N,N,N',N'-四基(2-氯乙基)磷酰二胺

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 5-Hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate, 174 mg (0.387 mmol), and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 363 mg (0.996 mmol), were dissolved in 15 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 0.4 mL of 1 M solution in tetrahydrofuran (0.4 mmol), was added over a 10-15 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes under nitrogen. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 43 hours. Additional potassium tert-butoxide and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride were added over the next 4 days to drive the reaction to completion. After 4.5 days, the reaction mixture was diluted with ethyl acetate; and the ethyl acetate layer separated, washed with water and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC, and the product fractions combined and lyophilized, giving di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, compound 1CC, as a colorless oil, compound 1CC, 56 mg (18% yield), identified by HPLC and 1H and 31P NMR. Mass spectrum: 779 (C20H40Cl8N4O4P2S+4+H+). to warm to room temperature the reaction to completion After 4.5 days and the ethyl acetate layer separated washed with water and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N,N,N′,N′-Tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 636 mg (1.745 mmol), and bis(2-hydroxyethyl)sulfide, 1 mL (9.67 mmol), were dissolved in 8 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 1.8 mL of 1 M solution in tetrahydrofuran (1.8 mmol), was added over a 10 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 18 hours. It was then diluted with ethyl acetate; and the ethyl acetate layer separated, washed with 1 M hydrochloric acid and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate), and obtained as a colorless oil, 335 mg (42.6% yield), identified by HPLC and 1H and 31P NMR. to warm to room temperature and the ethyl acetate layer separated washed with 1 M hydrochloric acid and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate) obtained as a colorless oil, 335 mg (42.6% yield)

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 5-Hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate, 174 mg (0.387 mmol), and N,N,N′N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 363 mg (0.996 mmol), were dissolved in 15 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 0.4 mL of 1 M solution in tetrahydrofuran (0.4 mmol), was added over a 10-15 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes under nitrogen. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 43 hours. Additional potassium tert-butoxide and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride were added over the next 4 days to drive the reaction to completion. After 4.5 days, the reaction mixture was diluted with ethyl acetate; and the ethyl acetate layer separated, washed with water and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC, and the product fractions combined and lyophilized, giving di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, compound 1CC, as a colorless oil, compound 1CC, 56 mg (18% yield), identified by HPLC and 1H and 31P NMR. Mass spectrum: 779 (C20H40Cl8N4O4P2S+4+H+). to warm to room temperature the reaction to completion After 4.5 days and the ethyl acetate layer separated washed with water and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N,N,N′,N′-Tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 636 mg (1.745 mmol), and bis(2-hydroxyethyl)sulfide, 1 mL (9.67 mmol), were dissolved in 8 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 1.8 mL of 1 M solution in tetrahydrofuran (1.8 mmol), was added over a 10 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 18 hours. It was then diluted with ethyl acetate; and the ethyl acetate layer separated, washed with 1 M hydrochloric acid and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate), and obtained as a colorless oil, 335 mg (42.6% yield), identified by HPLC and 1H and 31P NMR. to warm to room temperature and the ethyl acetate layer separated washed with 1 M hydrochloric acid and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate) obtained as a colorless oil, 335 mg (42.6% yield)

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N,N,N′,N′-Tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 636 mg (1.745 mmol), and bis(2-hydroxyethyl)sulfide, 1 mL (9.67 mmol), were dissolved in 8 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 1.8 mL of 1 M solution in tetrahydrofuran (1.8 mmol), was added over a 10 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 18 hours. It was then diluted with ethyl acetate; and the ethyl acetate layer separated, washed with 1 M hydrochloric acid and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate), and obtained as a colorless oil, 335 mg (42.6% yield), identified by HPLC and 1H and 31P NMR. to warm to room temperature and the ethyl acetate layer separated washed with 1 M hydrochloric acid and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate) obtained as a colorless oil, 335 mg (42.6% yield)

