Benzenamine, 2-fluoro-4-(1-methylethoxy)-

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 5.92 g (0.035 mole) of 4-isopropoxy-2-fluoroaniline, 10.60 g (0.043 mole) of malonyldiurethane, and 41.02 g (0.500 mole) of sodium acetate was suspended in 1000 mL of water with vigorous stirring. To this suspension was added 25 mL of 12N hydrochloric acid. The reaction mixture was cooled to 10° C., and, while this temperature was maintained, a solution of 2.42 g (0.035 mole) of sodium nitrite in 25 mL of water was slowly added. The reaction mixture was allowed to warm slowly to room temperature where it was stirred under a nitrogen atmosphere for approximately 16 hours. During this period a yellow solid formed and precipitated out. The mixture was filtered, and the yellow solid was washed in succession with water and diethyl ether. After being dried, 9.20 g of 2-(4-isopropoxy-2-fluorophenyl)hydrazonomalonyldiurethane was isolated as a yellow solid. The NMR and IR spectra were consistent with the proposed structure. while this temperature was maintained to warm slowly to room temperature where it During this period a yellow solid formed precipitated out The mixture was filtered the yellow solid was washed in succession with water and diethyl ether After being dried

反应条件: temp:10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 5.92 g (0.035 mole) of 4-isopropoxy-2-fluoroaniline, 10.60 g (0.043 mole) of malonyldiurethane, and 41.02 g (0.500 mole) of sodium acetate was suspended in 1000 mL of water with vigorous stirring. To this suspension was added 25 mL of 12N hydrochloric acid. The reaction mixture was cooled to 10° C., and, while this temperature was maintained, a solution of 2.42 g (0.035 mole) of sodium nitrite in 25 mL of water was slowly added. The reaction mixture was allowed to warm slowly to room temperature where it was stirred under a nitrogen atmosphere for approximately 16 hours. During this period a yellow solid formed and precipitated out. The mixture was filtered, and the yellow solid was washed in succession with water and diethyl ether. After being dried, 9.20 g of 2-(4-isopropoxy-2-fluorophenyl)hydrazonomalonyldiurethane was isolated as a yellow solid. The NMR and IR spectra were consistent with the proposed structure. while this temperature was maintained to warm slowly to room temperature where it During this period a yellow solid formed precipitated out The mixture was filtered the yellow solid was washed in succession with water and diethyl ether After being dried

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A stirred flask containing 350 mL of acetic acid was heated to 80°-85° C. under a nitrogen atmosphere. To this flask was added 39.10 g (0.700 mole) of powdered iron, and this mixture was stirred for one hour. A solution of 4-isopropoxy-2-fluoronitrobenzene in 250 mL was added to the mixture dropwise. Upon completion of addition, the reaction mixture was heated at 80°-85° C. for one hour. After being cooled below 40° C., the mixture was filtered, and the solvent was evaporated under reduced pressure, leaving a residue. This residue was dissolved in a mixture of water and diethyl ether. The organic layer was separated and was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride. It was then dried over anhydrous magnesium sulfate, filtered through a short column of silica gel, and the solvent was evaporated under reduced pressure, leaving an impure residue which contained significant amounts of acetamide in addition to the desired product. This residue was suspended in 500 mL of 2N hydrochloric acid for one hour. The hydrochloric acid mixture was then extracted with diethyl ether, and the two phases were separated. Aqueous sodium hydroxide solution was added to the aqueous hydrochloride solution until it was basic. This basic solution was extracted with diethyl ether, and the extract was dried over anhydrous magnesium sulfate and filtered. After evaporation of the solvent under reduced pressure, the residue was recrystallized from diethyl ether/petroleum ether to yield 16.90 g of 4-isopropoxy-2-fluoroaniline as an oil which darkened on standing. The NMR spectrum was consistent with the proposed structure. was heated to 80°-85° C. under a nitrogen atmosphere Upon completion of addition the reaction mixture was heated at 80°-85° C. for one hour After being cooled below 40° C. the mixture was filtered the solvent was evaporated under reduced pressure leaving a residue The organic layer was separated was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride It was then dried over anhydrous magnesium sulfate filtered through a short column of silica gel the solvent was evaporated under reduced pressure leaving an impure residue which

