4-(溴甲基)哌啶甲酸苄酯

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of N,N′-di-tert-butoxycarbonyl-7-hydroxy-1,2,3,4-tetrahydroisoquinoline-2-carboxamidine (50 mg) and 4-bromomethylpiperidine-1-carboxylic acid benzyl ester (120 mg) in dimethyl sulfoxide (1 ml) was added 4N aqueous sodium hydroxide solution (0.13 ml), and the mixture was stirred at room temperature for 17 hours. After completion of the reaction, water was added, and the mixture was extracted with ethyl acetate and washed successively with water and saturated brine. The organic layer was dried over anhydrous sodium sulfate, and the solvent was evaporated. The obtained residue was purified by silica gel column chromatography (hexane:acetone=5:1) and dried under reduced pressure to give the title compound (55 mg). was added the mixture was extracted with ethyl acetate washed successively with water and saturated brine The organic layer was dried over anhydrous sodium sulfate the solvent was evaporated The obtained residue was purified by silica gel column chromatography (hexane:acetone=5:1) dried under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of 4-hydroxymethylpiperidine-1-carboxylic acid benzyl ester (1.11 g), carbon tetrabromide (1.77 g) in methylene chloride (11 ml) was added triphenylphosphine (1.4 g) with ice-cooling, and the mixture was stirred at room temperature for 5 hours. After completion of the reaction, the solvent was evaporated and the obtained residue was purified by silica gel column chromatography (hexane:acetone=10:1) and dried under reduced pressure to give the title compound (1.25 g). cooling After completion of the reaction the solvent was evaporated the obtained residue was purified by silica gel column chromatography (hexane:acetone=10:1) dried under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The title compound was prepared by alkylation of 2-(2,6-difluorophenyl)-5-(4-hydroxyphenyl)oxazole-4-carboxamide with benzyl 4-(bromomethyl)piperidine-1-carboxylate according to the procedure described in example S-1, step b, followed by subsequent deprotection using the H-cube hydrogenation system (full H2 mode, 10% Pd\C catalyst, 1 ml/min, 20° C., 0.05M in MeOH). 1H NMR (DMSO) δ 1.30-1.50 (2H, m), 1.85 (2H, d), 1.90-2.10 (1H, m), 2.71-2.81 (2H, m), 3.21 (2H, d), 3.92 (2H, d), 7.05-7.15 (2H, m), 7.35-7.45 (2H, m), 7.60-7.80 (3H, m), 8.21-8.30 (2H, m). LCMS (2) 3.13 min; m/z (ES+) 414.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Prepared similarly to Intermediate 31 from 2-{[(1S)-1-methylbutyl]oxy}-8-(methyloxy)-9H-purin-6-amine trifluoroacetate salt and phenylmethyl 4-(bromomethyl)-1-piperidinecarboxylate.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Prepared similarly to Intermediate 31 from 2-{[(1S)-1-methylbutyl]oxy}-8-(methyloxy)-9H-purin-6-amine trifluoroacetate salt and phenylmethyl 4-(bromomethyl)-1-piperidinecarboxylate.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Prepared similarly to Intermediate 31 from 2-(butyloxy)-8-(methyloxy)-9H-purin-6-amine trifluoroacetate and phenylmethyl 4-(bromomethyl)-1-piperidinecarboxylate. LCMS (System B): tRET=2.70 min; MH+ 469 =2.70 min

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Prepared similarly to Intermediate 31 from 2-(butyloxy)-8-(methyloxy)-9H-purin-6-amine trifluoroacetate and phenylmethyl 4-(bromomethyl)-1-piperidinecarboxylate. LCMS (System B): tRET=2.70 min; MH+ 469 =2.70 min

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The title compound was prepared by alkylation of 2-(2,6-difluorophenyl)-5-(4-hydroxyphenyl)oxazole-4-carboxamide with benzyl 4-(bromomethyl)piperidine-1-carboxylate according to the procedure described in example S-1, step b, followed by subsequent deprotection using the H-cube hydrogenation system (full H2 mode, 10% Pd\C catalyst, 1 ml/min, 20° C., 0.05M in MeOH). NMR (DMSO) δ 1.30-1.50 (2H, m), 1.85 (2H, d), 1.90-2.10 (1H, m), 2.71-2.81 (2H, m), 3.21 (2H, d), 3.92 (2H, d), 7.05-7.15 (2H, m), 7.35-7.45 (2H, m), 7.60-7.80 (3H, m), 8.21-8.30 (2H, m). LCMS (2) 3.13 min; m/z (ES+) 414.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of trans-2-phenylcyclopropanamine hydrochloride (1.087 g, 6.41 mmol) in N,N-dimethylformamide (DMF) (30 mL) was added potassium carbonate (1.771 g, 12.81 mmol) followed by benzyl 4-(bromomethyl)piperidine-1-carboxylate (1 g, 3.20 mmol). The reaction mixture was refluxed overnight. Water (80 mL) was added followed by 80 mL of ethyl acetate. The organic layer was separated, washed with brine, dried over MgSO4, filtered and evaporated. The oil was purified via silica gel column (DCM to 100% EtOAc). The fractions were collected and evaporated. The oil was further purified on preparative HPLC (5 to 70% AcCN: H2O gradient with 0.1% formic acid modifier). The fractions were collected. The combined fractions were neutralized with aq. NH4OH, concentrated and extracted with ethyl acetate. The organic layer was washed with brine, dried over MgSO4 and evaporated. Benzyl 4-(((trans-2-phenylcyclopropyl)amino)methyl)piperidine-1-carboxylate (150 mg, 0.391 mmol, 12.21% yield) was isolated as yellow liquid. 1H NMR (400 MHz, METHANOL-d4) 67.28-7.41 (m, 5H), 7.18-7.27 (m, 2H), 7.09-7.16 (m, 1H), 7.03-7.09 (m, 2H), 5.12 (s, 2H), 4.00-4.29 (m, 2H), 2.67-2.97 (m, 2H), 2.61 (d, J=6.82 Hz, 2H), 2.26-2.36 (m, 1H), 1.92 (ddd, J=3.28, 5.87, 9.28 Hz, 1H), 1.64-1.84 (m, 3H), 0.91-1.24 (m, 4H); LC-MS Rt=0.83 min; MS (ESI): 365.5 [M+H]+. The reaction mixture was refluxed overnight The organic layer was separated washed with brine dried over MgSO4 filtered evaporated The oil was purified via silica gel column (DCM to 100% EtOAc) The fractions were collected evaporated The oil was further purified on preparative HPLC (5 to 70% AcCN: H2O gradient with 0.1% formic acid modifier) The fractions were collected concentrated extracted with ethyl acetate The organic layer was washed with brine dried over MgSO4 evaporated

