鲁拉西酮杂质16

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a typical reaction 1,2-dimethylenecyclohexane (0.239 g, 2.21 mmol) was added via a disposable syringe to the highly reactive magnesium (3.53 mmol) in THF (20 mL). After being stirred at room temperature for 4 hours, the reaction mixture was allowed to stand until the solution became transparent (approximately 2 hours). The yellowish gold THF solution of the complex was then separated from the excess magnesium by cannulating the solution to another flask under argon. The THF solution of newly formed magnesium complex of 1,2-dimethylenecyclohexane was cooled to -78° C. using a dry ice/acetone bath, and acetone (0.122 g, 2.10 mmol) was added via a disposable syringe. The mixture was stirred at -78° C. for 10 minutes, then gradually warmed to 0° C. Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C., and another 10 minutes at room temperature. An aqueous solution of 1.5N HCl (10 mL) was added at 0° C. The reaction mixture was slightly heated at 40° C. for 1 hour. After cooling to room temperature, the mixture was extracted with diethyl ether (3×20 mL). The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) and dried over anhydrous MgSO4. Removal of solvents and flash column chromatography gave 4,4-dimethyl-6-methylene-3-oxaspiro[4.5]decan-2-one (0.279 g) in 68% yield. The following scheme illustrates this route for spiro γ-lactone synthesis. ##STR29## (approximately 2 hours) The yellowish gold THF solution of the complex was then separated from the excess magnesium The THF solution of newly formed magnesium complex of 1,2-dimethylenecyclohexane was cooled to -78° C. The mixture was stirred at -78° C. for 10 minutes gradually warmed to 0° C Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C. another 10 minutes at room temperature An aqueous solution of 1.5N HCl (10 mL) was added at 0° C The reaction mixture was slightly heated at 40° C. for 1 hour After cooling to room temperature the mixture was extracted with diethyl ether (3×20 mL) The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) dried over anhydrous MgSO4 Removal of solvents and flash column chromatography

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a typical reaction 1,2-dimethylenecyclohexane (0.239 g, 2.21 mmol) was added via a disposable syringe to the highly reactive magnesium (3.53 mmol) in THF (20 mL). After being stirred at room temperature for 4 hours, the reaction mixture was allowed to stand until the solution became transparent (approximately 2 hours). The yellowish gold THF solution of the complex was then separated from the excess magnesium by cannulating the solution to another flask under argon. The THF solution of newly formed magnesium complex of 1,2-dimethylenecyclohexane was cooled to -78° C. using a dry ice/acetone bath, and acetone (0.122 g, 2.10 mmol) was added via a disposable syringe. The mixture was stirred at -78° C. for 10 minutes, then gradually warmed to 0° C. Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C., and another 10 minutes at room temperature. An aqueous solution of 1.5N HCl (10 mL) was added at 0° C. The reaction mixture was slightly heated at 40° C. for 1 hour. After cooling to room temperature, the mixture was extracted with diethyl ether (3×20 mL). The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) and dried over anhydrous MgSO4. Removal of solvents and flash column chromatography gave 4,4-dimethyl-6-methylene-3-oxaspiro[4.5]decan-2-one (0.279 g) in 68% yield. The following scheme illustrates this route for spiro γ-lactone synthesis. ##STR29## (approximately 2 hours) The yellowish gold THF solution of the complex was then separated from the excess magnesium The THF solution of newly formed magnesium complex of 1,2-dimethylenecyclohexane was cooled to -78° C. The mixture was stirred at -78° C. for 10 minutes gradually warmed to 0° C Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C. another 10 minutes at room temperature An aqueous solution of 1.5N HCl (10 mL) was added at 0° C The reaction mixture was slightly heated at 40° C. for 1 hour After cooling to room temperature the mixture was extracted with diethyl ether (3×20 mL) The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) dried over anhydrous MgSO4 Removal of solvents and flash column chromatography

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a typical reaction 1,2-dimethylenecyclohexane (0.239 g, 2.21 mmol) is added via a disposable syringe to the highly reactive calcium (3.53 mmol) in THF (20 mL). After being stirred at room temperature for several hours, the reaction mixture is allowed to stand until the solution becomes transparent. The THF solution of newly formed calcium complex of 1,2-dimethylenecyclohexane is cooled to -78° C. using a dry ice/acetone bath, and acetone (0.122 g, 2.10 mmol) is added via a disposable syringe. The mixture is stirred at -78° C., then gradually warmed to 0° C. Carbon dioxide is then bubbled through the reaction mixture at 0° C., and then at room temperature. An aqueous solution of 1.5N HCl (10 mL) is added at 0° C. The reaction mixture is heated slightly to 40° C. After cooling to room temperature, the mixture is extracted with diethyl ether (3×20 mL). The combined organic phases are washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) and dried over anhydrous MgSO4. Removal of solvents and flash column chromatography gives 4,4-dimethyl-6-methylene-3-oxaspiro[4.5]decan-2-one. See Table VI for representative examples of compounds that can be made by this method. The mixture is stirred at -78° C. gradually warmed to 0° C Carbon dioxide is then bubbled through the reaction mixture at 0° C. at room temperature An aqueous solution of 1.5N HCl (10 mL) is added at 0° C The reaction mixture is heated slightly to 40° C After cooling to room temperature the mixture is extracted with diethyl ether (3×20 mL) The combined organic phases are washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) dried over anhydrous MgSO4 Removal of solvents and flash column chromatography