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A stirred flask containing 350 mL of acetic acid was heated to 80°-85° C. under a nitrogen atmosphere. To this flask was added 39.10 g (0.700 mole) of powdered iron, and this mixture was stirred for one hour. A solution of 4-isopropoxy-2-fluoronitrobenzene in 250 mL was added to the mixture dropwise. Upon completion of addition, the reaction mixture was heated at 80°-85° C. for one hour. After being cooled below 40° C., the mixture was filtered, and the solvent was evaporated under reduced pressure, leaving a residue. This residue was dissolved in a mixture of water and diethyl ether. The organic layer was separated and was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride. It was then dried over anhydrous magnesium sulfate, filtered through a short column of silica gel, and the solvent was evaporated under reduced pressure, leaving an impure residue which contained significant amounts of acetamide in addition to the desired product. This residue was suspended in 500 mL of 2N hydrochloric acid for one hour. The hydrochloric acid mixture was then extracted with diethyl ether, and the two phases were separated. Aqueous sodium hydroxide solution was added to the aqueous hydrochloride solution until it was basic. This basic solution was extracted with diethyl ether, and the extract was dried over anhydrous magnesium sulfate and filtered. After evaporation of the solvent under reduced pressure, the residue was recrystallized from diethyl ether/petroleum ether to yield 16.90 g of 4-isopropoxy-2-fluoroaniline as an oil which darkened on standing. The NMR spectrum was consistent with the proposed structure. was heated to 80°-85° C. under a nitrogen atmosphere Upon completion of addition the reaction mixture was heated at 80°-85° C. for one hour After being cooled below 40° C. the mixture was filtered the solvent was evaporated under reduced pressure leaving a residue The organic layer was separated was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride It was then dried over anhydrous magnesium sulfate filtered through a short column of silica gel the solvent was evaporated under reduced pressure leaving an impure residue which

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Ethyl chloroformate (66 μL) is added dropwise to an ice-cold mixture of 4-methyl-5,6-dihydro-4H-1,3a,6-triaza-as-indacene-8-carboxylic acid hydrobromide (192 mg), triethylamine (0.33 mL), and N,N-dimethylformamide (5 mL). The mixture is stirred at 0° for 1 hour then at room temperature for 30 minutes. 2-Fluoro-4-isopropoxyaniline (66 mg) is added and the mixture is stirred at room temperature for 18 hours. The mixture is diluted with ethyl acetate (50 mL) then treated with water (25 mL), and extracted with ethyl acetate (3×50 mL). The combined organic layers are washed with water (2×20 mL) and brine (1×20 mL), dried over magnesium sulfate, and concentrated in vacuo. The residue is purified by preparative thin layer chromatography on silica gel, eluting with diethyl ether, to give a brown solid. This is treated with ethanol (2 mL) and saturated aqueous potassium carbonate solution (1 mL) and the mixture is heated at 60° for 30 minutes. The mixture is cooled to room temperature and diluted with water (3 mL) and extracted with ethyl acetate (3×30 mL). The combined organic layers are washed with brine (1×10 mL), dried over magnesium sulfate, and concentrated in vacuo. The oily residue is purified by preparative thin layer chromatography on silica gel, eluting with 10% methanol in dichloromethane, to give 4-methyl-5,6-dihydro-4H-1,3a,6-triaza-as-indacene-8-carboxylic acid (2-fluoro-4-isopropoxyphenyl)amide, pale yellow solid, 10 mg: LRMS calcd 368.40, found [M+H] 369.2. at room temperature for 30 minutes the mixture is stirred at room temperature for 18 hours extracted with ethyl acetate (3×50 mL) The combined organic layers are washed with water (2×20 mL) and brine (1×20 mL) dried over magnesium sulfate concentrated in vacuo The residue is purified by preparative thin layer chromatography on silica gel eluting with diethyl ether to give a brown solid the mixture is heated at 60° for 30 minutes extracted with ethyl acetate (3×30 mL) The combined organic layers are washed with brine (1×10 mL) dried over magnesium sulfate concentrated in vacuo The oily residue is purified by preparative thin layer chromatography on silica gel eluting with 10% methanol in dichloromethane

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Ethyl chloroformate (66 μL) is added dropwise to an ice-cold mixture of 4-methyl-5,6-dihydro-4H-1,3a,6-triaza-as-indacene-8-carboxylic acid hydrobromide (192 mg), triethylamine (0.33 mL), and N,N-dimethylformamide (5 mL). The mixture is stirred at 0° for 1 hour then at room temperature for 30 minutes. 2-Fluoro-4-isopropoxyaniline (66 mg) is added and the mixture is stirred at room temperature for 18 hours. The mixture is diluted with ethyl acetate (50 mL) then treated with water (25 mL), and extracted with ethyl acetate (3×50 mL). The combined organic layers are washed with water (2×20 mL) and brine (1×20 mL), dried over magnesium sulfate, and concentrated in vacuo. The residue is purified by preparative thin layer chromatography on silica gel, eluting with diethyl ether, to give a brown solid. This is treated with ethanol (2 mL) and saturated aqueous potassium carbonate solution (1 mL) and the mixture is heated at 60° for 30 minutes. The mixture is cooled to room temperature and diluted with water (3 mL) and extracted with ethyl acetate (3×30 mL). The combined organic layers are washed with brine (1×10 mL), dried over magnesium sulfate, and concentrated in vacuo. The oily residue is purified by preparative thin layer chromatography on silica gel, eluting with 10% methanol in dichloromethane, to give 4-methyl-5,6-dihydro-4H-1,3a,6-triaza-as-indacene-8-carboxylic acid (2-fluoro-4-isopropoxyphenyl)amide, pale yellow solid, 10 mg: LRMS calcd 368.40, found [M+H] 369.2. at room temperature for 30 minutes the mixture is stirred at room temperature for 18 hours extracted with ethyl acetate (3×50 mL) The combined organic layers are washed with water (2×20 mL) and brine (1×20 mL) dried over magnesium sulfate concentrated in vacuo The residue is purified by preparative thin layer chromatography on silica gel eluting with diethyl ether to give a brown solid the mixture is heated at 60° for 30 minutes extracted with ethyl acetate (3×30 mL) The combined organic layers are washed with brine (1×10 mL) dried over magnesium sulfate concentrated in vacuo The oily residue is purified by preparative thin layer chromatography on silica gel eluting with 10% methanol in dichloromethane

