帕比司他

反应条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: (E)-3-(4-{[2-(2-methyl-1H-indol-3-yl)-ethylamino]-methyl]phenyl)-acrylic acid methyl ester hydrochloride salt (90 g, 233.8 mmole) is placed in a 4-necked reaction flask and methanol (475 g) is added. The suspension is cooled to −15° C. A solution of sodium hydroxide (28.2 g, 705 mmole) in methanol (419.2 g) is added to the suspension at −15° C. (addition time ca. 30 minutes), followed by the addition of the hydroxylamine solution (100.3 g of a 50% solution in water, corresponding to 50.15 g hydroxylamine, 1518 mmole) at, this temperature (addition time ca. 30 minutes). Caution: it is important to use different addition funnels for the sodium hydroxide and hydroxylamine solutions respectively. Stirring is continued at −15° C. for an additional 7 hours until a conversion of >99.5 area % is achieved according to HPLC. The reaction mixture is warmed to 0° C., stirred for 5 hours at 0-5° C., warmed to 20° C. and stirring is continued for 8 hours at 20-25° C. De-mineralized water (225 g) is added to the suspension at 20-25° C. during 30 minutes to obtain a solution. The solution is filtered and the filter as well as the filter pipeline are washed with de-mineralized water (225 g). The pH of the solution is adjusted to 10.3-10.7 by the addition of an aqueous hydrochloric acid solution (ca. 140 g of a 7.8 m/m % solution in water). Seed crystals are added as a suspension of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (80 mg) in water (5 g) and the mixture is stirred for ca. 30 minutes at 20-25° C., until a suspension is formed. The pH of the suspension is then adjusted to 8.5-9.0 by addition of an aqueous hydrochloric acid solution (ca. 108 g of a 7.8 m/m % solution in de-mineralized water) at 20-25° C. and stirring is continued for at least 30 minutes at 20-25° C. The solid product is isolated by filtration and the filter cake is washed with a 1:1 (v/v) mixture of demineralized water and methanol (140 mL). The wet product is dried at 45-50° C./5 mbar for 24 hours to obtain N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide. Yield: 81.15 g; 99.3% of the theory. HPLC analysis indicated 97.6 area % purity for the product, which comprised 3.2% w/w of water. The hydroxylamine content was found to be 345 ppm, which is sufficient for the preparation of the corresponding lactate salt with <5 ppm hydroxylamine. (addition time ca. 30 minutes) The reaction mixture is warmed to 0° C. stirred for 5 hours at 0-5° C. warmed to 20° C. stirring is continued for 8 hours at 20-25° C to obtain a solution The solution is filtered the filter as well as the filter pipeline are washed with de-mineralized water (225 g) The pH of the solution is adjusted to 10.3-10.7 by the addition of an aqueous hydrochloric acid solution (ca. 140 g of a 7.8 m/m % solution in water) Seed crystals are added as a suspension of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (80 mg) in water (5 g) the mixture is stirred for ca. 30 minutes at 20-25° C., until a suspension is formed stirring is continued for at least 30 minutes at 20-25° C The solid product is isolated by filtration the filter cake is washed with a 1:1 (v/v) mixture of demineralized water and methanol (140 mL) The wet product is dried at 45-50° C./5 mbar for 24 hours

反应条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: (E)-3-(4-{[2-(2-methyl-1H-indol-3-yl)-ethylamino]-methyl]phenyl)-acrylic acid methyl ester hydrochloride salt (90 g, 233.8 mmole) is placed in a 4-necked reaction flask and methanol (475 g) is added. The suspension is cooled to −15° C. A solution of sodium hydroxide (28.2 g, 705 mmole) in methanol (419.2 g) is added to the suspension at −15° C. (addition time ca. 30 minutes), followed by the addition of the hydroxylamine solution (100.3 g of a 50% solution in water, corresponding to 50.15 g hydroxylamine, 1518 mmole) at, this temperature (addition time ca. 30 minutes). Caution: it is important to use different addition funnels for the sodium hydroxide and hydroxylamine solutions respectively. Stirring is continued at −15° C. for an additional 7 hours until a conversion of >99.5 area % is achieved according to HPLC. The reaction mixture is warmed to 0° C., stirred for 5 hours at 0-5° C., warmed to 20° C. and stirring is continued for 8 hours at 20-25° C. De-mineralized water (225 g) is added to the suspension at 20-25° C. during 30 minutes to obtain a solution. The solution is filtered and the filter as well as the filter pipeline are washed with de-mineralized water (225 g). The pH of the solution is adjusted to 10.3-10.7 by the addition of an aqueous hydrochloric acid solution (ca. 140 g of a 7.8 m/m % solution in water). Seed crystals are added as a suspension of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (80 mg) in water (5 g) and the mixture is stirred for ca. 30 minutes at 20-25° C., until a suspension is formed. The pH of the suspension is then adjusted to 8.5-9.0 by addition of an aqueous hydrochloric acid solution (ca. 108 g of a 7.8 m/m % solution in de-mineralized water) at 20-25° C. and stirring is continued for at least 30 minutes at 20-25° C. The solid product is isolated by filtration and the filter cake is washed with a 1:1 (v/v) mixture of demineralized water and methanol (140 mL). The wet product is dried at 45-50° C./5 mbar for 24 hours to obtain N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide. Yield: 81.15 g; 99.3% of the theory. HPLC analysis indicated 97.6 area % purity for the product, which comprised 3.2% w/w of water. The hydroxylamine content was found to be 345 ppm, which is sufficient for the preparation of the corresponding lactate salt with <5 ppm hydroxylamine. (addition time ca. 30 minutes) The reaction mixture is warmed to 0° C. stirred for 5 hours at 0-5° C. warmed to 20° C. stirring is continued for 8 hours at 20-25° C to obtain a solution The solution is filtered the filter as well as the filter pipeline are washed with de-mineralized water (225 g) The pH of the solution is adjusted to 10.3-10.7 by the addition of an aqueous hydrochloric acid solution (ca. 140 g of a 7.8 m/m % solution in water) Seed crystals are added as a suspension of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (80 mg) in water (5 g) the mixture is stirred for ca. 30 minutes at 20-25° C., until a suspension is formed stirring is continued for at least 30 minutes at 20-25° C The solid product is isolated by filtration the filter cake is washed with a 1:1 (v/v) mixture of demineralized water and methanol (140 mL) The wet product is dried at 45-50° C./5 mbar for 24 hours

反应条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: (E)-3-(4-{[2-(2-methyl-1H-indol-3-yl)-ethylamino]-methyl]phenyl)-acrylic acid methyl ester hydrochloride salt (90 g, 233.8 mmole) is placed in a 4-necked reaction flask and methanol (475 g) is added. The suspension is cooled to −15° C. A solution of sodium hydroxide (28.2 g, 705 mmole) in methanol (419.2 g) is added to the suspension at −15° C. (addition time ca. 30 minutes), followed by the addition of the hydroxylamine solution (100.3 g of a 50% solution in water, corresponding to 50.15 g hydroxylamine, 1518 mmole) at, this temperature (addition time ca. 30 minutes). Caution: it is important to use different addition funnels for the sodium hydroxide and hydroxylamine solutions respectively. Stirring is continued at −15° C. for an additional 7 hours until a conversion of >99.5 area % is achieved according to HPLC. The reaction mixture is warmed to 0° C., stirred for 5 hours at 0-5° C., warmed to 20° C. and stirring is continued for 8 hours at 20-25° C. De-mineralized water (225 g) is added to the suspension at 20-25° C. during 30 minutes to obtain a solution. The solution is filtered and the filter as well as the filter pipeline are washed with de-mineralized water (225 g). The pH of the solution is adjusted to 10.3-10.7 by the addition of an aqueous hydrochloric acid solution (ca. 140 g of a 7.8 m/m % solution in water). Seed crystals are added as a suspension of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (80 mg) in water (5 g) and the mixture is stirred for ca. 30 minutes at 20-25° C., until a suspension is formed. The pH of the suspension is then adjusted to 8.5-9.0 by addition of an aqueous hydrochloric acid solution (ca. 108 g of a 7.8 m/m % solution in de-mineralized water) at 20-25° C. and stirring is continued for at least 30 minutes at 20-25° C. The solid product is isolated by filtration and the filter cake is washed with a 1:1 (v/v) mixture of demineralized water and methanol (140 mL). The wet product is dried at 45-50° C./5 mbar for 24 hours to obtain N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide. Yield: 81.15 g; 99.3% of the theory. HPLC analysis indicated 97.6 area % purity for the product, which comprised 3.2% w/w of water. The hydroxylamine content was found to be 345 ppm, which is sufficient for the preparation of the corresponding lactate salt with <5 ppm hydroxylamine. (addition time ca. 30 minutes) The reaction mixture is warmed to 0° C. stirred for 5 hours at 0-5° C. warmed to 20° C. stirring is continued for 8 hours at 20-25° C to obtain a solution The solution is filtered the filter as well as the filter pipeline are washed with de-mineralized water (225 g) The pH of the solution is adjusted to 10.3-10.7 by the addition of an aqueous hydrochloric acid solution (ca. 140 g of a 7.8 m/m % solution in water) Seed crystals are added as a suspension of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (80 mg) in water (5 g) the mixture is stirred for ca. 30 minutes at 20-25° C., until a suspension is formed stirring is continued for at least 30 minutes at 20-25° C The solid product is isolated by filtration the filter cake is washed with a 1:1 (v/v) mixture of demineralized water and methanol (140 mL) The wet product is dried at 45-50° C./5 mbar for 24 hours

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide (20 g) is placed in a 1 L glass reactor, and ethanol/water (209.4 g of a 1:1 w/w mixture) is added. The light yellow suspension is heated to 60° C. (inner temperature) within 30 minutes, and the lactic acid solution is added during 30 minutes at this temperature. The addition funnel is rinsed with water (10 g). The solution is cooled to 38° C. within 2 hours, and seed crystals (20 mg of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide lactate salt, anhydrate form) are added at 38° C. After stirring at 38° C. for additional 2 hours, the mixture is cooled down to 25° C. within 6 hours. Cooling is continued from 25° C. to 10° C. within 5 hours, from 10° C. to 5° C. within 4 hours and from 5° C. to 2° C. within 1 hour. The suspension is stirred for additional 2 hours at 2° C., and the product is isolated by filtration. The wet filter cake is washed with water (2×30 g), and the product is dried in vacuo at 45° C. to obtain crystalline anhydrous N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide lactate salt (form A). The addition funnel is rinsed with water (10 g) The solution is cooled to 38° C. within 2 hours seed crystals (20 mg of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide lactate salt, anhydrate form) are added at 38° C the mixture is cooled down to 25° C. within 6 hours Cooling is continued from 25° C. to 10° C. within 5 hours, from 10° C. to 5° C. within 4 hours and from 5° C. to 2° C. within 1 hour The suspension is stirred for additional 2 hours at 2° C. the product is isolated by filtration The wet filter cake is washed with water (2×30 g) the product is dried in vacuo at 45° C.

反应条件: temp:65.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (10.0 g) is placed in a 4-necked reaction flask with mechanical stirrer. Demineralized water (110.5 g) is added, and the suspension is heated to 65° C. (inner temperature) within 30 minutes. The DL-lactic acid solution is added to this suspension during 30 min at 65° C. During the addition of the lactate salt solution, the suspension converted into a solution. The addition funnel is rinsed with demineralized water (9.1 g), and the solution is stirred at 65° C. for an additional 30 minutes. The solution is cooled down to 45° C. (inner temperature) and seed crystals (10 mg N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide lactate monohydrate) are added at this temperature. The suspension is cooled down to 33° C. and is stirred for additional 20 hours at this temperature. The suspension is re-heated to 65° C., stirred for 1 hour at this temperature and is cooled to 33° C. within 1 hour. After additional stirring for 3 hours at 33° C., the product is isolated by filtration, and the filter cake is washed with demineralized water (2×20 g). The wet filter-cake is dried in vacuo at 50° C. to obtain the anhydrous N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide lactate salt as a crystalline product. The product is identical to the monohydrate salt (form HA) in HPLC and in 1H-NMR, with the exception of the integrals of water signals in the 1H-NMR spectra. The addition funnel is rinsed with demineralized water (9.1 g) The solution is cooled down to 45° C. (inner temperature) and seed crystals (10 mg N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide lactate monohydrate) are added at this temperature The suspension is cooled down to 33° C. is stirred for additional 20 hours at this temperature The suspension is re-heated to 65° C. stirred for 1 hour at this temperature is cooled to 33° C. within 1 hour After additional stirring for 3 hours at 33° C. the product is isolated by filtration the filter cake is washed with demineralized water (2×20 g) The wet filter-cake is dried in vacuo at 50° C.

