3-二甲胺基乙基硅烷

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:240.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The reaction was carried out as in Example 3; however, the acetylene pressure was increased to 150 psig and the reaction temperature was maintained at 240° C. Vinyltris(dimethylamino)silane was the single major product at a yield of 85% theoretical. Ethyltris(dimethylamino)silane and 1,2-bis(trisdimethylamino)silylethane were also formed, each in approximately a 2 to 3% yield. Vinyltris(dimethylamino)silane was also formed in approximately 10% yield.

反应条件: temp:240.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The reaction was carried out as in Example 3; however, the acetylene pressure was increased to 150 psig and the reaction temperature was maintained at 240° C. Vinyltris(dimethylamino)silane was the single major product at a yield of 85% theoretical. Ethyltris(dimethylamino)silane and 1,2-bis(trisdimethylamino)silylethane were also formed, each in approximately a 2 to 3% yield. Vinyltris(dimethylamino)silane was also formed in approximately 10% yield.

反应条件: temp:250.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A two liter stirred batch reactor was purged with nitrogen gas and thereafter charged with 840 g (5.22 moles) of tris(dimethylamino)silane and 5 ppm hexachloroplatinic acid. The reactor was then pressurized to approximately 5 psig with nitrogen gas and heated to approximately 250° C. The acetylene inlet feed was started and maintained at 100 psig. The reaction temperature was maintained at 250° C. After four hours the acetylene flow was stopped, the reaction mix cooled and the reaction products analyzed. Vinyltris(dimethyl)amino)silane was the single major product at 90% of theoretical. Ethyltris(dimethylamino)silane and 1,2-bis(trisdimethylamino)silylethane by-products were formed in amounts less than 0.5% each. Vinyltris(dimethylamino)silane polymer was also formed in an amount of 7-8%. was purged with nitrogen gas maintained at 100 psig The reaction temperature was maintained at 250° C the reaction mix cooled

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:240.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: The reaction was carried out as in Example 3; however, the acetylene pressure was increased to 150 psig and the reaction temperature was maintained at 240° C. Vinyltris(dimethylamino)silane was the single major product at a yield of 85% theoretical. Ethyltris(dimethylamino)silane and 1,2-bis(trisdimethylamino)silylethane were also formed, each in approximately a 2 to 3% yield. Vinyltris(dimethylamino)silane was also formed in approximately 10% yield.

反应条件: temp:250.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A two liter stirred batch reactor was purged with nitrogen gas and thereafter charged with 840 g (5.22 moles) of tris(dimethylamino)silane and 5 ppm hexachloroplatinic acid. The reactor was then pressurized to approximately 5 psig with nitrogen gas and heated to approximately 250° C. The acetylene inlet feed was started and maintained at 100 psig. The reaction temperature was maintained at 250° C. After four hours the acetylene flow was stopped, the reaction mix cooled and the reaction products analyzed. Vinyltris(dimethyl)amino)silane was the single major product at 90% of theoretical. Ethyltris(dimethylamino)silane and 1,2-bis(trisdimethylamino)silylethane by-products were formed in amounts less than 0.5% each. Vinyltris(dimethylamino)silane polymer was also formed in an amount of 7-8%. was purged with nitrogen gas maintained at 100 psig The reaction temperature was maintained at 250° C the reaction mix cooled

反应条件: temp:0.00; pressure:0.00; stir: