, 1H), 7.18-7.08 (m, 2H), 6.98 (t, J=7.4 Hz, 1H), 3.98 (t, J=7.6 Hz, CH2), 3.38 (t, J=6.8 Hz, CH2), 3.35-3.25 (m, 1H), 2.87 (t, J=7.6 Hz, CH2), 2.80-2.70 (m, 2H), 2.65-2.60 (m, 2H), 2.45-2.35 (m, 2H), 2.20-2.10 (m, 2H), 1.95-1.80 (m, 4H), 1.65-1.50 (m, 4H), 0.95 (t, J=7.6 Hz, CH3); 13C NMR (CDCl3) δ 170.2, 140.0, 128.2, 127.5, 126.6, 122.8, 115.3, 70.0, 56.0, 51.8, 40.5, 32.0, 31.5, 25.8, 25.2, 22.8, 10.7; HPLC-MS (ammonium acetate) [M+H]+=331.3. The reaction mixture was quenched with water (1 mL) the product was extracted into EtOAc (3×1 mL) The combined organic layers were dried over Na2SO4 evaporated purified by flash CC (SiO2; MeOH/DCM 0:1→3:7)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 50 mL flask was charged with 3,4-dihydro-1H-quinolin-2-one (2.00 g, 13.6 mmol) and sodium hydride (60% in oil, 0.712 g, 16.3 mmol) in DMF (50 mL, dry) and stirred at 0° C. for 1 h, followed by addition of 1-chloro-3-iodo-propane (2.77 g, 13.6 mmol) and stirring at rt for 20 h. The reaction mixture was quenched with water (10 mL), and the product was extracted into EtOEt (3×25 mL). The combined organic layers were dried (Na2SO4), evaporated and purified by flash CC (SiO2; EtOAc/heptane 1:4) to give the crude title compound (85LM31) (2.25 g). 1H NMR (CDCl3) δ 7.29-7.22 (m, 1H), 7.17 (d, J=7.4 Hz, 1H), 7.08-6.98 (m, 2H), 4.10 (t, J=7.3 Hz, CH2), 3.62 (t, J=5.9 Hz, CH2), 2.88 (t, J=7.3 Hz, CH2), 2.63 (t, J=7.3 Hz, CH2), 2.19-2.10 (m, 2H); 13C NMR (CDCl3) δ 170.5, 140.0, 128.2, 127.8, 126.3, 123.2, 115.0, 43.3, 40.2, 32.2, 30.5, 26.0. stirring at rt for 20 h The reaction mixture was quenched with water (10 mL) the product was extracted into EtOEt (3×25 mL) The combined organic layers were dried (Na2SO4) evaporated purified by flash CC (SiO2; EtOAc/heptane 1:4)

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of NaH in mineral oil (55-60%) (712 mg) was added to a solution of 3,4-dihydro-1H-quinolin-2-one (2.0 g, 13.6 mmol) in N,N-dimethylformamide (50 mL) at 0° C. The reaction mixture was stirred at 0° C. for 1 h. then 1-bromo-3-chloropropane (1.34 mL, 13.6 mmol) was added. The slurry was stirred for additional 16 h. at ambient temperature then water (50 mL) was added and the product was extracted with diethyl ether (2×50 mL). The organic layer was dried (Na2SO4) and concentrated in vacuo. The product was purified by flash-chromatography (eluent: dichloromethane) to give 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol). KI (2.5 g, 15 mmol), K2CO3 (2.1 g, 15 mmol) and 4-butylpiperidine (1.8 mL, 15 mmol) were added to a solution of 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol) in acetonitrile (50 mL). The reaction mixture was stirred at 60° C. for 16 h. The acetonitrile was evaporated in vacuo, water (50 mL) was added and the product was extracted with ethyl acetate (2×50 mL). The organic layer was dried (Na2SO4), filtered and concentrated in vacuo. Purification by flash-chromatography (eluent: ethyl acetate) gave the title product. Yield: 2.06 g, 58%. Oxalate-salt was prepared from oxalic acid (1.1 eq.) in acetone. HPLC-MS: M+1+=329.5 (UV/MS(%)=100/100). 1H NMR (400 MHz, CD3OD): δ=0.89 (3H, t), 1.12-1.36 (9H, m), 1.67 (2H, broad d), 1.83 (2H, quin.), 1.97 (2H, broad t), 2.41 (2H, t), 2.59 (2H, t), 2.84-2.96 (4H, m), 3.99 (2H, t), 7.02 (1H, broad t), 7.16 (1H, broad d), 7.20 (1H, broad d), 7.25 (1H, broad t). 