O-[(2S)-2-[tert-butyl(dimethyl)silyl]oxypropyl]hydroxylamine

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)—O-(2-(tert-butyldimethylsilyloxy)propyl)hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)-O-(2-(tert-butyldimethylsilyloxy)propyl) hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)—O-(2-(tert-butyldimethylsilyloxy)propyl)hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)—O-(2-(tert-butyldimethylsilyloxy)propyl)hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)-O-(2-(tert-butyldimethylsilyloxy)propyl) hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)—O-(2-(tert-butyldimethylsilyloxy)propyl)hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)—O-(2-(tert-butyldimethylsilyloxy)propyl)hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-(2-Fluoro-4-iodo-phenylamino)-1-methyl-1H-pyrrolo[3,2-c]pyridine-2-carboxylic acid sodium salt (0.20 g, 0.46 mmol), O—[(S)-2-(tert-butyldimethylsilanyloxy)-propyl]-hydroxylamine (95 mg, 0.46 mmol), HOBT (69 mg, 0.51 mmol), EDCI (97 mg, 0.51 mmol) and DIPEA (0.08 ml, 0.46 mmol) were suspended in a mixture of THF (3 ml) and DMF (1 ml). The reaction was stirred at room temperature for 16 hours. The reaction mixture was concentrated in vacuo and the residue dissolved in ethyl acetate (20 ml) and washed with aqueous saturated sodium bicarbonate solution (20 ml). The aqueous layer was isolated and extracted with ethyl acetate (2×10 ml) and the combined organic layers dried, washed with brine and dried over magnesium sulfate before concentrating in vacuo. The crude residue was purified by flash chromatography (SiO2, gradient 1-3% methanol in dichloromethane) to yield the title compound as an off-white solid (171 mg, 62%). LCMS (method B): RT=3.00 min, M+H+=599. The reaction mixture was concentrated in vacuo the residue dissolved in ethyl acetate (20 ml) washed with aqueous saturated sodium bicarbonate solution (20 ml) The aqueous layer was isolated extracted with ethyl acetate (2×10 ml) the combined organic layers dried washed with brine dried over magnesium sulfate before concentrating in vacuo The crude residue was purified by flash chromatography (SiO2, gradient 1-3% methanol in dichloromethane)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-(2-Fluoro-4-iodo-phenylamino)-1-methyl-1H-pyrrolo[3,2-c]pyridine-2-carboxylic acid sodium salt (0.20 g, 0.46 mmol), O—[(S)-2-(tert-butyldimethylsilanyloxy)-propyl]-hydroxylamine (95 mg, 0.46 mmol), HOBT (69 mg, 0.51 mmol), EDCI (97 mg, 0.51 mmol) and DIPEA (0.08 ml, 0.46 mmol) were suspended in a mixture of THF (3 ml) and DMF (1 ml). The reaction was stirred at room temperature for 16 hours. The reaction mixture was concentrated in vacuo and the residue dissolved in ethyl acetate (20 ml) and washed with aqueous saturated sodium bicarbonate solution (20 ml). The aqueous layer was isolated and extracted with ethyl acetate (2×10 ml) and the combined organic layers dried, washed with brine and dried over magnesium sulfate before concentrating in vacuo. The crude residue was purified by flash chromatography (SiO2, gradient 1-3% methanol in dichloromethane) to yield the title compound as an off-white solid (171 mg, 62%). LCMS (method B): RT=3.00 min, M+H+=599. The reaction mixture was concentrated in vacuo the residue dissolved in ethyl acetate (20 ml) washed with aqueous saturated sodium bicarbonate solution (20 ml) The aqueous layer was isolated extracted with ethyl acetate (2×10 ml) the combined organic layers dried washed with brine dried over magnesium sulfate before concentrating in vacuo The crude residue was purified by flash chromatography (SiO2, gradient 1-3% methanol in dichloromethane)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3-(2-Fluoro-4-iodo-phenylamino)-1-methyl-1H-pyrrolo[3,2-c]pyridine-2-carboxylic acid sodium salt (0.20 g, 0.46 mmol), O—[(S)-2-(tert-butyldimethylsilanyloxy)-propyl]-hydroxylamine (95 mg, 0.46 mmol), HOBT (69 mg, 0.51 mmol), EDCI (97 mg, 0.51 mmol) and DIPEA (0.08 ml, 0.46 mmol) were suspended in a mixture of THF (3 ml) and DMF (1 ml). The reaction was stirred at room temperature for 16 hours. The reaction mixture was concentrated in vacuo and the residue dissolved in ethyl acetate (20 ml) and washed with aqueous saturated sodium bicarbonate solution (20 ml). The aqueous layer was isolated and extracted with ethyl acetate (2×10 ml) and the combined organic layers dried, washed with brine and dried over magnesium sulfate before concentrating in vacuo. The crude residue was purified by flash chromatography (SiO2, gradient 1-3% methanol in dichloromethane) to yield the title compound as an off-white solid (171 mg, 62%). LCMS (method B): RT=3.00 min, M+H+=599. The reaction mixture was concentrated in vacuo the residue dissolved in ethyl acetate (20 ml) washed with aqueous saturated sodium bicarbonate solution (20 ml) The aqueous layer was isolated extracted with ethyl acetate (2×10 ml) the combined organic layers dried washed with brine dried over magnesium sulfate before concentrating in vacuo The crude residue was purified by flash chromatography (SiO2, gradient 1-3% methanol in dichloromethane)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of methyl 2-(4-bromo-2-fluorophenylamino)-1-methyl-6-oxo-1,6-dihydropyridine-3-carboxylate (0.050 g, 0.14 mmol) and (S)—O-(2-(tert-butyldimethylsilyloxy)propyl)hydroxylamine (0.072 g, 0.35 mmol) in THF (1.50 mL) at 0° C. was slowly added lithium bis(trimethylsilyl)amide (0.70 ml, 0.70 mmol). After addition, the reaction mixture was stirred for 1 hour at room temperature and then quenched by with saturated NaHCO3. The reaction mixture was partitioned between EtOAc and sat NaCl. The layers were separated and the aqueous layer was back-extracted with EtOAc (1×). The combined organic layers were dried (Na2SO4), filtered and concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step. at 0° C. After addition quenched by with saturated NaHCO3 The reaction mixture was partitioned between EtOAc The layers were separated the aqueous layer was back-extracted with EtOAc (1×) The combined organic layers were dried (Na2SO4) filtered concentrated under reduced pressure to yield a crude brown solid that was used without further purification in the next step

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a cold solution of crude 2-[(S)-2-(tert-butyl-dimethyl-silanyloxy)-propoxy]-isoindole-1,3-dione (0.28 mol) in DCM (200 ml) at 0° C. was added methyl hydrazine (14.74 mol, 0.28 mol). The reaction mixture was stirred at 0° C. for 30 minutes then filtered and the filtrate concentrated in vacuo. The resultant residue was subjected to distillation (b.p. 108-112° C. at 2-10 mbar) to yield the title compound as a colourless oil. (42.63 g, 74% from ethyl lactate). 1H NMR (CDCl3, 400 MHz) 5.36 (2H, s), 3.95 (1H, m), 3.55-3.41 (2H, m), 1.04 (3H, d, J=6.28 Hz), 0.81 (9H, s), 0.02 (6H, m). then filtered the filtrate concentrated in vacuo The resultant residue was subjected to distillation (b.p. 108-112° C. at 2-10 mbar)