3-氯苯乙酮

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A reaction vessel was charged with sodium hydride (as a 60% oil dispersion, 14.4 g, 360 mmol), DME (120 ml) and 2-chloro-5-trifluoromethylpyridine (20 g, 110 mmol) under nitrogen. 3-Chloroacetophenone (15.5 ml, 200 mmol) was added in portions to the mixture which was stirring at −10° C. The mixture was allowed to warm to ambient temperature and then heated to 40-45° C. for 5 hours. Upon completion of the reaction, the mixture was cooled to 5° C. and 10% aqueous sodium hydroxide solution (60 ml) was slowly added to the reaction mixture followed by methanol (120 ml) then hydroxylamine hydrochloride (38.2 g, 550 mmol). The mixture was heated to 72° C. for 4 hours then cooled and partitioned between water and ethyl acetate, washed with brine and evaporated under vacuum to dryness. The resulting solid was slurried with cyclohexane (60 ml) and dichloromethane (10 ml) then filtered, washing with further cyclohexane. 17.5 g (53%) of the title compound was collected. to warm to ambient temperature heated to 40-45° C. for 5 hours Upon completion of the reaction the mixture was cooled to 5° C. The mixture was heated to 72° C. for 4 hours then cooled partitioned between water and ethyl acetate washed with brine evaporated under vacuum to dryness then filtered washing with further cyclohexane 17.5 g (53%) of the title compound was collected

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a similar fashion, 3-chloroacetophenone was used to prepare 3-methyl-3-(3-chlorophenyl)cinnamonitrile. The nitrile was catalytically reduced (palladium hydroxide, acetic acid, 60 p.s.i. hydrogen 2 hr) to generate 3-methyl-3-(3-chlorophenyl)propylamine. An equal molar amount of the amine, 3′-methoxyacetophenone and 1.25 molar equivalents titanium(IV) isopropoxide were mixed 4 hr at rt and the intermediate imine treated with an ethanolic sodium cyanoborohydride (5 ml of 1 M, 5 mmol). Work-up and chromatography afforded N-[3-methyl-3-(3-chlorophenyl)propyl]-1-(3-methoxyphenyl)ethylamine, 4Z/5A, as an oil; m/z (rel. int.) 283 (M+, 17), 268 (71), 164 (13), 135 (100), 121 (21), 105 (27), 91 (26), 77 (14).

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of Tl(OAc)3 (4.2 g, 11.1 mmol) in acetonitrile (80 ml), trifluoromethanesulfuric acid (5 g, 33.3 mmol) was added dropwise at room temperature and stirred for 15 min. The reaction mixture was then heated to 80° C. and 1-(3-chloro-phenyl)-ethanone (1.14 g, 7.4 mmol) in acetonitrile (40 ml) was added. After one h, the reaction was quenched with dichloromethane and saturated sodium bicarbonate. The organic layer was dried, purified by column chromatography with 5˜19% ethyl acetate in hexanes to give 1.2 (83.9%) g of 5-(3-chloro-phenyl)-2-methyl-oxazole as yellow oil. 1H-NMR(CDCl3) d(ppm): 7.60 (s, 1H), 7.48 (d, 1H), 7.29 (m, 2H), 7.23 (s, 1H) and 2.34 (s, 3H). Step 2: 2-Bromomethyl-5-(3-chloro-phenyl)-oxazole: 5-(3-chloro-phenyl)-2-methyl-oxazole (580 mg, 3 mmol) was mixed with NBS (531 mg, 3 mmol) and BPOA (36.3 mg, 0.15 mmol) in CCl4 at room temperature. The reaction mixture was heated at 75° C. for 2 h and then quenched with water and dichloromethane. The organic layer was dried, concentrated, purified by column chromatography with 2˜5% ethyl acetate in hexanes to give 562 mg (68.3%) of 2-bromomethyl-5-(3-chloro-phenyl)-oxazole as yellow oil. 1H-NMR(CDCl3) d(ppm): 7.67 (s, 1H), 7.54 (d, 1H), 7.35(m, 3H) and 4.56 (s, 2H). After one h, the reaction was quenched with dichloromethane and saturated sodium bicarbonate The organic layer was dried purified by column chromatography with 5˜19% ethyl acetate in hexanes

