己二烯琥珀酸酯

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 11 (240 mg, 0.46 mmol) and HATU (350 mg, 0.92 mmol) were dissolved in DMF (2 mL) and diisopropylethylamine (0.16 mL, 0.92 mmol) was added. The mixture was stirred for 15 min at ambient temperature, and then treated with anhydrous ammonia for 20 min. Stirring was continued overnight. DMF was removed in vacuo, and the residue was diluted with ethyl acetate, washed with water and brine then dried over MgSO4. After evaporation of the solvent, the residue was purified on silica gel (5% methanol/methylene chloride) to afford product 12 as a white solid. 12, a mixture of two diastereomers, was then separated on silica gel, using increasing gradient of 20-50% ethyl acetate-methylene chloride, to give first eluting isomer 12a (43 mg, 18%) and the second eluting isomer 12b (61 mg, 25%) both as a white solids. 12a: MS m/z 521.2 (MH+). 12b: MS m/z 521.2 (MH+). Stirring was continued overnight DMF was removed in vacuo the residue was diluted with ethyl acetate washed with water and brine then dried over MgSO4 After evaporation of the solvent the residue was purified on silica gel (5% methanol/methylene chloride)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 11 (240 mg, 0.46 mmol) and HATU (350 mg, 0.92 mmol) were dissolved in DMF (2 mL) and diisopropylethylamine (0.16 mL, 0.92 mmol) was added. The mixture was stirred for 15 min at ambient temperature, and then treated with anhydrous ammonia for 20 min. Stirring was continued overnight. DMF was removed in vacuo, and the residue was diluted with ethyl acetate, washed with water and brine then dried over MgSO4. After evaporation of the solvent, the residue was purified on silica gel (5% methanol/methylene chloride) to afford product 12 as a white solid. 12, a mixture of two diastereomers, was then separated on silica gel, using increasing gradient of 20-50% ethyl acetate-methylene chloride, to give first eluting isomer 12a (43 mg, 18%) and the second eluting isomer 12b (61 mg, 25%) both as a white solids. 12a: MS m/z 521.2 (MH+). 12b: MS m/z 521.2 (MH+). Stirring was continued overnight DMF was removed in vacuo the residue was diluted with ethyl acetate washed with water and brine then dried over MgSO4 After evaporation of the solvent the residue was purified on silica gel (5% methanol/methylene chloride)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of 10 (380 mg, 1.1 mmol), DIPEA (1 mL, 5.7 mmol), and 11 (0.37 g, 1.2 mmol) in DMF (30 mL) was added HATU (0.43 g, 1.1 mmol) and the solution was allowed to stir for 24 h at room temperature. The solution was diluted with EtOAc (150 mL) and washed with 5% aqueous solution of LiCl (3×100 mL), 1 N HCl (1×100 mL), saturated aqueous NaHCO3 (2×100 mL), brine, dried over anhydrous Na2SO4, filtered, and concentrated to yield an pale yellow oil. This residue was further purified by column chromatography (silica gel, 3:1 Hexanes/EtOAc) to yield 12 (0.31 g, 44%) as a white foam: 1H NMR (300 MHz, CDCl3) δ 7.86-6.91 (m, 9 H), 5.82 (m, 2 H) 5.67 (m, 1 H), 5.09 (m, 4 H), 3.48 (s, 3 H), 2.73-2.28 (m, 5 H), 1.92 (m, 1 H), 1.61 (m, 1 H), 1.42 (s, 9 H), 1.27 (m, 1 H), 0.93 (m, 6 H); ESI MS m/z=626 [C35H42F3N3O4+H]+. washed with 5% aqueous solution of LiCl (3×100 mL), 1 N HCl (1×100 mL), saturated aqueous NaHCO3 (2×100 mL), brine dried over anhydrous Na2SO4 filtered concentrated to yield an pale yellow oil This residue was further purified by column chromatography (silica gel, 3:1 Hexanes/EtOAc)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 