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (20.0 g) was treated with D-(−)-lactic acid (6.8 g) according to the procedure described in Example 19 to obtain crystalline N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide D-(−)-lactate salt, anhydrate form. Melting point and decomposition take place together at 184.1° C. The XRPD pattern is as shown in FIG. 13E (2θ=9.9, 11.4, 13.8, 18.1, 18.5, 19.7, 20.2, 21.6, 25.2).

反应条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base (20.0 g) was treated with L-(+)-lactic acid (6.8 g) according to the procedure described in Example 19 to obtain crystalline N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide L-(+)-lactate salt, anhydrate form. Melting point and decomposition take place together at 184.7° C. The XRPD pattern is as shown in FIG. 13D (2θ=9.9, 11.4, 13.8, 18.1, 18.5, 19.7, 20.2, 21.6, 25.2, 29.9).

反应条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base form HA (2θ g) is placed in a 1 L glass reactor, and ethanol/water (209.4 g of a 1:1 w/w mixture) is added. The light yellow suspension is heated to 60° C. (inner temperature) within 30 minutes, and the lactic acid solution is added during 30 minutes at this temperature. The addition funnel is rinsed with water (10 g). The solution is cooled to 38° C. within 2 hours, and seed crystals (2θ mg of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide DL-lactate salt, anhydrate form) are added at 38° C. After stirring at 38° C. for an additional 2 hours, the mixture is cooled down to 25° C. within 6 hours. Cooling is continued from 25° C. to 10° C. within 5 hours, from 10° C. to 5° C. within 4 hours and from 5° C. to 2° C. within 1 hour. The suspension is stirred for an additional 2 hours at 2° C., and the product is isolated by filtration. The wet filter cake is washed with water (2×30 g), and the product is dried in vacuo at 45° C. to obtain crystalline anhydrous N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide DL-lactate salt (form A). The addition funnel is rinsed with water (10 g) The solution is cooled to 38° C. within 2 hours seed crystals (2θ mg of N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide DL-lactate salt, anhydrate form) are added at 38° C the mixture is cooled down to 25° C. within 6 hours Cooling is continued from 25° C. to 10° C. within 5 hours, from 10° C. to 5° C. within 4 hours and from 5° C. to 2° C. within 1 hour The suspension is stirred for an additional 2 hours at 2° C. the product is isolated by filtration The wet filter cake is washed with water (2×30 g) the product is dried in vacuo at 45° C.

反应条件: temp:65.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide free base form HA (10.0 g) is placed in a 4-necked reaction flask with mechanical stirrer. Demineralized water (110.5 g) is added, and the suspension is heated to 65° C. (inner temperature) within 30 minutes. The DL-lactic acid solution is added to this suspension during 30 minutes at 65° C. During the addition of the lactate salt solution, the suspension converted into a solution. The addition funnel is rinsed with demineralized water (9.1 g), and the solution is stirred at 65° C. for an additional 30 minutes. The solution is cooled down to 45° C. (inner temperature) and seed crystals (10 mg N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide DL-lactate monohydrate) are added at this temperature. The suspension is cooled down to 33° C. and is stirred for an additional 20 hours at this temperature. The suspension is re-heated to 65° C., stirred for 1 hour at this temperature and is cooled to 33° C. within 1 hour. After additional stirring for 3 hours at 33° C., the product is isolated by filtration, and the filter cake is washed with demineralized water (2×20 g). The wet filter-cake is dried in vacuo at 50° C. to obtain the anhydrous N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide DL-lactate salt as a crystalline product. The product is identical to the monohydrate salt (form HA) in HPLC and in 1H-NMR, with the exception of the integrals of water signals in the 1H-NMR spectra. XRPD indicated the presence of the anhydrate form. The addition funnel is rinsed with demineralized water (9.1 g) The solution is cooled down to 45° C. (inner temperature) and seed crystals (10 mg N-hydroxy-3-[4-[[[2-(2-methyl-1H-indol-3-yl)ethyl]amino]methyl]phenyl]-2E-2-propenamide DL-lactate monohydrate) are added at this temperature The suspension is cooled down to 33° C. is stirred for an additional 20 hours at this temperature The suspension is re-heated to 65° C. stirred for 1 hour at this temperature is cooled to 33° C. within 1 hour After additional stirring for 3 hours at 33° C. the product is isolated by filtration the filter cake is washed with demineralized water (2×20 g) The wet filter-cake is dried in vacuo at 50° C.