反应条件: temp:80.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of Tl(OAc)3 (4.2 g, 11.1 mmol) in acetonitrile (80 ml), trifluoromethanesulfuric acid (5 g, 33.3 mmol) was added dropwise at room temperature and stirred for 15 min. The reaction mixture was then heated to 80° C. and 1-(3-chloro-phenyl)-ethanone (1.14 g, 7.4 mmol) in acetonitrile (40 ml) was added. After one h, the reaction was quenched with dichloromethane and saturated sodium bicarbonate. The organic layer was dried, purified by column chromatography with 5˜19% ethyl acetate in hexanes to give 1.2 (83.9%) g of 5-(3-chloro-phenyl)-2-methyl-oxazole as yellow oil. 1H-NMR(CDCl3) d(ppm): 7.60 (s, 1H), 7.48 (d, 1H), 7.29 (m, 2H), 7.23 (s, 1H) and 2.34 (s, 3H). Step 2: 2-Bromomethyl-5-(3-chloro-phenyl)-oxazole: 5-(3-chloro-phenyl)-2-methyl-oxazole (580 mg, 3 mmol) was mixed with NBS (531 mg, 3 mmol) and BPOA (36.3 mg, 0.15 mmol) in CCl4 at room temperature. The reaction mixture was heated at 75° C. for 2 h and then quenched with water and dichloromethane. The organic layer was dried, concentrated, purified by column chromatography with 2˜5% ethyl acetate in hexanes to give 562 mg (68.3%) of 2-bromomethyl-5-(3-chloro-phenyl)-oxazole as yellow oil. 1H-NMR(CDCl3) d(ppm): 7.67 (s, 1H), 7.54 (d, 1H), 7.35(m, 3H) and 4.56 (s, 2H). After one h, the reaction was quenched with dichloromethane and saturated sodium bicarbonate The organic layer was dried purified by column chromatography with 5˜19% ethyl acetate in hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Sodium hydride (60% oil dispersion, 1.24 g, 31.1 mmol) was added in portions to a solution of 3-chloroacetophenone (4.0 g, 25.9 mmol) and diethyl oxalate (4.54 g, 31.1 mmol) in DMF (32 ml) at 0° C. The mixture stirred at room temperature for 1 h and was then heated at 80° C. for a half an h. After cooling, the mixture was treated with 3N HCl and then diluted with ethyl acetate. The organic layer was washed with water (3×) and saturated brine, dried over anhydrous sodium sulfate, filtered and concentrated. The resulting residue was then purified by flash column chromatography on silica using 0-10% ethyl acetate in hexanes to afford of 4-(3-chloro-phenyl)-2,4-dioxo-butyric acid ethyl ester (4.43 g, 67%, yellow solid). 1H NMR (CDCl3) d (ppm): 15.12 (br s, 1H), 7.98 (s, 1H), 7.88 (d, 1H), 7.58 (d, 1H), 7.47 (t, 1H), 7.05 (s, 1H), 4.39 (m, 2H), 1.41 (m, 3H). Step 2: 5-(3-Chloro-phenyl)-isoxazole-3-carboxylic acid ethyl ester: A solution of 4-(3-chloro-phenyl)-2,4-dioxo-butyric acid ethyl ester (3.0 g, 11.8 mmol) and hydroxylamine hydrochloride (2.46 g, 35.4 mmol) in methanol (60 ml) was heated at 80° C. for 4 h. After cooling, the mixture was filtered and washed with cold methanol to afford 5-(3-chloro-phenyl)-isoxazole-3-carboxylic acid ethyl ester (2.0 g, 71%, white solid). 