8-溴辛氧基甲基苯

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To freshly activated Mg turnings (24.08 g, 1.003 mol) was added 200 mL anhydrous THF was added followed by the addition of pinch of iodine into the mixture under inert atmosphere. After initiation of the Grignard formation a solution of Compound 3 (150 g, 0.5016 mol) in 1 L of dry THF was added slowly controlling the exothermic reaction. After complete addition reaction was refluxed for 1 h and then cooled to room temperature. (60.24 g, 1.0033 mol) methyl formate was then added slowly and reaction was continued for 2 h. After completion, the reaction was quenched by slow addition of 10% HCl followed by water (1 L) and extracted with Ethyl Acetate (3×1 L). Organic layer was taken in 5 lit beaker, diluted with 500 mL of methanol and cooled to 0° C. To this solution excess of NaBH4 (˜5 eq) was added in portions to ensure the hydrolysis of formate ester which was not cleaved by addition of HCl. Resulting solution was stirred for an hour and then volatilites were stripped off under vacuum. Residue was taken in water (1 L) and acidified by 10% HCl solution (PH 4). Product was then extracted out with ethyl acetate (3×1 L). Organic phase was then dried and concentrated on rotary evaporator to get the desired compound 4 (57 g, 24%) as solid. H1 NMR (400 MHz, CDCl3): δ=7.35-7.32 (m, 8H), 7.29-7.24 (m, 2H), 4.49 (s, 4H), 3.56 (m, 1H), 3.46-3.43 (m, 4H), 1.63-1.56 (m, 4H), 1.44-1.34 (m, 28H). C13 NMR (100 MHz, CDCl3): δ=138.56, 128.21, 127.49, 127.34, 72.72, 71.76, 70.37, 37.37, 29.64, 29.56, 29.47, 29.33, 26.07, 25.54. was added the exothermic reaction After complete addition reaction was refluxed for 1 h reaction After completion, the reaction was quenched by slow addition of 10% HCl extracted with Ethyl Acetate (3×1 L) diluted with 500 mL of methanol cooled to 0° C Product was then extracted out with ethyl acetate (3×1 L) Organic phase was then dried concentrated on rotary evaporator

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Compound 2 (133 g, 0.5635 mol) was dissolved in 1.5 L of DCM, CBr4 (280.35 g, 0.8456 mol) was added into this stirring solution and reaction mixture was cooled to 0° C. under inert atmosphere. PPh3 (251.03 g, 0.957 μmol) was then added in portions keeping the temperature below 20° C. and after complete addition reaction was stirred for 3 h at room temperature and monitored by TLC. After completion of reaction, solid (PPh3O) precipitated out from the reaction mixture was filtered off and filtrate was diluted with crushed ice (˜1.5 kg) and extracted with DCM (3×750 mL). Organic layer was separated, dried over an Na2SO4 and distilled under vacuum. Resulting crude compound was chromatographed on 60-120 mesh silica gel column using 0-5% ethyl acetate in hexanes as eluting system to give compound (150 g, 89%) as pale yellow liquid. H1 NMR (400 MHz, CDCl3): δ=7.33-7.25 (m, 5H), 4.49 (s, 2H), 3.47-3.41 (m, 2H), 3.41-3.37 (m, 2H), 1.86-1.80 (m, 4H), 1.62-1.56 (m, 2H), 1.42-1.29 (m, 8H). the temperature below 20° C. after complete addition reaction After completion of reaction, solid (PPh3O) precipitated out from the reaction mixture was filtered off filtrate was diluted with crushed ice (˜1.5 kg) extracted with DCM (3×750 mL) Organic layer was separated dried over an Na2SO4 distilled under vacuum Resulting crude compound was chromatographed on 60-120 mesh silica gel column as eluting system

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To freshly activated Mg turnings (24.08 g, 1.003 mol) was added 200 mL anhydrous THF, followed by the addition of pinch of iodine into the mixture under inert atmosphere. After initiation of the Grignard formation a solution of Compound 241 (150 g, 0.5016 mol) in 1 L of dry THF was added slowly controlling the exothermic reaction. After complete addition, the reaction was heated to reflux for 1 hour, then cooled to room temperature. Methyl formate (60.24 g, 1.0033 mol) was then added slowly and reaction was continued for 2 hours. After completion, the reaction was quenched by slow addition of 10% HCl followed by water (1 L) and extracted with ethyl acetate (3×1 L). The organic layer was taken in 5 liter beaker, diluted with 500 mL of methanol and cooled to 0° C. To this solution excess of NaBH4 (˜5 eq) was added in portions to ensure the hydrolysis of formate ester which was not cleaved by addition of HCl. The resulting solution was stirred for an hour and then volatilites were removed under vacuum. The residue was taken in water (1 L) and acidified by 10% HCl solution (PH 4). The product was then extracted with ethyl acetate (3×1 L). The organic phase was then dried and concentrated on rotary evaporator to afford compound 242 (57 g, 24%) as solid. 1H NMR (400 MHz, CDCl3): δ=7.35-7.32 (m, 8H), 7.29-7.24 (m, 2H), 4.49 (s, 4H), 3.56 (m, 1H), 3.46-3.43 (m, 4H), 1.63-1.56 (m, 4H), 1.44-1.34 (m, 28H). C13 NMR (100 MHz, CDCl3): δ=138.56, 128.21, 127.49, 127.34, 72.72, 71.76, 70.37, 37.37, 29.64, 29.56, 29.47, 29.33, 26.07, 25.54. the exothermic reaction After complete addition the reaction was heated to reflux for 1 hour reaction After completion, the reaction was quenched by slow addition of 10% HCl extracted with ethyl acetate (3×1 L) diluted with 500 mL of methanol cooled to 0° C volatilites were removed under vacuum The product was then extracted with ethyl acetate (3×1 L) The organic phase was then dried concentrated on rotary evaporator

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Compound 240 (133 g, 0.5635 mol) was dissolved in 1.5 L of DCM, CBr4 (280.35 g, 0.8456 mol) was added to this stirring solution and the reaction mixture was cooled to 0° C. under an inert atmosphere. PPh3 (251.03 g, 0.9571 mol) was then added in portions maintaining the temperature below 20° C. and after complete addition, the reaction mixture was stirred for 3 hours at room temperature. After completion of reaction, solid (PPh3O) precipitated out from the reaction mixture was isolated by filtration and the filtrate was diluted with crushed ice (˜1.5 kg) and extracted with DCM (3×750 mL). The organic layer was separated, dried over anhydrous Na2SO4 and distilled under vacuum. The resulting crude compound was chromatographed on 60-120 mesh silica gel column using 0-5% ethyl acetate in hexanes as eluting system to afford compound 241 (150 g, 89%) as pale yellow liquid. 1H NMR (400 MHz, CDCl3): δ=7.33-7.25 (m, 5H), 4.49 (s, 2H), 3.47-3.41 (m, 2H), 3.41-3.37 (m, 2H), 1.86-1.80 (m, 4H), 1.62-1.56 (m, 2H), 1.42-1.29 (m, 8H). maintaining the temperature below 20° C. after complete addition After completion of reaction, solid (PPh3O) precipitated out from the reaction mixture was isolated by filtration extracted with DCM (3×750 mL) The organic layer was separated dried over anhydrous Na2SO4 distilled under vacuum The resulting crude compound was chromatographed on 60-120 mesh silica gel column as eluting system

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To freshly activated Mg turnings (24.08 g, 1.003 mol) was added 200 mL anhydrous THF, followed by the addition of pinch of iodine into the mixture under inert atmosphere. After initiation of the Grignard formation a solution of Compound 3 (150 g, 0.5016 mol) in 1 L of dry THF was added slowly controlling the exothermic reaction. After complete addition, the reaction was heated to reflux for 1 hour, then cooled to room temperature. Methyl formate (60.24 g, 1.0033 mol) was then added slowly and reaction was continued for 2 hours. After completion, the reaction was quenched by slow addition of 10% HCl followed by water (1 L) and extracted with ethyl acetate (3×1 L). The organic layer was taken in 5 liter beaker, diluted with 500 mL of methanol and cooled to 0° C. To this solution excess of NaBH4 (˜5 eq) was added in portions to ensure the hydrolysis of formate ester which was not cleaved by addition of HCl. The resulting solution was stirred for an hour and then volatilites were removed under vacuum. The residue was taken in water (1 L) and acidified by 10% HCl solution (PH 4). The product was then extracted with ethyl acetate (3×1 L). The organic phase was then dried and concentrated on rotary evaporator to afford compound 4 (57 g, 24%) as solid. 1H NMR (400 MHz, CDCl3): δ=7.35-7.32 (m, 8H), 7.29-7.24 (m, 2H), 4.49 (s, 4H), 3.56 (m, 1H), 3.46-3.43 (m, 4H), 1.63-1.56 (m, 4H), 1.44-1.34 (m, 28H). C13 NMR (100 MHz, CDCl3): δ=138.56, 128.21, 127.49, 127.34, 72.72, 71.76, 70.37, 37.37, 29.64, 29.56, 29.47, 29.33, 26.07, 25.54. the exothermic reaction After complete addition the reaction was heated to reflux for 1 hour reaction After completion, the reaction was quenched by slow addition of 10% HCl extracted with ethyl acetate (3×1 L) diluted with 500 mL of methanol cooled to 0° C volatilites were removed under vacuum The product was then extracted with ethyl acetate (3×1 L) The organic phase was then dried concentrated on rotary evaporator

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Compound 2 (133 g, 0.5635 mol) was dissolved in 1.5 L of DCM, CBr4 (280.35 g, 0.8456 mol) was added to this stirring solution and the reaction mixture was cooled to 0° C. under an inert atmosphere. PPh3 (251.03 g, 0.9571 mol) was then added in portions maintaining the temperature below 20° C. and after complete addition, the reaction mixture was stirred for 3 hours at room temperature. After completion of reaction, solid (PPh3O) precipitated out from the reaction mixture was isolated by filtration and the filtrate was diluted with crushed ice (˜1.5 kg) and extracted with DCM (3×750 mL). The organic layer was separated, dried over anhydrous Na2SO4 and distilled under vacuum. The resulting crude compound was chromatographed on 60-120 mesh silica gel column using 0-5% ethyl acetate in hexanes as eluting system to afford compound 3 (150 g, 89%) as pale yellow liquid. 1H NMR (400 MHz, CDCl3): δ=7.33-7.25 (m, 5H), 4.49 (s, 2H), 3.47-3.41 (m, 2H), 3.41-3.37 (m, 2H), 1.86-1.80 (m, 4H), 1.62-1.56 (m, 2H), 1.42-1.29 (m, 8H). maintaining the temperature below 20° C. after complete addition After completion of reaction, solid (PPh3O) precipitated out from the reaction mixture was isolated by filtration extracted with DCM (3×750 mL) The organic layer was separated dried over anhydrous Na2SO4 distilled under vacuum The resulting crude compound was chromatographed on 60-120 mesh silica gel column as eluting system