13C NMR (CD3OD): δ 13.2, 22.8, 24.3, 25.0, 28.9, 31.6, 31.9 (2C), 35.6, 36.2, 40.1, 53.8 (2C), 55.9, 115.2, 123.2, 127.0, 127.4, 127.9, 139.1, 171.5 The acetonitrile was evaporated in vacuo, water (50 mL) was added the product was extracted with ethyl acetate (2×50 mL) The organic layer was dried (Na2SO4) filtered concentrated in vacuo Purification by flash-chromatography (eluent: ethyl acetate)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A suspension of NaH in mineral oil (55-60%) (712 mg) was added to a solution of 3,4-dihydro-1H-quinolin-2-one (2.0 g, 13.6 mmol) in N,N-dimethylformamide (50 mL) at 0° C. The reaction mixture was stirred at 0° C. for 1 h. then 1-bromo-3-chloropropane (1.34 mL, 13.6 mmol) was added. The slurry was stirred for additional 16 h. at ambient temperature then water (50 mL) was added and the product was extracted with diethyl ether (2×50 mL). The organic layer was dried (Na2SO4) and concentrated in vacuo. The product was purified by flash-chromatography (eluent: dichloromethane) to give 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol). KI (2.5 g, 15 mmol), K2CO3 (2.1 g, 15 mmol) and 4-butylpiperidine (1.8 mL, 15 mmol) were added to a solution of 1-[3-chloropropyl]-3,4-dihydro-1H-quinolin-2-one (2.41 g, 10.8 mmol) in acetonitrile (50 mL). The reaction mixture was stirred at 60° C. for 16 h. The acetonitrile was evaporated in vacuo, water (50 mL) was added and the product was extracted with ethyl acetate (2×50 mL). The organic layer was dried (Na2SO4), filtered and concentrated in vacuo. Purification by flash-chromatography (eluent: ethyl acetate) gave the title product. Yield: 2.06 g, 58%. Oxalate-salt was prepared from oxalic acid (1.1 eq.) in acetone. HPLC-MS: M+1+=329.5 (UV/MS(%)=100/100). 1H NMR (400 MHz, CD3OD): δ=0.89 (3H, t), 1.12-1.36 (9H, m), 1.67 (2H, broad d), 1.83 (2H, quin.), 1.97 (2H, broad t), 2.41 (2H, t), 2.59 (2H, t), 2.84-2.96 (4H, m), 3.99 (2H, t), 7.02 (1H, broad t), 7.16 (1H, broad d), 7.20 (1H, broad d), 7.25 (1H, broad t). 13C NMR (CD3OD): δ 13.2, 22.8, 24.3, 25.0, 28.9, 31.6, 31.9 (2C), 35.6, 36.2, 40.1, 53.8 (2C), 55.9, 115.2, 123.2, 127.0, 127.4, 127.9, 139.1, 171.5 The slurry was stirred for additional 16 h. at ambient temperature the product was extracted with diethyl ether (2×50 mL) The organic layer was dried (Na2SO4) concentrated in vacuo The product was purified by flash-chromatography (eluent: dichloromethane)

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 4 mL vial was charged with crude 1-(3-chloro-propyl)-3,4-dihydro-1H-quinolin-2-one (85LM31) (0.200 g), 4-propoxy-piperidine (79KS-66) (0.130 g, 0.897 mmol), potassium carbonate (0.247 g, 1.79 mmol) and sodium iodide (0.269 g, 1.79 mmol) in MeCN (2 mL) and shaken at 50° C. for 20 h. The reaction mixture was quenched with water (1 mL), and the product was extracted into EtOAc (3×1 mL). The combined organic layers were dried over Na2SO4, evaporated and purified by flash CC (SiO2; MeOH/DCM 0:1-3:7) to give the title compound (85LM32) (0.012 g, total yield 3%). 1H NMR (CDCl3) δ 7.25 (t, J=7.4 Hz, 1H), 7.18-7.08 (m, 2H), 6.98 (t, J=7.4 Hz, 1H), 3.98 (t, J=7.6 Hz, CH2), 3.38 (t, J=6.8 Hz, CH2), 3.35-3.25 (m, 1H), 2.87 (t, J=7.6 Hz, CH2), 2.80-2.70 (m, 2H), 2.65-2.60 (m, 2H), 2.45-2.35 (m, 2H), 2.20-2.10 (m, 2H), 1.95-1.80 (m, 4H), 1.65-1.50 (m, 4H), 0.95 (t, J=7.6 Hz, CH3); 13C NMR (CDCl3) δ 170.2, 140.0, 128.2, 127.5, 126.6, 122.8, 115.3, 70.0, 56.0, 51.8, 40.5, 32.0, 31.5, 25.8, 25.2, 22.8, 10.7; HPLC-MS (ammonium acetate) [M+H]+=331.3. The reaction mixture was quenched with water (1 mL) the product was extracted into EtOAc (3×1 mL) The combined organic layers were dried over Na2SO4 evaporated purified by flash CC (SiO2; MeOH/DCM 0:1-3:7)