1H NMR (CDCl3) d (ppm): 7.82 (s, 1H), 7.72 (m, 1H), 7.47 (m, 2H), 4.03 (s, 3H). Mixture of both methyl and ethyl ester (mostly methyl). Step 3: 1-[5-(3-Chloro-phenyl)-isoxazol-3-yl]-ethanone: In a screw cap vial equipped with stir bar added methyl magnesium iodide (3M in diethyl ether) (0.79 ml, 2.38 mmol), toluene (1 ml), tetrahydrofuran (0.39 ml, 4.77 mmol) and triethylamine (1 ml, 7.15 mmol). Cooled the solution down to 0° C. and to it added solution of 5-(3-chloro-phenyl)-isoxazole-3-carboxylic acid ethyl ester (300 mg, 1.19 mmol) in toluene (5 ml). Left the resulting mixture stirring at 0° C. for 5 h. Reaction mixture was quenched with 1N hydrochloric acid (aqueous, 6.5 ml, 6.5 mmol), diluted with toluene (35 ml), sequentially is washed with water (50 ml), saturated sodium bicarbonate (aqueous, 30 ml), water (50 ml) and brine (30 ml). The organic phase was concentrated, in-vacuo. The isolated residue was dissolved in methanol (8 ml) and 20% potassium hydroxide (aqueous, 1 ml). The mixture was stirred at 45° C. for 30 min. At this point the mixture was concentrated, in-vacuo. The isolated residue was dissolved in toluene (60 ml), sequentially washed with water (50 ml), saturated sodium bicarbonate (aqueous, 50 ml) and water (50 ml). The organic phase was concentrated, in-vacuo. The crude residue was purified on silica gel using 2% ethyl acetate in hexanes to isolate the desired compound as a white solid (156 mg, 60%). 1H-NMR (CDCl3), d (ppm): 7.77 (m, 1H), 7.66 (m, 1H), 7.42 (m, 2H), 6.90 (s, 1H), 2.69 (s, 3H). Step 4: 1-[5-(3-Chloro-phenyl)-isoxazol-3-yl]-ethanol: In a screw cap vial equipped with stir bar added 1-[5-(3-chloro-phenyl)-isoxazol-3-yl]-ethanone (100 mg, 0.45 mmol), sodium borohydride (34 mg, 0.90 mmol) and methanol (3 ml). Left the resulting mixture stirring at room temperature for 3 h. Reaction was quenched with water (30 ml) and brine (30 ml), extracted with dichloromethane (3×30 ml). Combined organic phase was dried (sodium sulfate), filtered and concentrated, in-vacuo to isolate 1-[5-(3-Chloro-phenyl)-isoxazol-3-yl]-ethanol as a white solid (110 mg). 1H-NMR (CDCl3), d (ppm): 7.69 (m, 1H), 7.59 (m, 1H), 7.37 (m, 2H), 6.59 (s, 1H), 5.07 (q, 1H), 3.45 (bs, 1H), 1.58 (d, 3H). was then heated at 80° C. for a half an h After cooling The organic layer was washed with water (3×) and saturated brine dried over anhydrous sodium sulfate filtered concentrated The resulting residue was then purified by flash column chromatography on silica using 0-10% ethyl acetate in hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Sodium hydride (60% oil dispersion, 1.24 g, 31.1 mmol) was added in portions to a solution of 3-chloroacetophenone (4.0 g, 25.9 mmol) and diethyl oxalate (4.54 g, 31.1 mmol) in DMF (32 ml) at 0° C. The mixture stirred at room temperature for 1 h and was then heated at 80° C. for a half an h. After cooling, the mixture was treated with 3N HCl and then diluted with ethyl acetate. The organic layer was washed with water (3×) and saturated brine, dried over anhydrous sodium sulfate, filtered and concentrated. The resulting residue was then purified by flash column chromatography on silica using 0-10% ethyl acetate in hexanes to afford of 4-(3-chloro-phenyl)-2,4-dioxo-butyric acid ethyl ester (4.43 g, 67%, yellow solid). 