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 5-Hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate, 174 mg (0.387 mmol), and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 363 mg (0.996 mmol), were dissolved in 15 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 0.4 mL of 1 M solution in tetrahydrofuran (0.4 mmol), was added over a 10-15 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes under nitrogen. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 43 hours. Additional potassium tert-butoxide and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride were added over the next 4 days to drive the reaction to completion. After 4.5 days, the reaction mixture was diluted with ethyl acetate; and the ethyl acetate layer separated, washed with water and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC, and the product fractions combined and lyophilized, giving di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, compound 1CC, as a colorless oil, compound 1CC, 56 mg (18% yield), identified by HPLC and 1H and 31P NMR. Mass spectrum: 779 (C20H40Cl8N4O4P2S+4+H+). to warm to room temperature the reaction to completion After 4.5 days and the ethyl acetate layer separated washed with water and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N,N,N′,N′-Tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 636 mg (1.745 mmol), and bis(2-hydroxyethyl)sulfide, 1 mL (9.67 mmol), were dissolved in 8 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 1.8 mL of 1 M solution in tetrahydrofuran (1.8 mmol), was added over a 10 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 18 hours. It was then diluted with ethyl acetate; and the ethyl acetate layer separated, washed with 1 M hydrochloric acid and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate), and obtained as a colorless oil, 335 mg (42.6% yield), identified by HPLC and 1H and 31P NMR. to warm to room temperature and the ethyl acetate layer separated washed with 1 M hydrochloric acid and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate) obtained as a colorless oil, 335 mg (42.6% yield)

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N,N,N′,N′-Tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 636 mg (1.745 mmol), and bis(2-hydroxyethyl)sulfide, 1 mL (9.67 mmol), were dissolved in 8 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 1.8 mL of 1 M solution in tetrahydrofuran (1.8 mmol), was added over a 10 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 18 hours. It was then diluted with ethyl acetate; and the ethyl acetate layer separated, washed with 1 M hydrochloric acid and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate), and obtained as a colorless oil, 335 mg (42.6% yield), identified by HPLC and 1H and 31P NMR. to warm to room temperature and the ethyl acetate layer separated washed with 1 M hydrochloric acid and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate) obtained as a colorless oil, 335 mg (42.6% yield)

反应条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: A 12-L, three-neck, round-bottom flask was equipped with an overhead mechanical stirrer, a thermometer and a nitrogen inlet/outlet bubbler. The flask was charged with N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidic chloride (979 g, 2.68 moles), 2, ethylene glycol (1.5 L, 26.8 moles), 4 and tetrahydrofuran (3 L). The stirrer was set to agitate at a moderate rate (to provide a clear red solution) and the mixture was cooled to 0° C. using an ice/water bath. To this cooled solution was added potassium tert-butoxide (362 g, 3.22 moles) over 20 minutes. The reaction mixture was then slowly warmed to room temperature and stirred for a total of 19 hours. A solution of hydrogen chloride in water (8 L, 1M) was introduced into the flask over 10 minutes. The organic fraction was collected and the aqueous fraction was extracted with ethyl acetate (2×4 L). The combined organic fractions were washed with saturated aqueous sodium chloride solution (1×4 L) and the solvents were removed under reduced pressure (30 mm Hg vacuum, final bath temperature at 50° C.) on a rotary evaporator to provide a dark reddish brown oil. This crude organic product was then dissolved with warm (40° C.) methyl tert-butyl ether (2 L) and allowed to cool to room temperature, stirring for a total of 14 hours. The resulting slurry was stirred for 30 minutes at 0° C. after which the precipitate was collected by vacuum filtration and washed with cold methyl tert-butyl ether (1 L). The combined filtrates were concentrated under reduced pressure (30 mmHg vacuum, final bath temperature at 50° C.) on a rotary evaporator to a volume of 500 mL and stirred for 30 minutes at 0° C. The resulting precipitate was collected by vacuum filtration and washed with cold methyl tert-butyl ether (200 mL). Two crops of solid product were then combined and dried overnight (30 mm Hg, 40° C.) to produce 2-hydroxyethyl-N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate, 3, as a tan powder (526 gm, 50% yield). TLC analysis showed one spot (Rf0.62; methanol:chloroform 1:9). Melting point: 76-78° C.; IR (KBr) 3372, 2957, 1459, 1344, 1206, 1098, 1053, 929 cm−1; MS (CI, methane) m/z 391(MH+), 353, 339, 248, 106. A thermal analysis (DSC) showed two exothermic decomposition ranges of 164-179 and 222-231 C. to provide a clear red solution) and the mixture The reaction mixture was then slowly warmed to room temperature stirred for a total of 19 hours The organic fraction was collected the aqueous fraction was extracted with ethyl acetate (2×4 L) The combined organic fractions were washed with saturated aqueous sodium chloride solution (1×4 L) the solvents were removed under reduced pressure (30 mm Hg vacuum final bath temperature at 50° C.) on a rotary evaporator to provide a dark reddish brown oil This crude organic product was then dissolved to cool to room temperature stirring for a total of 14 hours The resulting slurry was stirred for 30 minutes at 0° C. after which the precipitate was collected by vacuum filtration washed with cold methyl tert-butyl ether (1 L) The combined filtrates were concentrated under reduced pressure (30 mmHg vacuum final bath temperature at 50° C.) on a rotary evaporator to a volume of 500 mL stirred for 30 minutes at 0° C The resulting precipitate was collected by vacuum filtration washed with cold methyl tert-butyl ether (200 mL) dried overnight (30 mm Hg, 40° C.)

