2-(4-溴丁氧基)四氢-2H-吡喃

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 16.0 g (105.0 mmols) of 4-bromobutanol was dissolved in 140 ml of chloroform, and a solution prepared by dissolving 13.9 ml (1.5-fold equivalent weight) of 3,4-dihydro-2H-pyran in 40 ml of chloroform was dropwise added thereto at 0° C. in an atmosphere of argon. The solution obtained was stirred for 4 hours while keeping it at 0° C., followed by addition of an aqueous sodium hydrogencarbonate, and the resulting solution was extracted with chloroform (100 ml×2). The organic layer obtained was dried with anhydrous sodium sulfate, and thereafter concentrated under reduced pressure to obtain 24.0 g of 4-(tetrahydropyran-2-yl)oxybutyl bromide (yield: 96%). a solution prepared was dropwise added at 0° C. The solution obtained at 0° C. the resulting solution was extracted with chloroform (100 ml×2) The organic layer obtained was dried with anhydrous sodium sulfate concentrated under reduced pressure

反应条件: temp:0.00; pressure:0.00; stir:

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Alkylation of 12-(tert-butyldiphenylsilyloxy)dodec-1-yne with 2-(4-bromobutoxy)tetrahydropyran as described above gave tert-butyldiphenyl-[16-(tetrahydropyran-2-yloxy)hexadec-11-ynyloxy]silane (66%) as a colorless oil which was used in the next reaction without further purification. TLC: 10% EtOAc/hexane, Rf≈0.5.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Oct-1,7-diyne (9.0 g, 84.9 mmol; G F Smith) was alkylated with 2-(4-bromobutoxy)-tetrahydropyran (15 g, 63.68 mmol) as described above for the synthesis of 2-(pentadeca-5,14-diynyloxy)tetrahydropyran to give 2-(dodeca-5,11-diynyloxy)tetrahydropyran (10.85 g, 65%) as a colorless oil. TLC: 10% EtOAc/hexanes, Rf≈0.6; 1H NMR (400 MHz, CDCl3) δ 4.57 (t, J=2.5 Hz, 1H), 3.82-3.87 (m, 1H), 3.70-3.77 (m, 1H), 3.46-3.51 (m, 1H), 3.36-3.42 (m, 1H), 2.14-2.20 (m, 6H), 1.93 (t, 1H, J=2.5 Hz), 1.46-1.72 (m, 14 H).

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Oct-1,7-diyne (9.0 g, 84.9 mmol; G F Smith) was alkylated with 2-(4-bromobutoxy)-tetrahydropyran (15 g, 63.68 mmol) as described above for the synthesis of 2-(pentadeca-5,14-diynyloxy)tetrahydropyran to give 2-(dodeca-5,11-diynyloxy)tetrahydropyran (10.85 g, 65%) as a colorless oil. TLC: 10% EtOAc/hexanes, Rf≈0.6; 1H NMR (400 MHz, CDCl3) δ 4.57 (t, J=2.5 Hz, 1H), 3.82-3.87 (m, 1H), 3.70-3.77 (m, 1H), 3.46-3.51 (m, 1H), 3.36-3.42 (m, 1H), 2.14-2.20 (m, 6H), 1.93 (t, 1H, J=2.5 Hz), 1.46-1.72 (m, 14 H).

反应条件: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: n-BuLi (4.86 mL of 2.5 M in hexanes, 12.16 mmol) was added dropwise to a −78° C. solution of undec-1,10-diyne (2.0 g, 13.51 mmol) in dry tetrahydrofuran/HMPA (105 mL, 6:1) under an argon atmosphere. After 30 min, the reaction mixture was warmed to −10° C. over 2 h and maintained at this temperature for 20 min, then re-cooled to −75° C. To this was added a solution of 2-(4-bromobutoxy)-tetrahydropyran (2.4 g, 10.14 mmol) in dry THF (15 mL). The resulting mixture was warmed to room temperature over 3 h, maintained at this temperature for 12 h, then quenched with sat. aq. NH4Cl (25 mL). After 20 min, the mixture was extracted with ether (2×125 mL). The combined ethereal extracts were washed with water (2×100 mL), brine (100 mL), dried over Na2SO4 and concentrated under reduced pressure. The residue was purified by SiO2 column chromatography using 5% EtOAc/hexanes as eluent to give 2-(pentadeca-5,14-diynyloxy)tetrahydropyran (1.97 g, 64%) as a colorless oil. TLC: 10% EtOAc/hexanes, Rf≈0.6; 1H NMR (400 MHz, CDCl3) δ 4.58 (t, J=2.5 Hz, 1H), 3.82-3.89 (m, 1H), 3.71-3.78 (m, 1H), 3.43-3.53 (m, 1H), 3.36-3.47 (m, 1H), 2.01-2.20 (m, 6H), 1.93 (t, J=2.5 Hz, 1H), 1.27-1.81 (m, 20H). Lit. ref: F. Slowinski; C. Aubert; M. Malacria Eur. J. Org. Chem. 2001: 3491. maintained at this temperature for 20 min re-cooled to −75° C The resulting mixture was warmed to room temperature over 3 h maintained at this temperature for 12 h quenched with sat. aq. NH4Cl (25 mL) After 20 min the mixture was extracted with ether (2×125 mL) The combined ethereal extracts were washed with water (2×100 mL), brine (100 mL) dried over Na2SO4 concentrated under reduced pressure The residue was purified by SiO2 column chromatography

反应条件: temp:-10.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: n-BuLi (4.86 mL of 2.5 M in hexanes, 12.16 mmol) was added dropwise to a −78° C. solution of undec-1,10-diyne (2.0 g, 13.51 mmol) in dry tetrahydrofuran/HMPA (105 mL, 6:1) under an argon atmosphere. After 30 min, the reaction mixture was warmed to −10° C. over 2 h and maintained at this temperature for 20 min, then re-cooled to −75° C. To this was added a solution of 2-(4-bromobutoxy)-tetrahydropyran (2.4 g, 10.14 mmol) in dry THF (15 mL). The resulting mixture was warmed to room temperature over 3 h, maintained at this temperature for 12 h, then quenched with sat. aq. NH4Cl (25 mL). After 20 min, the mixture was extracted with ether (2×125 mL). The combined ethereal extracts were washed with water (2×100 mL), brine (100 mL), dried over Na2SO4 and concentrated under reduced pressure. The residue was purified by SiO2 column chromatography using 5% EtOAc/hexanes as eluent to give 2-(pentadeca-5,14-diynyloxy)tetrahydropyran (1.97 g, 64%) as a colorless oil. TLC: 10% EtOAc/hexanes, Rf≈0.6; 1H NMR (400 MHz, CDCl3) δ 4.58 (t, J=2.5 Hz, 1H), 3.82-3.89 (m, 1H), 3.71-3.78 (m, 1H), 3.43-3.53 (m, 1H), 3.36-3.47 (m, 1H), 2.01-2.20 (m, 6H), 1.93 (t, J=2.5 Hz, 1H), 1.27-1.81 (m, 20H). Lit. ref: F. Slowinski; C. Aubert; M. Malacria Eur. J. Org. Chem. 2001: 3491. maintained at this temperature for 20 min re-cooled to −75° C The resulting mixture was warmed to room temperature over 3 h maintained at this temperature for 12 h quenched with sat. aq. NH4Cl (25 mL) After 20 min the mixture was extracted with ether (2×125 mL) The combined ethereal extracts were washed with water (2×100 mL), brine (100 mL) dried over Na2SO4 concentrated under reduced pressure The residue was purified by SiO2 column chromatography

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 3,4-Dihydro-2H-pyran (8.0 g, 95.36 mmol) was added to a 0° C. solution of 4-bromobutan-1-ol (12.0 g, 79.47 mmol) in dichloromethane (150 mL) followed by p-toulenesulphonic acid (20 mg). After 1 h, the reaction was carefully quenched with sat. aq. NaHCO3 solution (5 mL), washed with water (100 mL), brine (70 mL), and concentrated in vacuo. The residue was purified by SiO2 column chromatography using 2% EtOAc/hexanes as eluent to give 2-(4-bromobutoxy)tetrahydro-2H-pyran (16.57 g, 88%) as colorless oil. TLC: 10% EtOAc/hexanes, Rf≈0.50; 1H NMR (CDCl3, 300 MHz) δ 4.58 (t, J=2.5 Hz, 1H), 3.90-3.72 (m, 2H), 3.38-3.50 (m, 4H), 1.92-2.04 (m, 2H), 1.65-1.80 (m, 4H), 1.60-1.50 (m, 4H). Lit. ref: G. L. Kad; I. Kaur; M. Bhandari; J. Singh; J. Kaur Organic Process Research & Development 2003: 7, 339. the reaction was carefully quenched with sat. aq. NaHCO3 solution (5 mL) washed with water (100 mL), brine (70 mL) concentrated in vacuo The residue was purified by SiO2 column chromatography

反应条件: temp:-65.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: Under the argon atmosphere, tert-butyl cyclopropylcarboxylate (3.76 g) and 2-(4-bromobutoxy)tetrahydro-2H-pyran (7.52 g) were dissolved in anhydrous/THF (106 mL), followed by cooling to an inner temperature of −65° C. A lithium diisopropylamide solution (2.0M, THF:heptane:ethylbenzene solution) (19.8 mL) was added dropwise over 15 minutes. After completion of addition, the mixture was stirred at room temperature for 8 hours. An aqueous saturated ammonium chloride solution was added to stop the reaction, and water, and hexane:ethyl acetate (1:1) were added, followed by extraction. The organic layer was washed with dilute hydrochloric acid, water and an aqueous saturated sodium chloride solution, and dried with anhydrous sodium sulfate. The residue obtained by concentration was purified by silica gel column chromatography (hexane:ethyl acetate, 98:2→90:10) to obtain the title compound (3.86 g) having the following physical property values. After completion of addition were added followed by extraction The organic layer was washed with dilute hydrochloric acid, water an aqueous saturated sodium chloride solution, and dried with anhydrous sodium sulfate The residue obtained by concentration was purified by silica gel column chromatography (hexane:ethyl acetate, 98:2→90:10)

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 16.0 g (105.0 mmols) of 4-bromobutanol was dissolved in 140 ml of chloroform, and a solution prepared by dissolving 13.9 ml (1.5-fold equivalent weight) of 3,4-dihydro-2H-pyran in 40 ml of chloroform was dropwise added thereto at 0° C. in an atmosphere of argon. The solution obtained was stirred for 4 hours while keeping it at 0° C., followed by addition of an aqueous sodium hydrogencarbonate, and the resulting solution was extracted with chloroform (100 ml×2). The organic layer obtained was dried with anhydrous sodium sulfate, and thereafter concentrated under reduced pressure to obtain 24.0 g of 4-(tetrahydropyran-2-yl)oxybutyl bromide (yield: 96%). a solution prepared was dropwise added at 0° C. The solution obtained at 0° C. the resulting solution was extracted with chloroform (100 ml×2) The organic layer obtained was dried with anhydrous sodium sulfate concentrated under reduced pressure