2-十一酮

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet, dropping funnel, thermometer and nitrogen outlet is added 70.2 g of 60% sodium hydride (1.76 mol) in mineral oil. The mineral oil is removed by washing with hexanes. Anhydrous dimethyl sulfoxide (500 ml) is added to the flask and the mixture is heated to 70° C. until evolution of hydrogen stops. The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran. (6-hydroxyhexyl) triphenylphosphonium bromide (443.4 g, 1 mol) is slurried with warm anhydrous dimethyl sulfoxide (50° C., 500 ml) and slowly added to the reaction mixture through the dropping funnel while keeping it at 25-30° C. The mixture is stirred for 30 minutes at room temperature at which time 2-undecanone (187 g, 1.1 mol) is slowly added through a dropping funnel. Reaction is slightly exothermic and cooling is needed to maintain 25-30° C. The mixture is stirred for 18 hr. and then poured into a 5 L beaker containing 1 L purified water with stirring. The oil phase (top) is allowed to separate out in a separatory funnel and the water phase is removed. The water phase is washed with hexanes (500 ml) and the organic phase is separated and combined with the oil phase from the water wash. The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140C and 1 mm Hg. Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet The mineral oil is removed by washing with hexanes Anhydrous dimethyl sulfoxide (500 ml) is added to the flask The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran slowly added to the reaction mixture through the dropping funnel at 25-30° C is slowly added through a dropping funnel Reaction cooling to maintain 25-30° C and then poured into a 5 L beaker containing 1 L purified water with stirring to separate out in a separatory funnel the water phase is removed The water phase is washed with hexanes (500 ml) the organic phase is separated wash The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140C and 1 mm Hg

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Pyrolysis of a sample of the prepared hydroxy-ester at about 300° C. for 2 minutes yields a 1:1 mixture of 2-undecanone and ethyl 3-methylvalerate.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 2-undecanone (10 g, 58.7 mmol), glyoxylic acid monohydrate (5.15 g, 56 mmol) and 85% phosphoric acid (10 ml) was warmed at 80° for 18 hours. On cooling to room temperature, the mixture was diluted with ethyl ether/dichloromethane (50 ml each) and washed thoroughly with brine. Evaporation of the dried (magnesium sulphate) organic phase gave a yellow oil which on crystallization from ethyl ether/petroleum ether gave 4-ketotridec-2-enoic acid as colorless prisms. was warmed at 80° for 18 hours washed thoroughly with brine Evaporation of the dried (magnesium sulphate) organic phase gave a yellow oil which on crystallization from ethyl ether/petroleum ether

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 2-undecanone (10 g, 58.7 mmol), glyoxylic acid monohydrate (5.15 g, 56 mmol) and 85% phosphoric acid (10 ml) was warmed at 80° for 18 hours. On cooling to room temperature, the mixture was diluted with ethyl ether/dichloromethane (50 ml each) and washed thoroughly with brine. Evaporation of the dried (magnesium sulphate) organic phase gave a yellow oil which on crystallization from ethyl ether/petroleum ether gave 4-ketotridec-2-enoic acid as colorless prisms. was warmed at 80° for 18 hours washed thoroughly with brine Evaporation of the dried (magnesium sulphate) organic phase gave a yellow oil which on crystallization from ethyl ether/petroleum ether

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 2-undecanone (10 g, 58.7 mmol), glyoxylic acid monohydrate (5.15 g, 56 mmol) and 85% phosphoric acid (10 ml) was warmed at 80° for 18 hours. On cooling to room temperature, the mixture was diluted with ethyl ether/dichloromethane (50 ml each) and washed thoroughly with brine. Evaporation of the dried (magnesium sulphate) organic phase gave a yellow oil which on crystallization from ethyl ether/petroleum ether gave 4-ketotridec-2-enoic acid as colorless prisms. was warmed at 80° for 18 hours washed thoroughly with brine Evaporation of the dried (magnesium sulphate) organic phase gave a yellow oil which on crystallization from ethyl ether/petroleum ether

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet, dropping funnel, thermometer and nitrogen outlet is added 70.2 g of 60% sodium hydride (1.76 mol) in mineral oil. The mineral oil is removed by washing with hexanes. Anhydrous dimethyl sulfoxide (500 ml) is added to the flask and the mixture is heated to 70° C. until evolution of hydrogen stops. The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran. (6-hydroxyhexyl)triphenylphosphonium bromide (443.4 g, 1 mol) is slurried with warm anhydrous dimethyl sulfoxide (50° C., 500 ml) and slowly added to the reaction mixture through the dropping funnel while keeping it at 25-30° C. The mixture is stirred for 30 minutes at room temperature at which time 2-undecanone (187 g, 1.1 mol) is slowly added through a dropping funnel. Reaction is slightly exothermic and cooling is needed to maintain 25-30° C. The mixture is stirred for 18 hr. and then poured into a 5 L beaker containing 1 L purified water with stirring. The oil phase (top) is allowed to separate out in a separatory funnel and the water phase is removed. The water phase is washed with hexanes (500 ml) and the organic phase is separated and combined with the oil phase from the water wash. The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140 C. and 1 mm Hg. Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet The mineral oil is removed by washing with hexanes Anhydrous dimethyl sulfoxide (500 ml) is added to the flask The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran slowly added to the reaction mixture through the dropping funnel at 25-30° C is slowly added through a dropping funnel Reaction cooling to maintain 25-30° C and then poured into a 5 L beaker containing 1 L purified water with stirring to separate out in a separatory funnel the water phase is removed The water phase is washed with hexanes (500 ml) the organic phase is separated wash The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140 C

