2-氨基苯硼酸盐酸盐

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A modification of the method described in Example 1283 was used to couple tert-butyl (4-bromo-3-cyano-1-methyl-1H-pyrazol-5-yl)methylcarbamate (1.43 g, 4.53 mmol) with 2-aminophenylboronic acid hydrochloride (1.57 g, 9.06 mmol). The reaction was completed in 70 minutes. tert-Butyl methyl ether was used instead of chloroform in the work-up procedure. The coupling product was purified by IFC (silica cartridge, eluting with 40% to 60% ethyl acetate in hexane). The reaction with hydrogen chloride was heated at reflux for 24 hours. Diethyl ether (50 mL) was added after the reaction cooled to room temperature. A precipitate was present and was isolated by filtration and dried on the vacuum filter funnel for three hours to provide 1.13 g of 1-(aminomethyl)-2-methyl-2H-pyrazolo[3,4-c]quinolin-4-amine hydrochloride as a white solid, mp>250° C. The coupling product was purified by IFC (silica cartridge, eluting with 40% to 60% ethyl acetate in hexane) The reaction with hydrogen chloride was heated at reflux for 24 hours was isolated by filtration dried on the vacuum filter funnel for three hours

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A modification of the method described in Example 1283 was used to couple tert-butyl (4-bromo-3-cyano-1-methyl-1H-pyrazol-5-yl)methylcarbamate (1.43 g, 4.53 mmol) with 2-aminophenylboronic acid hydrochloride (1.57 g, 9.06 mmol). The reaction was completed in 70 minutes. tert-Butyl methyl ether was used instead of chloroform in the work-up procedure. The coupling product was purified by IFC (silica cartridge, eluting with 40% to 60% ethyl acetate in hexane). The reaction with hydrogen chloride was heated at reflux for 24 hours. Diethyl ether (50 mL) was added after the reaction cooled to room temperature. A precipitate was present and was isolated by filtration and dried on the vacuum filter funnel for three hours to provide 1.13 g of 1-(aminomethyl)-2-methyl-2H-pyrazolo[3,4-c]quinolin-4-amine hydrochloride as a white solid, mp>250° C. The coupling product was purified by IFC (silica cartridge, eluting with 40% to 60% ethyl acetate in hexane) The reaction with hydrogen chloride was heated at reflux for 24 hours was isolated by filtration dried on the vacuum filter funnel for three hours

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A modification of the method described in Part B of Example 1283 was used to couple 4-bromo-5-(2-cyano-2-methylpropyl)-1-(2-methoxyethyl)-1H-pyrazole-3-carbonitrile (1.56 g, 5.00 mmol) with 2-aminophenylboronic acid hydrochloride (1.73 g, 10.0 mmol). The reaction was completed in one hour. The coupling product was purified by IFC (silica cartridge, eluting with 50% to 90% ethyl acetate in hexane). The reaction with hydrogen chloride was heated at reflux for two hours and allowed to cool to room temperature overnight. 3-[4-Amino-2-(2-methoxyethyl)-2H-pyrazolo[3,4-c]quinolin-1-yl]-2,2-dimethylpropanenitrile (676 mg) was obtained as white crystals, mp 206-208° C. The coupling product was purified by IFC (silica cartridge, eluting with 50% to 90% ethyl acetate in hexane) The reaction with hydrogen chloride was heated at reflux for two hours

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A modification of the method described in Example 1283 was used to couple 4-bromo-5-(2-cyano-2-methylpropyl)-1-propyl-1H-pyrazole-3-carbonitrile (1.48 g, 5.00 mmol) with 2-aminophenylboronic acid hydrochloride (1.73 g, 10.0 mmol). The reaction was completed in one hour. The coupling product was purified by IFC (silica cartridge, eluting with 40% to 60% ethyl acetate in hexane). The reaction with hydrogen chloride was heated at reflux for a total of about seven hours. 3-(4-Amino-2-propyl-2H-pyrazolo[3,4-c]quinolin-1-yl)-2,2-dimethylpropanenitrile (840 mg) was obtained as a white solid, mp 248-250° C. The coupling product was purified by IFC (silica cartridge, eluting with 40% to 60% ethyl acetate in hexane) The reaction with hydrogen chloride was heated at reflux for a total of about seven hours

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A modification of the method described in Part H of Example 1255 was used to treat 1-butyl-4-bromo-5-(2-hydroxy-2-methylpropyl)-1H-pyrazole-3-carbonitrile (2.7 g, 9.2 mmol). Two equivalents of 2-aminophenylboronic acid hydrochloride (3.2 g, 18.4 mmol) and 2 mol % dichlorobis(triphenylphosphine)palladium(II) (0.126 g, 0.18 mmol) were added at the beginning of the reaction, and the reaction was heated at reflux for five hours. The crude product was purified by chromatography on a HORIZON HPFC system (40+M cartridge, eluting with 0 to 50% ethyl acetate in hexanes to provide 4-(2-aminophenyl)-1-butyl-5-(2-hydroxy-2-methylpropyl)-1H-pyrazole-3-carbonitrile. the reaction was heated at reflux for five hours The crude product was purified by chromatography on a HORIZON HPFC system (40+M cartridge eluting with 0 to 50% ethyl acetate in hexanes

反应条件: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-Aminophenylboronic acid hydrochloride (16.2 g, 93.5 mmol), potassium carbonate (42.5 g, 308 mmol), DME (333 mL), water (166 mL), and 4-bromo-5-(4-chlorobutyl)-1-(2-methoxyethyl)-1H-pyrazole-3-carbonitrile (30 g, 93.5 mmol) were combined in a flask, which was then evacuated three times and filled with nitrogen. Dichlorobis(triphenylphosphine)palladium(II) (0.65 g, 0.94 mmol) was then added, and the reaction was heated at 110° C. for one hour. An analysis by HPLC indicated the presence of starting material, and additional 2-aminophenylboronic acid hydrochloride (16.2 g, 93.5 mmol) and dichlorobis(triphenylphosphine)palladium(II) (0.65 g, 0.94 mmol) were added. The reaction was then heated at reflux overnight and allowed to cool to ambient temperature. Water (30 mL) was added, and the mixture was extracted with ethyl acetate. The combined extracts were dried over sodium sulfate, filtered through a layer of CELITE filter agent, and concentrated under reduced pressure. The crude product was purified by column chromatography on silica gel (eluting sequentially with 25% ethyl acetate in hexanes and 75% ethyl acetate in hexanes) to provide 18 g of 4-(2-aminophenyl)-5-(4-chlorobutyl)-1-(2-methoxyethyl)-1H-pyrazole-3-carbonitrile as a maroon oil. which was then evacuated three times filled with nitrogen were added The reaction was then heated at reflux overnight to cool to ambient temperature the mixture was extracted with ethyl acetate The combined extracts were dried over sodium sulfate filtered through a layer of CELITE filter agent concentrated under reduced pressure The crude product was purified by column chromatography on silica gel ( eluting sequentially with 25% ethyl acetate in hexanes and 75% ethyl acetate in hexanes)

反应条件: temp:115.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The method described in Part F of Example 46 was used to couple 4-bromo-5-(4-chlorobutyl)-1-methyl-1H-pyrazole-3-carbonitrile (16.0 g, 60.0 mmol) and 2-aminophenylboronic acid hydrochloride (20.8 g, 0.120 mol). After the mixture was heated at 115° C. for 24 hours, it was cooled to ambient temperature and filtered through a plug of silica gel (eluting with 3:2 chloroform/methanol). The filtrate was concentrated under reduced pressure and dissolved in ethanol (300 mL). Hydrogen chloride (45 mL of a 4 M solution in ethanol) was added to the solution, and the reaction was heated at reflux for two hours and then cooled to ambient temperature. A precipitate formed and was isolated by filtration and washed with ethanol to provide 1-(4-chlorobutyl)-2-methyl-2H-pyrazolo[3,4-c]quinolin-4-amine hydrochloride. The filtrate was concentrated under reduced pressure and the resulting solid was dissolved in dichloromethane and water. The pH of the solution was raised to 14 using 50% aqueous NaOH while keeping the temperature at 0° C. by adding ice. The layers were separated, the aqueous layer was extracted with additional dichloromethane, the organic layers were combined, dried over Na2SO4, filtered and concentrated to a dark yellow oily solid. The residue was purified by chromatography using a HORIZON HPFC system (40+M cartridge, eluting with 0-30% CMA in chloroform) followed by recrystallization from acetonitrile to provide 1-(4-chlorobutyl)-2-methyl-2H-pyrazolo[3,4-c]quinolin-4-amine. This solid was purified as light tan crystals, mp 188-189° C. it was cooled to ambient temperature filtered through a plug of silica gel (eluting with 3:2 chloroform/methanol) The filtrate was concentrated under reduced pressure dissolved in ethanol (300 mL) Hydrogen chloride (45 mL of a 4 M solution in ethanol) was added to the solution the reaction was heated at reflux for two hours cooled to ambient temperature A precipitate formed was isolated by filtration washed with ethanol

反应条件: temp:115.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The method described in Part F of Example 46 was used to couple 4-bromo-5-(4-chlorobutyl)-1-methyl-1H-pyrazole-3-carbonitrile (16.0 g, 60.0 mmol) and 2-aminophenylboronic acid hydrochloride (20.8 g, 0.120 mol). After the mixture was heated at 115° C. for 24 hours, it was cooled to ambient temperature and filtered through a plug of silica gel (eluting with 3:2 chloroform/methanol). The filtrate was concentrated under reduced pressure and dissolved in ethanol (300 mL). Hydrogen chloride (45 mL of a 4 M solution in ethanol) was added to the solution, and the reaction was heated at reflux for two hours and then cooled to ambient temperature. A precipitate formed and was isolated by filtration and washed with ethanol to provide 1-(4-chlorobutyl)-2-methyl-2H-pyrazolo[3,4-c]quinolin-4-amine hydrochloride. The filtrate was concentrated under reduced pressure and the resulting solid was dissolved in dichloromethane and water. The pH of the solution was raised to 14 using 50% aqueous NaOH while keeping the temperature at 0° C. by adding ice. The layers were separated, the aqueous layer was extracted with additional dichloromethane, the organic layers were combined, dried over Na2SO4, filtered and concentrated to a dark yellow oily solid. The residue was purified by chromatography using a HORIZON HPFC system (40+M cartridge, eluting with 0-30% CMA in chloroform) followed by recrystallization from acetonitrile to provide 1-(4-chlorobutyl)-2-methyl-2H-pyrazolo[3,4-c]quinolin-4-amine. This solid was purified as light tan crystals, mp 188-189° C. it was cooled to ambient temperature filtered through a plug of silica gel (eluting with 3:2 chloroform/methanol) The filtrate was concentrated under reduced pressure dissolved in ethanol (300 mL) Hydrogen chloride (45 mL of a 4 M solution in ethanol) was added to the solution the reaction was heated at reflux for two hours cooled to ambient temperature A precipitate formed was isolated by filtration washed with ethanol

反应条件: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-Aminophenyl boronic acid hydrochloride (9.10 mg, 26.3 mmol) and freshly ground potassium phosphate tribasic (27.8 g, 131 mmol) were added sequentially to a solution of 4-bromo-5-(4-chlorobutyl)-1-propyl-1H-pyrazole-3-carbonitrile (8.00 g, 26.3 mmol), prepared as described in Example 46, in 100 mL of toluene in a pressure tube. Nitrogen was bubbled through the resultant slurry for 15 minutes. Tris(dibenzylideneacetone)dipalladium(0) (1.36 g, 1.31 mmol), bis[(2-diphenylphosphino)phenyl]ether (851 mg, 1.58 mmol), and 4 angstrom molecular sieves were then added to the reaction mixture. The pressure tube was sealed and heated in a 110° C. oil bath. After 24 hours, the reaction mixture was cooled to ambient temperature, diluted with ethyl acetate and filtered through CELITE filter aid. The filtrate was diluted with ethyl acetate and washed with saturated aqueous sodium bicarbonate. The aqueous layer was extracted with additional ethyl acetate and the combined organic layers were washed with brine, dried over magnesium sulfate, filtered, and concentrated to a red oil. Purification via flash column chromatography on silica gel (eluting with 2:1 hexane:ethyl acetate) afforded 7.60 g of 4-(2-aminophenyl)-5-(4-chlorobutyl)-1-propyl-1H-pyrazole-3-carbonitrile as a red oil. prepared Nitrogen was bubbled through the resultant slurry for 15 minutes The pressure tube was sealed the reaction mixture was cooled to ambient temperature filtered through CELITE filter aid The filtrate was diluted with ethyl acetate washed with saturated aqueous sodium bicarbonate The aqueous layer was extracted with additional ethyl acetate the combined organic layers were washed with brine dried over magnesium sulfate filtered concentrated to a red oil Purification via flash column chromatography on silica gel (eluting with 2:1 hexane:ethyl acetate)

反应条件: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-Aminophenyl boronic acid hydrochloride (693 mg, 4.00 mmol) and potassium phosphate tribasic (2.12 g, 10.0 mmol) were added sequentially to a solution of 5-(3-benzenesulfonylpropyl)-4-bromo-1-butyl-1H-pyrazole-3-carbonitrile (550 mg, 1.30 mmol) in 15 mL of toluene in a pressure tube. Nitrogen was bubbled through the resultant slurry for 15 minutes. Tris(dibenzylideneacetone)dipalladium(0) (104 mg, 0.10 mmol), bis[(2-diphenylphosphino)phenyl]ether (65 mg, 0.12 mmol), and 4 angstrom molecular sieves were then added to the reaction mixture. The pressure tube was sealed and heated in a 110° C. oil bath. After 20 hours, the reaction mixture was cooled to ambient temperature, diluted with ethyl acetate and filtered through CELITE filter aid. The filtrate was diluted with ethyl acetate and washed with saturated aqueous sodium bicarbonate. The aqueous layer was extracted with additional ethyl acetate and the combined organic layers were washed with brine, dried over magnesium sulfate, filtered, and concentrated to an orange oil. Purification via flash column chromatography on silica gel (eluting with hexane:ethyl acetate in a gradient from 2:1 to 2:3) afforded 550 mg of 4-(2-aminophenyl)-5-(3-benzenesulfonylpropyl)-1-butyl-1H-pyrazole-3-carbonitrile as a thick pale yellow oil. Nitrogen was bubbled through the resultant slurry for 15 minutes The pressure tube was sealed the reaction mixture was cooled to ambient temperature filtered through CELITE filter aid The filtrate was diluted with ethyl acetate washed with saturated aqueous sodium bicarbonate The aqueous layer was extracted with additional ethyl acetate the combined organic layers were washed with brine dried over magnesium sulfate filtered concentrated to an orange oil Purification via flash column chromatography on silica gel ( eluting with hexane