11 (240 mg, 0.46 mmol) and HATU (350 mg, 0.92 mmol) were dissolved in DMF (2 mL) and diisopropylethylamine (0.16 mL, 0.92 mmol) was added. The mixture was stirred for 15 min at ambient temperature, and then treated with anhydrous ammonia for 20 min. Stirring was continued overnight. DMF was removed in vacuo, and the residue was diluted with ethyl acetate, washed with water and brine, then dried over MgSO4. After evaporation of the solvent, the residue was purified on silica gel (5% methanol/methylene chloride) to afford product 12 as a white solid. 12, a mixture of two diastereomers, was then separated on silica gel, using increasing gradient of 20-50% ethyl acetate-methylene chloride, to give first eluting isomer 12a (43 mg, 18%.) and the second eluting isomer 12b (61 mg, 25%) both as a white solids. 12a: MS m/z 521.2 (MH+). 12b: MS m/z 521.2 (MH+). Stirring was continued overnight DMF was removed in vacuo the residue was diluted with ethyl acetate washed with water and brine dried over MgSO4 After evaporation of the solvent the residue was purified on silica gel (5% methanol/methylene chloride)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of compound 29 (300 mg, 0.54 mmol) in 50 ml TFA/CH2Cl2 (1:1) was stirred for 2 hr at ambient temperature, then concentrated under vacuum. Two cycles of toluene addition and removal of volatiles gave 250 mg of 30 as a white solid (92%) which was used in the next step without purification. ESI ES+=502.3 (M+1) Step 3: Preparation of 2,2-Diallyl-3-isobutyl-N-4-(1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)-succinamide 31. To a solution of 30 (250 mg, 0.5 mmol) in 30 ml DMF was added HATU (250 mg, 0.66 mmol) and DIEA (400 uL, 2.2 mmol). After stirring for 2 hrs, ammonia gas was bubbled into the solution for 5 minutes using a glass inlet tube. The mixture was then stirred at ambient temperature overnight. Water was added (10 mL) and the solvent was removed under vacuum to give a yellow oil which was taken up in ethyl acetate and water (1:1). The organic layer was washed twice with water and then brine, and dried over Na2SO4. After filtration and concentration, the crude product was purified using silica gel chromatography (CH2Cl2/methanol 10:0.5) to give compound 31 (120 mg) as a white solid (48%). 1H NMR (CDCl3) 0.95-0.88 (dd, 6H), 1.32-1.28 (m, 1H), 1.64-1.50 (m, 1H), 1.90-1.80 (m, 1H), 2.35-2.00 (m, 1H), 2.80-2.54 (m, 4H), 3.48 (s, 3H), 5.38-5.14 (m, 5H), 5.54-5.51 (d, 1H), 5.90-5.78 (m, 2H), 7.65-7.25 (m, 9H), 8.52 (s, 1H). ESI ES+=523.2 (M+Na). Step 4: Preparation of 1-[(1R)-3-methyl-1-[1,3-dihydro-1-methyl-2-oxo-5-phenyl-2H-1,4-benzodiazepin-3-ylcarbamoyl]-butyl]-cyclopent-3-enecarboxylic amide 32. To a solution of 31 (110 mg, 0.22 mmol) in 20 ml of toluene and CH2Cl2 (1:1) at 100 degree was added (bis(tricyclohexylphosphine)-benzylidine ruthenium (IV) dichloride) (24 mg, 0.029 mmol). The mixture was stirred at 100 degree for 4 hrs and another 24 mg Grubbs' catalyst was added. The mixture was then stirred at 100 degree for another 4 hrs. Then the solution was cooled to RT, after which 100 mg of charcoal was added. The mixture was filtered through celite to provide a slightly yellow solution, then concentrated. The residue was purified in silica gel chromatography with CH2Cl2/methanol (10:0.5) to give 48 mg of 32 (46%). 1H NMR (CDCl3) 0.97-0.90 (dd, 6H), 1.30-1.25 (m, 1H), 1.65-1.57 (m, 1H), 2.00-1.85 (m, 1H), 2.40-2.30 (d, 1H), 2.80-2.65 (m, 2H), 3.00-2.80 (d, 1H), 3.40-3.20 (m, 1H), 3.47 (s, 3H), 5.40-5.20 (s, 1H), 5.52-5.49 (d, 1H), 5.80-5.71 (m, 2H), 7.63-7.20 (m, 9H), 7.90 (s, 1H). API AP+ 473.1 (M+1). was used in the next step without purification ESI ES+=502.3 (M+1) Step 3: Preparation of 2,2-Diallyl-3-isobutyl-N-4-(1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)-succinamide 31 ammonia gas was bubbled into the solution for 5 minutes The mixture was then stirred at ambient temperature overnight Water was added (10 mL) the solvent was removed under vacuum to give a yellow oil which The organic layer was washed twice with water brine, and dried over Na2SO4 After filtration and concentration the crude product was purified

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 11 (240 mg, 0.46 mmol) and HATU (350 mg, 0.92 mmol) were dissolved in DMF (2 mL) and diisopropylethylamine (0.16 mL, 0.92 mmol) was added. The mixture was stirred for 15 min at ambient temperature, and then treated with anhydrous ammonia for 20 min. Stirring was continued overnight. DMF was removed in vacuo, and the residue was diluted with ethyl acetate, washed with water and brine then dried over MgSO4. After evaporation of the solvent, the residue was purified on silica gel (5% methanol/methylene chloride) to afford product 12 as a white solid. 12, a mixture of two diastereomers, was then separated on silica gel, using increasing gradient of 20-50% ethyl acetate-methylene chloride, to give first eluting isomer 12a (43 mg, 18%) and the second eluting isomer 12b (61 mg, 25%) both as a white solids. 12a: MS m/z 521.2 (MH+). 12b: MS m/z 521.2 (MH+). Stirring was continued overnight DMF was removed in vacuo the residue was diluted with ethyl acetate washed with water and brine then dried over MgSO4 After evaporation of the solvent the residue was purified on silica gel (5% methanol/methylene chloride)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of 10 (380 mg, 1.1 mmol), DIPEA (1 mL, 5.7 mmol), and 11 (0.37 g, 1.2 mmol) in DMF (30 mL) was added HATU (0.43 g, 1.1 mmol) and the solution was allowed to stir for 24 h at room temperature. The solution was diluted with EtOAc (150 mL) and washed with 5% aqueous solution of LiCl (3×100 mL), 1 N HCl (1×100 mL), saturated aqueous NaHCO3 (2×100 mL), brine, dried over anhydrous Na2SO4, filtered, and concentrated to yield an pale yellow oil. This residue was further purified by column chromatography (silica gel, 3:1 Hexanes/EtOAc) to yield 12 (0.31 g, 44%) as a white foam: 1H NMR (300 MHz, CDCl3) δ 7.86-6.91 (m, 9 H), 5.82 (m, 2 H), 5.67 (m, 1 H), 5.09 (m, 4 H), 3.48 (s, 3 H), 2.73-2.28 (m, 5 H), 1.92 (m, 1 H), 1.61 (m, 1 H), 1.42 (s, 9 H), 1.27 (m, 1 H), 0.93 (m, 6 H); ESI MS m/z=626 [C35H42F3N3O4+H]+. washed with 5% aqueous solution of LiCl (3×100 mL), 1 N HCl (1×100 mL), saturated aqueous NaHCO3 (2×100 mL), brine dried over anhydrous Na2SO4 filtered concentrated to yield an pale yellow oil This residue was further purified by column chromatography (silica gel, 3:1 Hexanes/EtOAc)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 11 (240 mg, 0.46 mmol) and HATU (350 mg, 0.92 mmol) were dissolved in DMF (2 mL) and diisopropylethylamine (0.16 mL, 0.92 mmol) was added. The mixture was stirred for 15 min at ambient temperature, and then treated with anhydrous ammonia for 20 min. Stirring was continued overnight. DMF was removed in vacuo, and the residue was diluted with ethyl acetate, washed with water and brine, then dried over MgSO4. After evaporation of the solvent, the residue was purified on silica gel (5% methanol/methylene chloride) to afford product 12 as a white solid. 