1-(2,2-二甲氧基乙基)环丙-1-醇

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 2.0 L RBF containing 1-(2,2-dimethoxyethyl)cyclopropanol (17.400 g, 119 mmol) was added DCM (550 ml) and the mixture was allowed to stir at 0° C. for 15 min. 2,4,6-Collidine (63.1 ml, 476 mmol) was added and the reaction was allowed to chill for 5 min before the addition of tert-butyldimethylsilyl triflate (27.3 ml, 119 mmol) over 10 min. The reaction was allowed to stir for 20 min and then analyzed by tlc which showed that all of the tertiary alcohol had been protected as its TBS ether. So, triethylsilyl trifluoromethanesulfonate (53.8 ml, 238 mmol) was added via syringe over 10 min. After 20 min, tlc showed all of the material was converted to a baseline Rf material (mixed acetal) and then water (300 mL) was added and the reaction was allowed to stir overnight. The layers were separated. The DCM was washed with dilute HCl to remove the 2,4,6-collidine. The aq. layer was back extracted with DCM. The combined organics were washed with sodium bicarbonate, brine, dried with sodium sulfate and filtered though a plug of silica gel. Desired fractions were collected to give the product. to stir for 20 min After 20 min to stir overnight The layers were separated The DCM was washed with dilute HCl to remove the 2,4,6-collidine The aq. layer was back extracted with DCM The combined organics were washed with sodium bicarbonate, brine dried with sodium sulfate filtered though a plug of silica gel Desired fractions were collected to give the product

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 1.0 L RBF containing methyl 3,3-dimethoxypropanoate (17.6500 g, 119 mmol) was added THF (150 ml) and diethyl ether (150 ml), and the mixture was allowed to stir at 0° C. for 15 min. At this time, tetra-isopropoxy titanium (6.98 ml, 23.8 mmol) was added in one portion before the dropwise addition of ethylmagnesium bromide (99.3 ml, 298 mmol) via syringe. The reaction was allowed to warm to 23° C. and stir for 14 hours before being re-chilled to 0° C. After 5 min at this temp, water (15 ml) was added and a solid formed. Diethyl ether (200 ml) was added and the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate. The filtrate was dried with additional magnesium sulfate, filtered and concentrated to give a colorless oil. The crude material was used directly in the next reaction. to warm to 23° C. stir for 14 hours before being re-chilled to 0° C a solid formed the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate The filtrate was dried with additional magnesium sulfate filtered concentrated to give a colorless oil

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 1.0 L RBF containing methyl 3,3-dimethoxypropanoate (17.6500 g, 119 mmol) was added THF (150 ml) and diethyl ether (150 ml), and the mixture was allowed to stir at 0° C. for 15 min. At this time, tetra-isopropoxy titanium (6.98 ml, 23.8 mmol) was added in one portion before the dropwise addition of ethylmagnesium bromide (99.3 ml, 298 mmol) via syringe. The reaction was allowed to warm to 23° C. and stir for 14 hours before being re-chilled to 0° C. After 5 min at this temp, water (15 ml) was added and a solid formed. Diethyl ether (200 ml) was added and the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate. The filtrate was dried with additional magnesium sulfate, filtered and concentrated to give a colorless oil. The crude material was used directly in the next reaction. to warm to 23° C. stir for 14 hours before being re-chilled to 0° C a solid formed the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate The filtrate was dried with additional magnesium sulfate filtered concentrated to give a colorless oil

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 2.0 L RBF containing 1-(2,2-dimethoxyethyl)cyclopropanol (17.400 g, 119 mmol) was added DCM (550 ml) and the mixture was allowed to stir at 0° C. for 15 min. 2,4,6-Colliding (63.1 ml, 476 mmol) was added and the reaction was allowed to chill for 5 min before the addition of tert-butyldimethylsilyl triflate (27.3 ml, 119 mmol) over 10 min. The reaction was allowed to stir for 20 min and then analyzed by tlc which showed that all of the tertiary alcohol had been protected as its TBS ether. So, triethylsilyl trifluoromethanesulfonate (53.8 ml, 238 mmol) was added via syringe over 10 min. After 20 min, tic showed all of the material was converted to a baseline Rf material (mixed acetal) and then water (300 mL) was added and the reaction was allowed to stir overnight. The layers were separated. The DCM was washed with dilute HCl to remove the 2,4,6-collidine. The aq. layer was back extracted with DCM. The combined organics were washed with sodium bicarbonate, brine, dried with sodium sulfate and filtered though a plug of silica gel. Desired fractions were collected to give the product. 2,4,6-Colliding (63.1 ml, 476 mmol) was added to stir for 20 min After 20 min to stir overnight The layers were separated The DCM was washed with dilute HCl to remove the 2,4,6-collidine The aq. layer was back extracted with DCM The combined organics were washed with sodium bicarbonate, brine dried with sodium sulfate filtered though a plug of silica gel Desired fractions were collected to give the product

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 1.0 L RBF containing methyl 3,3-dimethoxypropanoate (17.6500 g, 119 mmol) was added THF (150 ml) and diethyl ether (150 ml), and the mixture was allowed to stir at 0° C. for 15 min. At this time, tetra-isopropoxy titanium (6.98 ml, 23.8 mmol) was added in one portion before the dropwise addition of ethylmagnesium bromide (99.3 ml, 298 mmol) via syringe. The reaction was allowed to warm to 23° C. and stir for 14 hours before being re-chilled to 0° C. After 5 min at this temp, water (15 ml) was added and a solid formed. Diethyl ether (200 ml) was added and the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate. The filtrate was dried with additional magnesium sulfate, filtered and concentrated to give a colorless oil. The crude material was used directly in the next reaction. to warm to 23° C. stir for 14 hours before being re-chilled to 0° C a solid formed the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate The filtrate was dried with additional magnesium sulfate filtered concentrated to give a colorless oil

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 2.0 L RBF containing 1-(2,2-dimethoxyethyl)cyclopropanol (17.400 g, 119 mmol) was added DCM (550 ml) and the mixture was allowed to stir at 0° C. for 15 min. 2,4,6-Colliding (63.1 ml, 476 mmol) was added and the reaction was allowed to chill for 5 min before the addition of tert-butyldimethylsilyl triflate (27.3 ml, 119 mmol) over 10 min. The reaction was allowed to stir for 20 min and then analyzed by tlc which showed that all of the tertiary alcohol had been protected as its TBS ether. So, triethylsilyl trifluoromethanesulfonate (53.8 ml, 238 mmol) was added via syringe over 10 min. After 20 min, tic showed all of the material was converted to a baseline Rf material (mixed acetal) and then water (300 mL) was added and the reaction was allowed to stir overnight. The layers were separated. The DCM was washed with dilute HCl to remove the 2,4,6-collidine. The aq. layer was back extracted with DCM. The combined organics were washed with sodium bicarbonate, brine, dried with sodium sulfate and filtered though a plug of silica gel. Desired fractions were collected to give the product. 2,4,6-Colliding (63.1 ml, 476 mmol) was added to stir for 20 min After 20 min to stir overnight The layers were separated The DCM was washed with dilute HCl to remove the 2,4,6-collidine The aq. layer was back extracted with DCM The combined organics were washed with sodium bicarbonate, brine dried with sodium sulfate filtered though a plug of silica gel Desired fractions were collected to give the product

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 1.0 L RBF containing methyl 3,3-dimethoxypropanoate (17.6500 g, 119 mmol) was added THF (150 ml) and diethyl ether (150 ml), and the mixture was allowed to stir at 0° C. for 15 min. At this time, tetra-isopropoxy titanium (6.98 ml, 23.8 mmol) was added in one portion before the dropwise addition of ethylmagnesium bromide (99.3 ml, 298 mmol) via syringe. The reaction was allowed to warm to 23° C. and stir for 14 hours before being re-chilled to 0° C. After 5 min at this temp, water (15 ml) was added and a solid formed. Diethyl ether (200 ml) was added and the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate. The filtrate was dried with additional magnesium sulfate, filtered and concentrated to give a colorless oil. The crude material was used directly in the next reaction. to warm to 23° C. stir for 14 hours before being re-chilled to 0° C a solid formed the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate The filtrate was dried with additional magnesium sulfate filtered concentrated to give a colorless oil

