4-(氯甲基)-1-环戊基-2-(三氟甲基)苯

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 50 liter glass reactor containing ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (2.000 kg, 1.000 equiv.) was added cesium carbonate (3.266 kg, 1.300 equiv.) and acetonitrile (15.720 kg) under nitrogen. To the resulting mixture was added 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (2.228 kg, 1.100 equiv.) over approximately one hour while maintaining the stirred reactor contents at 40° C.±5° C. After the addition of 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene the reactor contents were heated to 65° C.±5° C. with stirring until the concentration of ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate in the reaction mixture was less than 2.0% area by HPLC. The reaction mixture was cooled to 50° C.±5° C. and filtered under nitrogen through a fine filter cloth with suction to remove cesium salts (Note: ethyl 2-(7-(4-cyclopentyl-3-(trifluoromethyl)benzyloxy)-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate may precipitate below 30° C.). The filter cake was washed with fresh hot (50° C.±5° C.) acetonitrile (5.658 kg divided in approximately three equal portions). The filtrates were returned to the reactor. The combined filtrates were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. To the reactor was added ethyl alcohol (3.156 kg) and once again concentrated with stirring by vacuum distillation with a jacket temperature of 60° C.±10° C. Once again, ethyl alcohol (3.156 kg) was added to the reactor and the contents were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. to a reactor volume of approximately 14 L. The stirred reactor contents were cooled to 0° C.±5° C. and the temperature maintained for 4 hours to facilitate the crystallization of the product. The resulting slurry was filtered. The filter cake was washed with cold 0° C.±5° C. ethyl alcohol (2×3.156 kg). The filter cake was dried under vacuum at 35° C.±5° C. until the weight loss over ≧1 hour was ≦2% to provide 3.0943 kg (81.0% yield) of the title compound as a solid. while maintaining the stirred reactor contents at 40° C.±5° C were heated to 65° C.±5° C. The reaction mixture was cooled to 50° C.±5° C. filtered under nitrogen through a fine filter cloth with suction to remove cesium salts (Note: ethyl 2-(7-(4-cyclopentyl-3-(trifluoromethyl)benzyloxy)-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate may precipitate below 30° C.) The filter cake was washed with fresh hot (50° C.±5° C.) acetonitrile (5.658 kg The combined filtrates were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C To the reactor was added ethyl alcohol (3.156 kg) once again concentrated Once again, ethyl alcohol (3.156 kg) was added to the reactor the contents were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. to a reactor volume of approximately 14 L The stirred reactor contents were cooled to 0° C.±5° C. the temperature maintained for 4 hours the crystallization of the product The resulting slurry was filtered The filter cake was washed with cold 0° C.±5° C. ethyl alcohol (2×3.156 kg) The filter cake was dried under vacuum at 35° C.±5° C. until the weight loss over ≧1 hour

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 50 liter glass reactor containing ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (2.000 kg, 1.000 equiv.) was added cesium carbonate (3.266 kg, 1.300 equiv.) and acetonitrile (15.720 kg) under nitrogen. To the resulting mixture was added 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (2.228 kg, 1.100 equiv.) over approximately one hour while maintaining the stirred reactor contents at 40° C.±5° C. After the addition of 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene the reactor contents were heated to 65° C.±5° C. with stirring until the concentration of ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate in the reaction mixture was less than 2.0% area by HPLC. The reaction mixture was cooled to 50° C.±5° C. and filtered under nitrogen through a fine filter cloth with suction to remove cesium salts (Note: ethyl 2-(7-(4-cyclopentyl-3-(trifluoromethyl)benzyloxy)-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate may precipitate below 30° C.). The filter cake was washed with fresh hot (50° C.±5° C.) acetonitrile (5.658 kg divided in approximately three equal portions). The filtrates were returned to the reactor. The combined filtrates were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. To the reactor was added ethyl alcohol (3.156 kg) and once again concentrated with stirring by vacuum distillation with a jacket temperature of 60° C.±10° C. Once again, ethyl alcohol (3.156 kg) was added to the reactor and the contents were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. to a reactor volume of approximately 14 L. The stirred reactor contents were cooled to 0° C.±5° C. and the temperature maintained for 4 hours to facilitate the crystallization of the product. The resulting slurry was filtered. The filter cake was washed with cold 0° C.±5° C. ethyl alcohol (2×3.156 kg). The filter cake was dried under vacuum at 35° C.±5° C. until the weight loss over ≧1 hour was ≦2% to provide 3.0943 kg (81.0% yield) of the title compound as a solid. while maintaining the stirred reactor contents at 40° C.±5° C were heated to 65° C.±5° C. The reaction mixture was cooled to 50° C.±5° C. filtered under nitrogen through a fine filter cloth with suction to remove cesium salts (Note: ethyl 2-(7-(4-cyclopentyl-3-(trifluoromethyl)benzyloxy)-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate may precipitate below 30° C.) The filter cake was washed with fresh hot (50° C.±5° C.) acetonitrile (5.658 kg The combined filtrates were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C To the reactor was added ethyl alcohol (3.156 kg) once again concentrated Once again, ethyl alcohol (3.156 kg) was added to the reactor the contents were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. to a reactor volume of approximately 14 L The stirred reactor contents were cooled to 0° C.±5° C. the temperature maintained for 4 hours the crystallization of the product The resulting slurry was filtered The filter cake was washed with cold 0° C.±5° C. ethyl alcohol (2×3.156 kg) The filter cake was dried under vacuum at 35° C.±5° C. until the weight loss over ≧1 hour