12, a mixture of two diastereomers, was then separated on silica gel, using increasing gradient of 20-50% ethyl acetate-methylene chloride, to give first eluting isomer 12a (43 mg, 18%) and the second eluting isomer 12b (61 mg, 25%) both as a white solids. 12a: MS m/z 521.2 (MH+). 12b: MS m/z 521.2 (MH+). Stirring was continued overnight DMF was removed in vacuo the residue was diluted with ethyl acetate washed with water and brine dried over MgSO4 After evaporation of the solvent the residue was purified on silica gel (5% methanol/methylene chloride)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 250 milliliter round-bottom flask was equipped with a reflux condenser, a stir bar, a nitrogen inlet, and charged with 100 grams diallylsuccinate (0.504 moles) and 30 parts per million Platinum (64.1 microliters (μl) of a 5% Karstedt's solution). The mixture was heated and stirred at 70° C. for 5 minutes after which time trimethoxysilane was slowly added (145 milliliters; 135 grams; 1.11 mol). The mixture was allowed to react for 24 hours after which time the excess trimethoxysilane was stripped in vacuo. A yield of 184 grams of bis(trimethoxysilylpropyl)succinate (84% yield) was obtained. The purity and identity of the product were determined by proton nuclear magnetic resonance spectroscopy (4.1 ppm 4H triplet, 3.5 ppm 18H singlet, 2.6 ppm 4H singlet, 1.8 ppm 4H multiplet, 0.6 ppm 4H triplet). A 250 milliliter round-bottom flask was equipped with a reflux condenser, a stir bar, a nitrogen inlet The mixture was heated was slowly added (145 milliliters; 135 grams; 1.11 mol)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of 10 (380 mg, 1.1 mmol), DIPEA (1 mL, 5.7 mmol), and 11 (0.37 g, 1.2 mmol) in DMF (30 mL) was added HATU (0.43 g, 1.1 mmol) and the solution was allowed to stir for 24 h at room temperature. The solution was diluted with EtOAc (150 mL) and washed with 5% aqueous solution of LiCl (3×100 mL), 1 N HCl (1×100 mL), saturated aqueous NaHCO3 (2×100 mL), brine, dried over anhydrous Na2SO4, filtered, and concentrated to yield an pale yellow oil. This residue was further purified by column chromatography (silica gel, 3:1 Hexanes/EtOAc) to yield 12 (0.31 g, 44%) as a white foam: 1H NMR (300 MHz, CDCl3) δ 7.86-6.91 (m, 9 H), 5.82 (m, 2 H) 5.67 (m, 1 H), 5.09 (m, 4 H), 3.48 (s, 3 H), 2.73-2.28 (m, 5 H), 1.92 (m, 1 H), 1.61 (m, 1 H), 1.42 (s, 9 H), 1.27 (m, 1 H), 0.93 (m, 6 H); ESI MS m/z=626 [C35H42F3N3O4+H]+. washed with 5% aqueous solution of LiCl (3×100 mL), 1 N HCl (1×100 mL), saturated aqueous NaHCO3 (2×100 mL), brine dried over anhydrous Na2SO4 filtered concentrated to yield an pale yellow oil This residue was further purified by column chromatography (silica gel, 3:1 Hexanes/EtOAc)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 11 (240 mg, 0.46 mmol) and HATU (350 mg, 0.92 mmol) were dissolved in DMF (2 mL) and diisopropylethylamine (0.16 mL, 0.92 mmol) was added. The mixture was stirred for 15 min at ambient temperature, and then treated with anhydrous ammonia for 20 min. Stirring was continued overnight. DMF was removed in vacuo, and the residue was diluted with ethyl acetate, washed with water and brine, then dried over MgSO4. After evaporation of the solvent, the residue was purified on silica gel (5% methanol/methylene chloride) to afford product 12 as a white solid. 