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 2.0 L RBF containing 1-(2,2-dimethoxyethyl)cyclopropanol (17.400 g, 119 mmol) was added DCM (550 ml) and the mixture was allowed to stir at 0° C. for 15 min. 2,4,6-Collidine (63.1 ml, 476 mmol) was added and the reaction was allowed to chill for 5 min before the addition of tert-butyldimethylsilyl triflate (27.3 ml, 119 mmol) over 10 min. The reaction was allowed to stir for 20 min and then analyzed by tlc which showed that all of the tertiary alcohol had been protected as its TBS ether. So, triethylsilyl trifluoromethanesulfonate (53.8 ml, 238 mmol) was added via syringe over 10 min. After 20 min, tlc showed all of the material was converted to a baseline Rf material (mixed acetal) and then water (300 mL) was added and the reaction was allowed to stir overnight. The layers were separated. The DCM was washed with dilute HCl to remove the 2,4,6-collidine. The aq. layer was back extracted with DCM. The combined organics were washed with sodium bicarbonate, brine, dried with sodium sulfate and filtered though a plug of silica gel. Desired fractions were collected to give the product. to stir for 20 min After 20 min to stir overnight The layers were separated The DCM was washed with dilute HCl to remove the 2,4,6-collidine The aq. layer was back extracted with DCM The combined organics were washed with sodium bicarbonate, brine dried with sodium sulfate filtered though a plug of silica gel Desired fractions were collected to give the product

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 1.0 L RBF containing methyl 3,3-dimethoxypropanoate (17.6500 g, 119 mmol) was added THF (150 ml) and diethyl ether (150 ml), and the mixture was allowed to stir at 0° C. for 15 min. At this time, tetra-isopropoxy titanium (6.98 ml, 23.8 mmol) was added in one portion before the dropwise addition of ethylmagnesium bromide (99.3 ml, 298 mmol) via syringe. The reaction was allowed to warm to 23° C. and stir for 14 hours before being re-chilled to 0° C. After 5 min at this temp, water (15 ml) was added and a solid formed. Diethyl ether (200 ml) was added and the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate. The filtrate was dried with additional magnesium sulfate, filtered and concentrated to give a colorless oil. The crude material was used directly in the next reaction. to warm to 23° C. stir for 14 hours before being re-chilled to 0° C a solid formed the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate The filtrate was dried with additional magnesium sulfate filtered concentrated to give a colorless oil

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 2.0 L RBF containing 1-(2,2-dimethoxyethyl)cyclopropanol (17.400 g, 119 mmol) was added DCM (550 ml) and the mixture was allowed to stir at 0° C. for 15 min. 2,4,6-Colliding (63.1 ml, 476 mmol) was added and the reaction was allowed to chill for 5 min before the addition of tert-butyldimethylsilyl triflate (27.3 ml, 119 mmol) over 10 min. The reaction was allowed to stir for 20 min and then analyzed by tlc which showed that all of the tertiary alcohol had been protected as its TBS ether. So, triethylsilyl trifluoromethanesulfonate (53.8 ml, 238 mmol) was added via syringe over 10 min. After 20 min, tic showed all of the material was converted to a baseline Rf material (mixed acetal) and then water (300 mL) was added and the reaction was allowed to stir overnight. The layers were separated. The DCM was washed with dilute HCl to remove the 2,4,6-collidine. The aq. layer was back extracted with DCM. The combined organics were washed with sodium bicarbonate, brine, dried with sodium sulfate and filtered though a plug of silica gel. Desired fractions were collected to give the product. 2,4,6-Colliding (63.1 ml, 476 mmol) was added to stir for 20 min After 20 min to stir overnight The layers were separated The DCM was washed with dilute HCl to remove the 2,4,6-collidine The aq. layer was back extracted with DCM The combined organics were washed with sodium bicarbonate, brine dried with sodium sulfate filtered though a plug of silica gel Desired fractions were collected to give the product

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 1.0 L RBF containing methyl 3,3-dimethoxypropanoate (17.6500 g, 119 mmol) was added THF (150 ml) and diethyl ether (150 ml), and the mixture was allowed to stir at 0° C. for 15 min. At this time, tetra-isopropoxy titanium (6.98 ml, 23.8 mmol) was added in one portion before the dropwise addition of ethylmagnesium bromide (99.3 ml, 298 mmol) via syringe. The reaction was allowed to warm to 23° C. and stir for 14 hours before being re-chilled to 0° C. After 5 min at this temp, water (15 ml) was added and a solid formed. Diethyl ether (200 ml) was added and the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate. The filtrate was dried with additional magnesium sulfate, filtered and concentrated to give a colorless oil. The crude material was used directly in the next reaction. to warm to 23° C. stir for 14 hours before being re-chilled to 0° C a solid formed the quenched reaction was stirred for 10 min before filtering through a plug of magnesium sulfate The filtrate was dried with additional magnesium sulfate filtered concentrated to give a colorless oil