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 2 L, 3-necked, round-bottomed flask under nitrogen atmosphere were placed ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (55.85 g, 215 mmol), cesium carbonate (84.2 g, 258 mmol), 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (68 g, 259 mmol) in DMA (670 mL). The mixture was stirred for 15 minutes at room temperature and heated at 50° C. overnight. The mixture was cooled down to room temperature and filtered. The filtrate was concentrated under vacuum. Hexanes (400 mL) were added and the mixture was heated to 40° C. to give a dark solution. The solution was cooled down to room temperature over the weekend. The mixture was concentrated in vacuo and dried under vacuum to give the title compound (129.7 g). LCMS m/z=486.2. In a 2 L, 3-necked, round-bottomed flask under nitrogen atmosphere were placed heated at 50° C. overnight The mixture was cooled down to room temperature filtered The filtrate was concentrated under vacuum Hexanes (400 mL) were added the mixture was heated to 40° C. to give a dark solution The solution was cooled down to room temperature over the weekend The mixture was concentrated in vacuo dried under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (50.0 mg, 0.193 mmol) and 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (152.0 mg, 0.578 mmol) in DMF (3 mL) was added cesium carbonate (75.0 mg, 0.231 mmol). The mixture was stirred at room temperature overnight, filtered through Celite®, and concentrated under reduced pressure. The residue was purified by HPLC to give the title compound as a light pink oil (38.7 mg). LCMS m/z=486.5 [M+H]+. filtered through Celite® concentrated under reduced pressure The residue was purified by HPLC

反应条件: temp:78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (24.0 g, 1.0 eq) was charged into a 1 L, 3-neck round bottom flask set in a heating mantel with a J-KEM controller. Cesium carbonate (39.2 g, 1.3 eq) was charged into the flask. Acetonitrile (250 mL) was charged into the flask and the reaction mixture was stirred with a magnetic stir bar. 4-(Chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (26.7 g, 1.1 eq) was charged slowly over 20 minutes while heating the reaction mixture. The internal temperature at the beginning of the charge was about 21° C. and the internal temperature at the end of the charge was about 82° C. Reaction temperature was maintained at 78° C. IPC taken after 2.0 hours indicated 95% conversion to product by HPLC. After 2.5 hours the reaction temperature was reduced from about 78° C. to about 54° C. over 33 minutes. 125 mL of acetonitrile (5 vol) was heated to 50° C. in a 250 mL Ehrlenmeyer flask. Celite® was placed in a glass sintered filter funnel and acetonitrile used to wash and pack the filter aid. The acetonitrile wash was discarded to waste. The packed Celite® was approximately 0.5 inches. The reaction mixture was cooled to about 54° C. and filtered through the Celite® filter aid in the glass sintered filter funnel and washed with the 125 mL acetonitrile heated to about 50° C. The acetonitrile filtrate was stirred under nitrogen at ambient temperature for 1.0 hour. The filtrate was concentrated under reduced pressure at about 24° C. forming a thick slurry; 260 mL of distillate was collected. 375 mL of methanol was used to transfer the slurry into a 1 L round bottom flask. The slurry was stirred under nitrogen at ambient temperature for 15.0 hours. The slurry was placed in an ice/salt bath and stirred under nitrogen for 1.2 hours. 150 mL of methanol was placed in an ice/salt bath. The solids were filtered in a Whatman disposable filter cup at about −11° C. and washed with chilled methanol (125 mL). The off-white solids were placed in a vacuum oven set at about 29° C. for 22.5 hours to afford 35.7 g of ethyl 2-(7-(4-cyclopentyl-3-(trifluoromethyl)benzyloxy)-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (Compound of Formula (IIk), wherein R3 is ethyl), 79% yield with 99.57 Area % by HPLC. while heating the reaction mixture was about 21° C. was about 82° C Reaction temperature After 2.5 hours the reaction temperature was reduced from about 78° C. to about 54° C. over 33 minutes sintered filter funnel to wash The acetonitrile wash The reaction mixture was cooled to about 54° C. filtered through the Celite® filter aid in the glass sintered filter funnel washed with the 125 mL acetonitrile heated to about 50° C The acetonitrile filtrate was stirred under nitrogen at ambient temperature for 1.0 hour The filtrate was concentrated under reduced pressure at about 24° C. forming a thick slurry 260 mL of distillate was collected The slurry was stirred under nitrogen at ambient temperature for 15.0 hours The slurry was placed in an ice/salt bath stirred under nitrogen for 1.2 hours 150 mL of methanol was placed in an ice/salt bath The solids were filtered in a Whatman disposable filter cup at about −11° C. washed with chilled methanol (125 mL) set at about 29° C. for 22.5 hours

反应条件: temp:17.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To (4-cyclopentyl-3-(trifluoromethyl)phenyl)methanol (110 g, 113 mmol), thionyl chloride (329 mL, 4.50 mol) was added dropwise at such a rate as to maintain the internal temperature between 10-25° C. (cooled with ice-water). The resulting mixture was stirred at 50° C. for 3.5 h followed by 6 h at 25° C. The mixture was concentrated under reduced pressure and the resulting oily residue poured into ice-water (450 mL) under vigorous stirring. The layers were separated and the aqueous phase extracted with CH2Cl2 (3×400 mL). The combined organic layers were washed with saturated NaHCO3 (400 mL), brine (2×400 mL), dried (Na2SO4), filtered over fresh Na2SO4, and concentrated in vacuo to give the title compound as a pale yellow oil (113.3 g). 1H NMR (400 MHz, CDCl3) δ ppm 1.67-1.57 (m, 2H), 1.81-1.71 (m, 2H), 1.94-1.84 (m, 2H), 2.16-2.07 (m, 2H), 3.39 (quintet, J=8.6 Hz, 1H), 4.61 (s, 2H), 7.49 (d, J=8.4 Hz, 1H), 7.54 (dd, J=8.4 Hz, 1.6 Hz, 1H), 7.63 (d, J=1.6 Hz, 1H). followed by 6 h at 25° C The mixture was concentrated under reduced pressure the resulting oily residue poured into ice-water (450 mL) under vigorous stirring The layers were separated the aqueous phase extracted with CH2Cl2 (3×400 mL) The combined organic layers were washed with saturated NaHCO3 (400 mL), brine (2×400 mL) dried (Na2SO4) filtered over fresh Na2SO4 concentrated in vacuo

反应条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To (4-cyclopentyl-3-(trifluoromethyl)phenyl)methanol (1.21 g, 4.95 mmol) was added thionyl chloride (5.5 mL, 74.2 mmol). The mixture was heated at 50° C. for 2 h before it was allowed to cool to room temperature and stirred at room temperature overnight. The mixture was poured into ice and stirred for 5 min before it was extracted with dichloromethane. The organic extract was washed with saturated aqueous sodium bicarbonate solution, dried over anhydrous sodium sulfate and concentrated under reduced pressure to give the title compound as an oil (1.16 g). 1H NMR (400 MHz, CDCl3) δ ppm 1.55-1.63 (m, 2H), 1.69-1.77 (m, 2H), 1.82-1.90 (m, 2H), 2.05-2.13 (m, 2H), 3.37 (quintet, J=8.59 Hz, 1H), 4.58 (s, 2H), 7.46 (d, J=8.00 Hz, 1H), 7.52 (d, J=8.00 Hz, 1H), 7.61 (d, J=1.52 Hz, 1H). to cool to room temperature The mixture was poured into ice stirred for 5 min before it was extracted with dichloromethane The organic extract was washed with saturated aqueous sodium bicarbonate solution dried over anhydrous sodium sulfate concentrated under reduced pressure