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 5-Hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate, 174 mg (0.387 mmol), and N,N,N′N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 363 mg (0.996 mmol), were dissolved in 15 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 0.4 mL of 1 M solution in tetrahydrofuran (0.4 mmol), was added over a 10-15 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes under nitrogen. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 43 hours. Additional potassium tert-butoxide and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride were added over the next 4 days to drive the reaction to completion. After 4.5 days, the reaction mixture was diluted with ethyl acetate; and the ethyl acetate layer separated, washed with water and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC, and the product fractions combined and lyophilized, giving di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, compound 1CC, as a colorless oil, compound 1CC, 56 mg (18% yield), identified by HPLC and 1H and 31P NMR. Mass spectrum: 779 (C20H40Cl8N4O4P2S+4+H+). to warm to room temperature the reaction to completion After 4.5 days and the ethyl acetate layer separated washed with water and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: N,N,N′,N′-Tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 636 mg (1.745 mmol), and bis(2-hydroxyethyl)sulfide, 1 mL (9.67 mmol), were dissolved in 8 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 1.8 mL of 1 M solution in tetrahydrofuran (1.8 mmol), was added over a 10 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 18 hours. It was then diluted with ethyl acetate; and the ethyl acetate layer separated, washed with 1 M hydrochloric acid and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate), and obtained as a colorless oil, 335 mg (42.6% yield), identified by HPLC and 1H and 31P NMR. to warm to room temperature and the ethyl acetate layer separated washed with 1 M hydrochloric acid and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude 5-hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate was purified by column chromatography (silica gel, eluting with 25% ethyl acetate/hexane and 100% ethyl acetate) obtained as a colorless oil, 335 mg (42.6% yield)

反应条件: temp:2.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

实验步骤: 5-Hydroxy-3-thiapentyl N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidate, 174 mg (0.387 mmol), and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride, 363 mg (0.996 mmol), were dissolved in 15 mL anhydrous tetrahydrofuran and cooled to 0-5° C. in an ice-water bath. Potassium tert-butoxide, 0.4 mL of 1 M solution in tetrahydrofuran (0.4 mmol), was added over a 10-15 minute period, and the reaction mixture kept at 0-5° C. for another 30 minutes under nitrogen. The reaction mixture was allowed to warm to room temperature and stirred at room temperature for 43 hours. Additional potassium tert-butoxide and N,N,N′,N′-tetrakis(2-chloroethyl)phosphorodiamidoyl chloride were added over the next 4 days to drive the reaction to completion. After 4.5 days, the reaction mixture was diluted with ethyl acetate; and the ethyl acetate layer separated, washed with water and brine, then dried over anhydrous magnesium sulfate, and the ethyl acetate removed under vacuum. The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC, and the product fractions combined and lyophilized, giving di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, compound 1CC, as a colorless oil, compound 1CC, 56 mg (18% yield), identified by HPLC and 1H and 31P NMR. Mass spectrum: 779 (C20H40Cl8N4O4P2S+4+H+). to warm to room temperature the reaction to completion After 4.5 days and the ethyl acetate layer separated washed with water and brine dried over anhydrous magnesium sulfate the ethyl acetate removed under vacuum The crude di[2-[[bis[bis(2-chloroethyl)amino]phosphinyl]oxy]ethyl]sulfide, 630 mg, was twice purified by preparative HPLC