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet, dropping funnel, thermometer and nitrogen outlet is added 70.2 g of 60% sodium hydride (1.76 mol) in mineral oil. The mineral oil is removed by washing with hexanes. Anhydrous dimethyl sulfoxide (500 ml) is added to the flask and the mixture is heated to 70° C. until evolution of hydrogen stops. The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran. (6-hydroxyhexyl)triphenylphosphonium bromide (443.4 g, 1 mol) is slurried with warm anhydrous dimethyl sulfoxide (50° C., 500 ml) and slowly added to the reaction mixture through the dropping funnel while keeping it at 25-30° C. The mixture is stirred for 30 minutes at room temperature at which time 2-undecanone (187 g, 1.1 mol) is slowly added through a dropping funnel. Reaction is slightly exothermic and cooling is needed to maintain 25-30° C. The mixture is stirred for 18 hr. and then poured into a 5 L beaker containing 1 L purified water with stirring. The oil phase (top) is allowed to separate out in a separatory funnel and the water phase is removed. The water phase is washed with hexanes (500 ml) and the organic phase is separated and combined with the oil phase from the water wash. The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140 C. and 1 mm Hg. Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet The mineral oil is removed by washing with hexanes Anhydrous dimethyl sulfoxide (500 ml) is added to the flask The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran slowly added to the reaction mixture through the dropping funnel at 25-30° C is slowly added through a dropping funnel Reaction cooling to maintain 25-30° C and then poured into a 5 L beaker containing 1 L purified water with stirring to separate out in a separatory funnel the water phase is removed The water phase is washed with hexanes (500 ml) the organic phase is separated wash The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140 C

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a dried 5L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet, dropping funnel, thermometer and nitrogen outlet is added 70.2 g of 60% sodium hydride (1.76 mol) in mineral oil. The mineral oil is removed by washing with hexanes. Anhydrous dimethyl sulfoxide (500 ml) is added to the cask and the mixture is heated to 70° C. until evolution of hydrogen stops. The reaction mixture is cooled to room temperature followed by addition of 1L of anhydrous tetrahydrofuran. (6-hydroxyhexyl) triphenylphosphonium bromide (443.4 g, 1 mol) is slurried with warm anhydrous dimethyl sulfoxide (50° C., 500 ml) and slowly added to the reaction mixture through the dropping funnel while keeping it at 25-30° C. The mixture is stirred for 30 minutes at room temperature at which time 2-undecanone (187 g, 1.1 mol) is slowly added through a dropping funnel. Reaction is slightly exothennic and cooling is needed to maintain 25-30° C. The .mixture is stirred for 18 hr. and then poured into a 5L beaker containing 1L purified water with stirring. The oil phase (top) is allowed to separate out in a separatory funnel and the water phase is removed. The water phase is washed with hexanes (500 ml) and the organic phase is separated and combined with the oil phase from the water wash. The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140C and 1 mm Hg. Into a dried 5L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet The mineral oil is removed by washing with hexanes Anhydrous dimethyl sulfoxide (500 ml) is added to the cask The reaction mixture is cooled to room temperature followed by addition of 1L of anhydrous tetrahydrofuran slowly added to the reaction mixture through the dropping funnel at 25-30° C is slowly added through a dropping funnel Reaction cooling to maintain 25-30° C purified water with stirring to separate out in a separatory funnel the water phase is removed The water phase is washed with hexanes (500 ml) the organic phase is separated wash The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140C and 1 mm Hg

反应条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet, dropping funnel, thermometer and nitrogen outlet is added 70.2 g of 60% sodium hydride (1.76 mol) in mineral oil. The mineral oil is removed by washing with hexanes. Anhydrous dimethyl sulfoxide (500 ml) is added to the flask and the mixture is heated to 70° C. until evolution of hydrogen stops. The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran. (6-hydroxyhexyl) triphenylphosphonium bromide (443.4 g, 1 mol) is slurried with warm anhydrous dimethyl sulfoxide (50° C., 500 ml) and slowly added to the reaction mixture through the dropping funnel while keeping it at 25-30° C. The mixture is stirred for 30 minutes at room temperature at which time 2-undecanone (187 g, 1.1 mol) is slowly added through a dropping funnel. Reaction is slightly exothermic and cooling is needed to maintain 25-30° C. The mixture is stirred for 18 hr. and then poured into a 5 L beaker containing 1 L purified water with stirring. The oil phase (top) is allowed to separate out in a separatory funnel and the water phase is removed. The water phase is washed with hexanes (500 ml) and the organic phase is separated and combined with the oil phase from the water wash. The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140C and 1 mm Hg. Into a dried 5 L, 3 neck round bottom flask fitted with mechanical stirring, nitrogen inlet The mineral oil is removed by washing with hexanes Anhydrous dimethyl sulfoxide (500 ml) is added to the flask The reaction mixture is cooled to room temperature followed by addition of 1 L of anhydrous tetrahydrofuran slowly added to the reaction mixture through the dropping funnel at 25-30° C is slowly added through a dropping funnel Reaction cooling to maintain 25-30° C and then poured into a 5 L beaker containing 1 L purified water with stirring to separate out in a separatory funnel the water phase is removed The water phase is washed with hexanes (500 ml) the organic phase is separated wash The organic mixture is then extracted with water 3 times (500 ml each) followed by vacuum distillation to collect the clear, oily product (132 g) at 140C and 1 mm Hg