1H NMR (CDCl3) d (ppm): 15.12 (br s, 1H), 7.98 (s, 1H), 7.88 (d, 1H), 7.58 (d, 1H), 7.47 (t, 1H), 7.05 (s, 1H), 4.39 (m, 2H), 1.41 (m, 3H). Step 2: 5-(3-Chloro-phenyl)-isoxazole-3-carboxylic acid ethyl ester: A solution of 4-(3-chloro-phenyl)-2,4-dioxo-butyric acid ethyl ester (3.0 g, 11.8 mmol) and hydroxylamine hydrochloride (2.46 g, 35.4 mmol) in methanol (60 ml) was heated at 80° C. for 4 h. After cooling, the mixture was filtered and washed with cold methanol to afford 5-(3-chloro-phenyl)-isoxazole-3-carboxylic acid ethyl ester (2.0 g, 71%, white solid). 1H NMR (CDCl3) d (ppm): 7.82 (s, 1H), 7.72 (m, 1H), 7.47 (m, 2H), 4.03 (s, 3H). Mixture of both methyl and ethyl ester (mostly methyl). Step 3: 1-[5-(3-Chloro-phenyl)-isoxazol-3-yl]-ethanone: In a screw cap vial equipped with stir bar added methyl magnesium iodide (3M in diethyl ether) (0.79 ml, 2.38 mmol), toluene (1 ml), tetrahydrofuran (0.39 ml, 4.77 mmol) and triethylamine (1 ml, 7.15 mmol). Cooled the solution down to 0° C. and to it added solution of 5-(3-chloro-phenyl)-isoxazole-3-carboxylic acid ethyl ester (300 mg, 1.19 mmol) in toluene (5 ml). Left the resulting mixture stirring at 0° C. for 5 h. Reaction mixture was quenched with 1N hydrochloric acid (aqueous, 6.5 ml, 6.5 mmol), diluted with toluene (35 ml), sequentially is washed with water (50 ml), saturated sodium bicarbonate (aqueous, 30 ml), water (50 ml) and brine (30 ml). The organic phase was concentrated, in-vacuo. The isolated residue was dissolved in methanol (8 ml) and 20% potassium hydroxide (aqueous, 1 ml). The mixture was stirred at 45° C. for 30 min. At this point the mixture was concentrated, in-vacuo. The isolated residue was dissolved in toluene (60 ml), sequentially washed with water (50 ml), saturated sodium bicarbonate (aqueous, 50 ml) and water (50 ml). The organic phase was concentrated, in-vacuo. The crude residue was purified on silica gel using 2% ethyl acetate in hexanes to isolate the desired compound as a white solid (156 mg, 60%). 1H-NMR (CDCl3), d (ppm): 7.77 (m, 1H), 7.66 (m, 1H), 7.42 (m, 2H), 6.90 (s, 1H), 2.69 (s, 3H). Step 4: 1-[5-(3-Chloro-phenyl)-isoxazol-3-yl]-ethanol: In a screw cap vial equipped with stir bar added 1-[5-(3-chloro-phenyl)-isoxazol-3-yl]-ethanone (100 mg, 0.45 mmol), sodium borohydride (34 mg, 0.90 mmol) and methanol (3 ml). Left the resulting mixture stirring at room temperature for 3 h. Reaction was quenched with water (30 ml) and brine (30 ml), extracted with dichloromethane (3×30 ml). Combined organic phase was dried (sodium sulfate), filtered and concentrated, in-vacuo to isolate 1-[5-(3-Chloro-phenyl)-isoxazol-3-yl]-ethanol as a white solid (110 mg). 1H-NMR (CDCl3), d (ppm): 7.69 (m, 1H), 7.59 (m, 1H), 7.37 (m, 2H), 6.59 (s, 1H), 5.07 (q, 1H), 3.45 (bs, 1H), 1.58 (d, 3H). was then heated at 80° C. for a half an h After cooling The organic layer was washed with water (3×) and saturated brine dried over anhydrous sodium sulfate filtered concentrated The resulting residue was then purified by flash column chromatography on silica using 0-10% ethyl acetate in hexanes