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of trans-2-phenylcyclopropanamine hydrochloride (1.087 g, 6.41 mmol) in N,N-dimethylformamide (DMF) (30 mL) was added potassium carbonate (1.771 g, 12.81 mmol) followed by benzyl 4-(bromomethyl)piperidine-1-carboxylate (1 g, 3.20 mmol). The reaction mixture was refluxed overnight. Water (80 mL) was added followed by 80 mL of ethyl acetate. The organic layer was separated, washed with brine, dried over MgSO4, filtered and evaporated. The oil was purified via silica gel column (DCM to 100% EtOAc). The fractions were collected and evaporated. The oil was further purified on preparative HPLC (5 to 70% AcCN: H2O gradient with 0.1% formic acid modifier). The fractions were collected. The combined fractions were neutralized with aq. NH4OH, concentrated and extracted with ethyl acetate. The organic layer was washed with brine, dried over MgSO4 and evaporated. Benzyl 4-(((trans-2-phenylcyclopropyl)amino)methyl)piperidine-1-carboxylate (150 mg, 0.391 mmol, 12.21% yield) was isolated as yellow liquid. 1H NMR (400 MHz, METHANOL-d4) δ 7.28-7.41 (m, 5H), 7.18-7.27 (m, 2H), 7.09-7.16 (m, 1H), 7.03-7.09 (m, 2H), 5.12 (s, 2H), 4.00-4.29 (m, 2H), 2.67-2.97 (m, 2H), 2.61 (d, J=6.82 Hz, 2H), 2.26-2.36 (m, 1H), 1.92 (ddd, J=3.28, 5.87, 9.28 Hz, 1H), 1.64-1.84 (m, 3H), 0.91-1.24 (m, 4H); LC-MS Rt=0.83 min; MS (ESI): 365.5 [M+H]+. The reaction mixture was refluxed overnight The organic layer was separated washed with brine dried over MgSO4 filtered evaporated The oil was purified via silica gel column (DCM to 100% EtOAc) The fractions were collected evaporated The oil was further purified on preparative HPLC (5 to 70% AcCN: H2O gradient with 0.1% formic acid modifier) The fractions were collected concentrated extracted with ethyl acetate The organic layer was washed with brine dried over MgSO4 evaporated

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: To a solution of trans-2-phenylcyclopropanamine hydrochloride (1.087 g, 6.41 mmol) in N,N-dimethylformamide (DMF) (30 mL) was added potassium carbonate (1.771 g, 12.81 mmol) followed by benzyl 4-(bromomethyl)piperidine-1-carboxylate (1 g, 3.20 mmol). The reaction mixture was refluxed overnight. Water (80 mL) was added followed by 80 mL of ethyl acetate. The organic layer was separated, washed with brine, dried over MgSO4, filtered and evaporated. The oil was purified via silica gel column (DCM to 100% EtOAc). The fractions were collected and evaporated. The oil was further purified on preparative HPLC (5 to 70% AcCN: H2O gradient with 0.1% formic acid modifier). The fractions were collected. The combined fractions were neutralized with aq. NH4OH, concentrated and extracted with ethyl acetate. The organic layer was washed with brine, dried over MgSO4 and evaporated. Benzyl 4-(((trans-2-phenylcyclopropyl)amino)methyl)piperidine-1-carboxylate (150 mg, 0.391 mmol, 12.21% yield) was isolated as yellow liquid. 1H NMR (400 MHz, METHANOL-d4) δ 7.28-7.41 (m, 5H), 7.18-7.27 (m, 2H), 7.09-7.16 (m, 1H), 7.03-7.09 (m, 2H), 5.12 (s, 2H), 4.00-4.29 (m, 2H), 2.67-2.97 (m, 2H), 2.61 (d, J=6.82 Hz, 2H), 2.26-2.36 (m, 1H), 1.92 (ddd, J=3.28, 5.87, 9.28 Hz, 1H), 1.64-1.84 (m, 3H), 0.91-1.24 (m, 4H); LC-MS Rt=0.83 min; MS (ESI): 365.5 [M+H]+. The reaction mixture was refluxed overnight The organic layer was separated washed with brine dried over MgSO4 filtered evaporated The oil was purified via silica gel column (DCM to 100% EtOAc) The fractions were collected evaporated The oil was further purified on preparative HPLC (5 to 70% AcCN: H2O gradient with 0.1% formic acid modifier) The fractions were collected concentrated extracted with ethyl acetate The organic layer was washed with brine dried over MgSO4 evaporated