反应条件: temp:5.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a 50 liter glass reactor containing ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (2.000 kg, 1.000 equiv.) was added cesium carbonate (3.266 kg, 1.300 equiv.) and acetonitrile (15.720 kg) under nitrogen. To the resulting mixture was added 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (2.228 kg, 1.100 equiv.) over approximately one hour while maintaining the stirred reactor contents at 40° C.±5° C. After the addition of 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene the reactor contents were heated to 65° C.±5° C. with stirring until the concentration of ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate in the reaction mixture was less than 2.0% area by HPLC. The reaction mixture was cooled to 50° C.±5° C. and filtered under nitrogen through a fine filter cloth with suction to remove cesium salts (Note: ethyl 2-(7-(4-cyclopentyl-3-(trifluoromethyl)benzyloxy)-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate may precipitate below 30° C.). The filter cake was washed with fresh hot (50° C.±5° C.) acetonitrile (5.658 kg divided in approximately three equal portions). The filtrates were returned to the reactor. The combined filtrates were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. To the reactor was added ethyl alcohol (3.156 kg) and once again concentrated with stirring by vacuum distillation with a jacket temperature of 60° C.±10° C. Once again, ethyl alcohol (3.156 kg) was added to the reactor and the contents were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. to a reactor volume of approximately 14 L. The stirred reactor contents were cooled to 0° C. f 5° C. and the temperature maintained for 4 hours to facilitate the crystallization of the product. The resulting slurry was filtered. The filter cake was washed with cold 0° C.±5° C. ethyl alcohol (2×3.156 kg). The filter cake was dried under vacuum at 35° C.±5° C. until the weight loss over hour was to provide 3.0943 kg (81.0% yield) of the title compound as a solid. while maintaining the stirred reactor contents at 40° C.±5° C were heated to 65° C.±5° C. The reaction mixture was cooled to 50° C.±5° C. filtered under nitrogen through a fine filter cloth with suction to remove cesium salts (Note: ethyl 2-(7-(4-cyclopentyl-3-(trifluoromethyl)benzyloxy)-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate may precipitate below 30° C.) The filter cake was washed with fresh hot (50° C.±5° C.) acetonitrile (5.658 kg The combined filtrates were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C To the reactor was added ethyl alcohol (3.156 kg) once again concentrated Once again, ethyl alcohol (3.156 kg) was added to the reactor the contents were concentrated by vacuum distillation with a jacket temperature of 60° C.±10° C. to a reactor volume of approximately 14 L the temperature maintained for 4 hours the crystallization of the product The resulting slurry was filtered The filter cake was washed with cold 0° C.±5° C. ethyl alcohol (2×3.156 kg) The filter cake was dried under vacuum at 35° C.±5° C. until the weight loss over hour

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a 2 L, 3-necked, round-bottomed flask under nitrogen atmosphere were placed ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (55.85 g, 215 mmol), cesium carbonate (84.2 g, 258 mmol), 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (68 g, 259 mmol) in DMA (670 mL). The mixture was stirred for 15 minutes at room temperature and heated at 50° C. overnight. The mixture was cooled down to room temperature and filtered. The filtrate was concentrated under vacuum. Hexanes (400 mL) were added and the mixture was heated to 40° C. to give a dark solution. The solution was cooled down to room temperature over the weekend. The mixture was concentrated in vacuo and dried under vacuum to give the title compound (129.7 g). LCMS m/z=486.2. In a 2 L, 3-necked, round-bottomed flask under nitrogen atmosphere were placed heated at 50° C. overnight The mixture was cooled down to room temperature filtered The filtrate was concentrated under vacuum Hexanes (400 mL) were added the mixture was heated to 40° C. to give a dark solution The solution was cooled down to room temperature over the weekend The mixture was concentrated in vacuo dried under vacuum

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of ethyl 2-(7-hydroxy-1,2,3,4-tetrahydrocyclopenta[b]indol-3-yl)acetate (50.0 mg, 0.193 mmol) and 4-(chloromethyl)-1-cyclopentyl-2-(trifluoromethyl)benzene (152.0 mg, 0.578 mmol) in DMF (3 mL) was added cesium carbonate (75.0 mg, 0.231 mmol). The mixture was stirred at room temperature overnight, filtered through Celite®, and concentrated under reduced pressure. The residue was purified by HPLC to give the title compound as a light pink oil (38.7 mg). LCMS m/z=486.5 [M+H]+. filtered through Celite® concentrated under reduced pressure The residue was purified by HPLC