12, a mixture of two diastereomers, was then separated on silica gel, using increasing gradient of 20-50% ethyl acetate-methylene chloride, to give first eluting isomer 12a (43 mg, 18%.) and the second eluting isomer 12b (61 mg, 25%) both as a white solids. 12a: MS m/z 521.2 (MH+). 12b: MS m/z 521.2 (MH+). Stirring was continued overnight DMF was removed in vacuo the residue was diluted with ethyl acetate washed with water and brine dried over MgSO4 After evaporation of the solvent the residue was purified on silica gel (5% methanol/methylene chloride)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A solution of compound 29 (300 mg, 0.54 mmol) in 50 ml TFA/CH2Cl2 (1:1) was stirred for 2 hr at ambient temperature, then concentrated under vacuum. Two cycles of toluene addition and removal of volatiles gave 250 mg of 30 as a white solid (92%) which was used in the next step without purification. ESI ES+=502.3 (M+1) Step 3: Preparation of 2,2-Diallyl-3-isobutyl-N-4-(1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)-succinamide 31. To a solution of 30 (250 mg, 0.5 mmol) in 30 ml DMF was added HATU (250 mg, 0.66 mmol) and DIEA (400 uL, 2.2 mmol). After stirring for 2 hrs, ammonia gas was bubbled into the solution for 5 minutes using a glass inlet tube. The mixture was then stirred at ambient temperature overnight. Water was added (10 mL) and the solvent was removed under vacuum to give a yellow oil which was taken up in ethyl acetate and water (1:1). The organic layer was washed twice with water and then brine, and dried over Na2SO4. After filtration and concentration, the crude product was purified using silica gel chromatography (CH2Cl2/methanol 10:0.5) to give compound 31 (120 mg) as a white solid (48%). 1H NMR (CDCl3) 0.95-0.88 (dd, 6H), 1.32-1.28 (m, 1H), 1.64-1.50 (m, 1H), 1.90-1.80 (m, 1H), 2.35-2.00 (m, 1H), 2.80-2.54 (m, 4H), 3.48 (s, 3H), 5.38-5.14 (m, 5H), 5.54-5.51 (d, 1H), 5.90-5.78 (m, 2H), 7.65-7.25 (m, 9H), 8.52 (s, 1H). ESI ES+=523.2 (M+Na). Step 4: Preparation of 1-[(1R)-3-methyl-1-[1,3-dihydro-1-methyl-2-oxo-5-phenyl-2H-1,4-benzodiazepin-3-ylcarbamoyl]-butyl]-cyclopent-3-enecarboxylic amide 32. To a solution of 31 (110 mg, 0.22 mmol) in 20 ml of toluene and CH2Cl2 (1:1) at 100 degree was added (bis(tricyclohexylphosphine)-benzylidine ruthenium (IV) dichloride) (24 mg, 0.029 mmol). The mixture was stirred at 100 degree for 4 hrs and another 24 mg Grubbs' catalyst was added. The mixture was then stirred at 100 degree for another 4 hrs. Then the solution was cooled to RT, after which 100 mg of charcoal was added. The mixture was filtered through celite to provide a slightly yellow solution, then concentrated. The residue was purified in silica gel chromatography with CH2Cl2/methanol (10:0.5) to give 48 mg of 32 (46%). 1H NMR (CDCl3) 0.97-0.90 (dd, 6H), 1.30-1.25 (m, 1H), 1.65-1.57 (m, 1H), 2.00-1.85 (m, 1H), 2.40-2.30 (d, 1H), 2.80-2.65 (m, 2H), 3.00-2.80 (d, 1H), 3.40-3.20 (m, 1H), 3.47 (s, 3H), 5.40-5.20 (s, 1H), 5.52-5.49 (d, 1H), 5.80-5.71 (m, 2H), 7.63-7.20 (m, 9H), 7.90 (s, 1H). API AP+ 473.1 (M+1). was used in the next step without purification ESI ES+=502.3 (M+1) Step 3: Preparation of 2,2-Diallyl-3-isobutyl-N-4-(1-methyl-2-oxo-5-phenyl-2,3-dihydro-1H-benzo[e][1,4]diazepin-3-yl)-succinamide 31 ammonia gas was bubbled into the solution for 5 minutes The mixture was then stirred at ambient temperature overnight Water was added (10 mL) the solvent was removed under vacuum to give a yellow oil which The organic layer was washed twice with water brine, and dried over Na2SO4 After filtration and concentration the crude product was purified