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 3′-chloroacetophenone (50 mmol), ethyl cyanoacetate (50 mmol), acetic acid (1.14 mL) ammonium acetate (400 mg), and benzene (50 mL) was heated to reflux in a Dean-Stark apparatus. After approximately 10 hours, additional ethyl cyanoacetate (50 mmol), acetic acid (1.14 mL), and ammonium acetate (400 mg) are added. After an additional 10 hours, the reaction was cooled to room temperature, diluted with ethyl acetate (30 mL), washed with water (240 mL), brine (40 mL), and dried (Na2SO4). After filtering, the extract was concentrated in vacuo and the desired product, as a 1:1 mixture of E and Z-isomers, was isolated by column chromatography on silica gel, eluting with 5% ethyl acetate in petroleum ether. The purified oil solidified on standing at room temperature Yield: 60%. was heated to reflux in a Dean-Stark apparatus After an additional 10 hours washed with water (240 mL), brine (40 mL) dried (Na2SO4) After filtering the extract was concentrated in vacuo the desired product, as a 1:1 mixture of E and Z-isomers was isolated by column chromatography on silica gel eluting with 5% ethyl acetate in petroleum ether on standing at room temperature

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 3′-chloroacetophenone (50 mmol), ethyl cyanoacetate (50 mmol), acetic acid (1.14 mL) ammonium acetate (400 mg), and benzene (50 mL) was heated to reflux in a Dean-Stark apparatus. After approximately 10 hours, additional ethyl cyanoacetate (50 mmol), acetic acid (1.14 mL), and ammonium acetate (400 mg) are added. After an additional 10 hours, the reaction was cooled to room temperature, diluted with ethyl acetate (30 mL), washed with water (240 mL), brine (40 mL), and dried (Na2SO4). After filtering, the extract was concentrated in vacuo and the desired product, as a 1:1 mixture of E and Z-isomers, was isolated by column chromatography on silica gel, eluting with 5% ethyl acetate in petroleum ether. The purified oil solidified on standing at room temperature Yield: 60%. was heated to reflux in a Dean-Stark apparatus After an additional 10 hours washed with water (240 mL), brine (40 mL) dried (Na2SO4) After filtering the extract was concentrated in vacuo the desired product, as a 1:1 mixture of E and Z-isomers was isolated by column chromatography on silica gel eluting with 5% ethyl acetate in petroleum ether on standing at room temperature

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To 20 ml of tetrahydrofuran solution containing 0.69 g of m-chloroacetophenone was added 1.1 g of potassium t-butoxide at room temperature, followed by stirring for 30 minutes. Further, 1 g of 3,3-bis-(methylthio)-1-phenyl-2-propen-1-one was added, followed by stirring for 1 hour. Subsequently, 20 ml of acetic acid and 3 g of ammonium acetate were added, and reaction was carried out for 3 hours under reflux, while distilling away tetrahydrofuran. The reaction liquid was neutralized with an aqueous solution of sodium hydroxide, and the neutralized solution was extracted twice with 50 ml portions of ethyl acetate. The extract was dried with anhydrous magnesium sulfate. Ethyl acetate was distilled away under reduced pressure and the residues were recrystallized from isopropanol to give 1.1 g of 2-(3'-chloromethylphenyl)-4-methylthio-6-phenylpyridine. (m.p. 56.8° C.) by stirring for 1 hour reaction was carried out for 3 hours under reflux while distilling away tetrahydrofuran The reaction liquid the neutralized solution was extracted twice with 50 ml portions of ethyl acetate The extract was dried with anhydrous magnesium sulfate Ethyl acetate was distilled away under reduced pressure the residues were recrystallized from isopropanol