反应条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a typical reaction 1,2-dimethylenecyclohexane (0.239 g, 2.21 mmol) was added via a disposable syringe to the highly reactive magnesium (3.53 mmol) in THF (20 mL). After being stiffed at room temperature for 4 hours, the reaction mixture was allowed to stand until the solution became transparent (approximately 2 hours). The yellowish gold THF solution of the complex was then separated from the excess magnesium by cannulating the solution to another flask under argon. The THF solution of newly formed magnesium complex of 1,2-dimethylenecyclohexane was cooled to -78° C. using a dry ice/acetone bath, and acetone (0.122 g, 2.10 mmol) was added via a disposable syringe. The mixture was stirred at -78° C. for 10 minutes, then gradually warmed to 0° C. Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C., and another 10 minutes at room temperature. An aqueous solution of 1.5 N HCl (10 mL) was added at 0° C. The reaction mixture was slightly heated at 40° C. for 1 hour. After cooling to room temperature, the mixture was extracted with diethyl ether (3×20 mL). The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) and dried over anhydrous MgSO4. Removal of solvents and flash column chromatography gave 4,4-dimethyl-6-methylene-3-oxaspiro[4.5]decan-2-one (0.279 g) in 68% yield. The following scheme illustrates this route for spiro γ-lactone synthesis. ##STR35## (approximately 2 hours) The yellowish gold THF solution of the complex was then separated from the excess magnesium gradually warmed to 0° C Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C. another 10 minutes at room temperature An aqueous solution of 1.5 N HCl (10 mL) was added at 0° C The reaction mixture was slightly heated at 40° C. for 1 hour After cooling to room temperature the mixture was extracted with diethyl ether (3×20 mL) The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) dried over anhydrous MgSO4 Removal of solvents and flash column chromatography

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: In a typical reaction 1,2-dimethylenecyclohexane (0.239 g, 2.21 mmol) was added via a disposable syringe to the highly reactive magnesium (3.53 mmol) in THF (20 mL). After being stirred at room temperature for 4 hours, the reaction mixture was allowed to stand until the solution became transparent (approximately 2 hours). The yellowish gold THF solution of the complex was then separated from the excess magnesium by cannulating the solution to another flask under argon. The THF solution of newly formed magnesium complex of 1,2-dimethylenecyclohexane was cooled to -78° C. using a dry ice/acetone bath, and acetone (0.122 g, 2.10 mmol) was added via a disposable syringe. The mixture was stirred at -78° C. for 10 minutes, then gradually warmed to 0° C. Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C., and another 10 minutes at room temperature. An aqueous solution of 1.5N HCl (10 mL) was added at 0° C. The reaction mixture was slightly heated at 40° C. for 1 hour. After cooling to room temperature, the mixture was extracted with diethyl ether (3×20 mL). The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) and dried over anhydrous MgSO4. Removal of solvents and flash column chromatography gave 4,4-dimethyl-6-methylene-3-oxaspiro[4.5]decan-2-one (0.279 g) in 68% yield. The following scheme illustrates this route for spiro γ-lactone synthesis. ##STR29## (approximately 2 hours) The yellowish gold THF solution of the complex was then separated from the excess magnesium The THF solution of newly formed magnesium complex of 1,2-dimethylenecyclohexane was cooled to -78° C. The mixture was stirred at -78° C. for 10 minutes gradually warmed to 0° C Carbon dioxide was then bubbled through the reaction mixture for 10 minutes at 0° C. another 10 minutes at room temperature An aqueous solution of 1.5N HCl (10 mL) was added at 0° C The reaction mixture was slightly heated at 40° C. for 1 hour After cooling to room temperature the mixture was extracted with diethyl ether (3×20 mL) The combined organic phases were washed with saturated aqueous NaHCO3 (2×20 mL) and brine (20 mL) dried over anhydrous MgSO4 Removal of solvents and flash column chromatography