反应条件: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-Aminophenyl boronic acid hydrochloride (693 mg, 4.00 mmol) and potassium phosphate tribasic (2.12 g, 10.0 mmol) were added sequentially to a solution of 5-(3-benzenesulfonylpropyl)-4-bromo-1-butyl-1H-pyrazole-3-carbonitrile (550 mg, 1.30 mmol) in 15 mL of toluene in a pressure tube. Nitrogen was bubbled through the resultant slurry for 15 minutes. Tris(dibenzylideneacetone)dipalladium(0) (104 mg, 0.10 mmol), bis[(2-diphenylphosphino)phenyl]ether (65 mg, 0.12 mmol), and 4 angstrom molecular sieves were then added to the reaction mixture. The pressure tube was sealed and heated in a 110° C. oil bath. After 20 hours, the reaction mixture was cooled to ambient temperature, diluted with ethyl acetate and filtered through CELITE filter aid. The filtrate was diluted with ethyl acetate and washed with saturated aqueous sodium bicarbonate. The aqueous layer was extracted with additional ethyl acetate and the combined organic layers were washed with brine, dried over magnesium sulfate, filtered, and concentrated to an orange oil. Purification via flash column chromatography on silica gel (eluting with hexane:ethyl acetate in a gradient from 2:1 to 2:3) afforded 550 mg of 4-(2-aminophenyl)-5-(3-benzenesulfonylpropyl)-1-butyl-1H-pyrazole-3-carbonitrile as a thick pale yellow oil. Nitrogen was bubbled through the resultant slurry for 15 minutes The pressure tube was sealed the reaction mixture was cooled to ambient temperature filtered through CELITE filter aid The filtrate was diluted with ethyl acetate washed with saturated aqueous sodium bicarbonate The aqueous layer was extracted with additional ethyl acetate the combined organic layers were washed with brine dried over magnesium sulfate filtered concentrated to an orange oil Purification via flash column chromatography on silica gel ( eluting with hexane

反应条件: temp:110.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 2-Aminophenylboronic acid hydrochloride (9.20 g, 53.0 mmol), potassium phosphate (28.0 g, 133 mmol), tris(dibenzylideneacetone)dipalladium(0) chloroform adduct (685 mg, 0.662 mmol), and bis[(2-diphenylphosphino)phenyl]ether (428 mg, 0.795 mmol) were added to a mixture of 4-bromo-5-(4-chlorobutyl)-1-methyl-1H-pyrazole-3-carbonitrile (7.30 g, 26.5 mmol) and powdered molecular sieves (1 g) in toluene (165 mL). Nitrogen was bubbled through the reaction mixture, and then the reaction was heated at 110° C. for 24 hours. The mixture was filtered through a layer of silica gel (eluting with 3:2 chloroform/methanol). The filtrate was concentrated under reduced pressure and dissolved in ethanol (130 mL). Hydrogen chloride (20 mL of a 4 M solution in ethanol) was added to the solution and the reaction was heated at reflux for two hours and allowed to cool to ambient temperature. The reaction was worked up as described in Part F of Example 19. After purification by chromatography on a HORIZON HPFC system, the solid was stirred in acetonitrile and filtered to provide 1.0 g of 1-(4-chlorobutyl)-2-methyl-2H-pyrazolo[3,4-c]quinolin-4-amine that was used in the next step. The filtrate was concentrated to provide an additional 4.0 g of product. Nitrogen was bubbled through the reaction mixture The mixture was filtered through a layer of silica gel (eluting with 3:2 chloroform/methanol) The filtrate was concentrated under reduced pressure dissolved in ethanol (130 mL) Hydrogen chloride (20 mL of a 4 M solution in ethanol) was added to the solution the reaction was heated at reflux for two hours to cool to ambient temperature After purification by chromatography on a HORIZON HPFC system filtered