反应条件: temp:10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 5.92 g (0.035 mole) of 4-isopropoxy-2-fluoroaniline, 10.60 g (0.043 mole) of malonyldiurethane, and 41.02 g (0.500 mole) of sodium acetate was suspended in 1000 mL of water with vigorous stirring. To this suspension was added 25 mL of 12N hydrochloric acid. The reaction mixture was cooled to 10° C., and, while this temperature was maintained, a solution of 2.42 g (0.035 mole) of sodium nitrite in 25 mL of water was slowly added. The reaction mixture was allowed to warm slowly to room temperature where it was stirred under a nitrogen atmosphere for approximately 16 hours. During this period a yellow solid formed and precipitated out. The mixture was filtered, and the yellow solid was washed in succession with water and diethyl ether. After being dried, 9.20 g of 2-(4-isopropoxy-2-fluorophenyl)hydrazonomalonyldiurethane was isolated as a yellow solid. The NMR and IR spectra were consistent with the proposed structure. while this temperature was maintained to warm slowly to room temperature where it During this period a yellow solid formed precipitated out The mixture was filtered the yellow solid was washed in succession with water and diethyl ether After being dried

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A stirred flask containing 350 mL of acetic acid was heated to 80°-85° C. under a nitrogen atmosphere. To this flask was added 39.10 g (0.700 mole) of powdered iron, and this mixture was stirred for one hour. A solution of 4-isopropoxy-2-fluoronitrobenzene in 250 mL was added to the mixture dropwise. Upon completion of addition, the reaction mixture was heated at 80°-85° C. for one hour. After being cooled below 40° C., the mixture was filtered, and the solvent was evaporated under reduced pressure, leaving a residue. This residue was dissolved in a mixture of water and diethyl ether. The organic layer was separated and was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride. It was then dried over anhydrous magnesium sulfate, filtered through a short column of silica gel, and the solvent was evaporated under reduced pressure, leaving an impure residue which contained significant amounts of acetamide in addition to the desired product. This residue was suspended in 500 mL of 2N hydrochloric acid for one hour. The hydrochloric acid mixture was then extracted with diethyl ether, and the two phases were separated. Aqueous sodium hydroxide solution was added to the aqueous hydrochloride solution until it was basic. This basic solution was extracted with diethyl ether, and the extract was dried over anhydrous magnesium sulfate and filtered. After evaporation of the solvent under reduced pressure, the residue was recrystallized from diethyl ether/petroleum ether to yield 16.90 g of 4-isopropoxy-2-fluoroaniline as an oil, which darkened on standing. The NMR spectrum was consistent with the proposed structure. was heated to 80°-85° C. under a nitrogen atmosphere Upon completion of addition the reaction mixture was heated at 80°-85° C. for one hour After being cooled below 40° C. the mixture was filtered the solvent was evaporated under reduced pressure leaving a residue The organic layer was separated was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride It was then dried over anhydrous magnesium sulfate filtered through a short column of silica gel the solvent was evaporated under reduced pressure leaving an impure residue which

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Ethyl chloroformate (66 μL) is added dropwise to an ice-cold mixture of 4-methyl-5,6-dihydro-4H-1,3a,6-triaza-as-indacene-8-carboxylic acid hydrobromide (192 mg), triethylamine (0.33 mL), and N,N-dimethylformamide (5 mL). The mixture is stirred at 0° for 1 hour then at room temperature for 30 minutes. 2-Fluoro-4-isopropoxyaniline (66 mg) is added and the mixture is stirred at room temperature for 18 hours. The mixture is diluted with ethyl acetate (50 mL) then treated with water (25 mL), and extracted with ethyl acetate (3×50 mL). The combined organic layers are washed with water (2×20 mL) and brine (1×20 mL), dried over magnesium sulfate, and concentrated in vacuo. The residue is purified by preparative thin layer chromatography on silica gel, eluting with diethyl ether, to give a brown solid. This is treated with ethanol (2 mL) and saturated aqueous potassium carbonate solution (1 mL) and the mixture is heated at 600 for 30 minutes. The mixture is cooled to room temperature and diluted with water (3 mL) and extracted with ethyl acetate (3×30 mL). The combined organic layers are washed with brine (1×10 mL), dried over magnesium sulfate, and concentrated in vacuo. The oily residue is purified by preparative thin layer chromatography on silica gel, eluting with 10% methanol in dichloromethane, to give 4-methyl-5,6-dihydro-4H-1,3a,6-triaza-as-indacene-8-carboxylic acid (2-fluoro-4-isopropoxyphenyl)amide, pale yellow solid, 10 mg: LRMS calcd 368.40, found [M+H] 369.2. at room temperature for 30 minutes the mixture is stirred at room temperature for 18 hours extracted with ethyl acetate (3×50 mL) The combined organic layers are washed with water (2×20 mL) and brine (1×20 mL) dried over magnesium sulfate concentrated in vacuo The residue is purified by preparative thin layer chromatography on silica gel eluting with diethyl ether to give a brown solid the mixture is heated at 600 for 30 minutes extracted with ethyl acetate (3×30 mL) The combined organic layers are washed with brine (1×10 mL) dried over magnesium sulfate concentrated in vacuo The oily residue is purified by preparative thin layer chromatography on silica gel eluting with 10% methanol in dichloromethane

反应条件: temp:10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A mixture of 5.92 g (0.035 mole) of 4-isopropoxy-2-fluoroaniline, 10.60 g (0.043 mole) of malonyldiurethane, and 41.02 g (0.500 mole) of sodium acetate was suspended in 1000 mL of water with vigorous stirring. To this suspension was added 25 mL of 12N hydrochloric acid. The reaction mixture was cooled to 10° C., and, while this temperature was maintained, a solution of 2.42 g (0.035 mole) of sodium nitrite in 25 mL of water was slowly added. The reaction mixture was allowed to warm slowly to room temperature where it was stirred under a nitrogen atmosphere for approximately 16 hours. During this period a yellow solid formed and precipitated out. The mixture was filtered, and the yellow solid was washed in succession with water and diethyl ether. After being dried, 9.20 g of 2-(4-isopropoxy-2-fluorophenyl)hydrazonomalonyldiurethane was isolated as a yellow solid. The NMR and IR spectra were consistent with the proposed structure. while this temperature was maintained to warm slowly to room temperature where it During this period a yellow solid formed precipitated out The mixture was filtered the yellow solid was washed in succession with water and diethyl ether After being dried

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A stirred flask containing 350 mL of acetic acid was heated to 80°-85° C. under a nitrogen atmosphere. To this flask was added 39.10 g (0.700 mole) of powdered iron, and this mixture was stirred for one hour. A solution of 4-isopropoxy-2-fluoronitrobenzene in 250 mL was added to the mixture dropwise. Upon completion of addition, the reaction mixture was heated at 80°-85° C. for one hour. After being cooled below 40° C., the mixture was filtered, and the solvent was evaporated under reduced pressure, leaving a residue. This residue was dissolved in a mixture of water and diethyl ether. The organic layer was separated and was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride. It was then dried over anhydrous magnesium sulfate, filtered through a short column of silica gel, and the solvent was evaporated under reduced pressure, leaving an impure residue which contained significant amounts of acetamide in addition to the desired product. This residue was suspended in 500 mL of 2N hydrochloric acid for one hour. The hydrochloric acid mixture was then extracted with diethyl ether, and the two phases were separated. Aqueous sodium hydroxide solution was added to the aqueous hydrochloride solution until it was basic. This basic solution was extracted with diethyl ether, and the extract was dried over anhydrous magnesium sulfate and filtered. After evaporation of the solvent under reduced pressure, the residue was recrystallized from diethyl ether/petroleum ether to yield 16.90 g of 4-isopropoxy-2-fluoroaniline as an oil which darkened on standing. The NMR spectrum was consistent with the proposed structure. was heated to 80°-85° C. under a nitrogen atmosphere Upon completion of addition the reaction mixture was heated at 80°-85° C. for one hour After being cooled below 40° C. the mixture was filtered the solvent was evaporated under reduced pressure leaving a residue The organic layer was separated was washed in succession with saturated aqueous solutions of sodium bicarbonate and sodium chloride It was then dried over anhydrous magnesium sulfate filtered through a short column of silica gel the solvent was evaporated under reduced pressure leaving an impure residue which